Tyre puncture Repair kit tutorial

#tire #tyre #repair
You can follow the steps below to fix a car tire with puncture thread:
1. Before doing anything, you should park the car in a safe place and turn off the car engine.
2. To start, you need to prepare the necessary tools. It includes thread, scissors, air pump and windshield wiper.
3. Using scissors, make a small cut around the window rubber, in the neighborhood of the rubber. This cut should be large enough to insert the puncture thread into the tire.
4. Remove the puncture thread from the head of your tool and insert it into the tire through the small cut you made in the previous step. Try to insert the thread deep enough to catch the tire window.
5. Now, using your hands, slowly wrap the thread around the tire. This will cause the thread to wrap around the tire and seal the tire.
6. Now, using the air pump, inflate the tire to the proper pressure. Check whether the tire capture window is successful or not. If the tire deflates again, you need to repeat the windowing step or take it to a qualified repairer.
7. Finally, make sure the tire is fully inflated and ready to drive.
Note that threading the tire is a temporary method to repair the puncture and it is better to repair or replace the tire as soon as possible to avoid further problems.
please like and subscribe 🙏
/ @mechanic_mohamd
#flattyre

[@dar_hashiye]

Good luck ❤

[@mechanic_mohamd]

Tanks