How to replaceing an Expansion Coolant Tank on Peugeot 206,207,307. Peugeot coolant leak cheap fix

  Рет қаралды 877

mechanic mohamd

mechanic mohamd

Күн бұрын

#coolantleak #peugeot207 #coolanttank
To replace the Peugeot 207 expansion tank, you must follow the following steps:
1. Make sure the car is at normal temperature and the engine is cool. Replacing the expansion tank when the car is hot can cause high pressure to escape from the system, causing coolant to splash on you and injure you.
2. Before starting, make sure the car's heater is turned off.
3. Disconnect the car battery and remove the key from the car. This can reduce electrical hazards.
4. If present, drain the coolant from the system. Check if the air cooling system is open during draining.
5. Check if the air cooling system is connected to the expansion tank. If there is, disconnect it.
6. Using a wire hook, remove the slide clamps from the expansion tank. This wire hook can release the pressure from the system and reduce the possibility of refrigerant leakage.
7. Open the old expansion tank and disconnect it from the system. Make sure the coolant is properly drained.
8. Connect the new expansion tank to the system and make sure it is properly locked. Use sliding clamps to attach it.
9. Connect the hook wires to the new expansion tank. Make sure you place the clamps correctly and return pressure to the system.
10. Connect the air cooling system to the expansion tank, if you have already disconnected.
11. Return the coolant to the system and check its level. Add coolant if needed
12. Connect the battery to the car and turn the key.
13. Start the engine and check the cooling system for any leaks or other problems.
Note that these descriptions are a general guide for replacing the Peugeot 207 expansion tank. For more accuracy and technical details, refer to your vehicle's instruction manual. Also, if you do not have the necessary skills and experience to do this, it is recommended to go to a skilled and professional repairman.
please like and subscribe 🙏
/ @mechanic_mohamd
#car #mechanic #

Пікірлер: 2
@dar_hashiye
@dar_hashiye 9 ай бұрын
Good luck 👍
@mechanic_mohamd
@mechanic_mohamd 9 ай бұрын
Tanks
How to SUPER FLUSH your Cars Cooling System
22:07
ChrisFix
Рет қаралды 17 МЛН
Bike Vs Tricycle Fast Challenge
00:43
Russo
Рет қаралды 106 МЛН
The Joker wanted to stand at the front, but unexpectedly was beaten up by Officer Rabbit
00:12
🍉😋 #shorts
00:24
Денис Кукояка
Рет қаралды 3,7 МЛН
How to bleed the coolant Peugeot 207 1.4 8V 🚗
6:05
UseTool EN
Рет қаралды 14 М.
If You Can't Find the Source of Your Overheating Issue Watch This Video
8:30
Ratchets And Wrenches
Рет қаралды 496 М.
Engine cooling system / how does it work? (3D animation)
6:51
CARinfo3d (En)
Рет қаралды 1,3 МЛН
Peugeot 3008 P15B3 Additive Level Lower Than The Minimum Threshold
11:13
Does Pre-FILLING The Oil FILTER Cause Engine DAMAGE?
14:03
The Motor Oil Geek
Рет қаралды 2,9 МЛН
What's That Bubbling Sound In Your Car? Find OuT Fast
7:01
Budget Mechanic
Рет қаралды 368 М.
The Mystery of Ford Focus Coolant Loss: Unveiling the Answer!
4:37
Mr Auto Fixer
Рет қаралды 116 М.
Adblue fault P20E8. Explained and Fixed.
32:58
DiagnoseDan
Рет қаралды 97 М.
Bike Vs Tricycle Fast Challenge
00:43
Russo
Рет қаралды 106 МЛН