TyTags Australia shows you how to maintain and clean an OKI Printer.
Пікірлер: 34
@ellenj88962 жыл бұрын
Thank you for this very helpful vid! I really appreciate you taking the time to make the vid.
@rjkitto29 жыл бұрын
Excellent presentation - thanks very much, and I'll get to work later today ... really!
@iainwolstencroft3764Ай бұрын
Still helping people 12 years later
@clyderasmussen367810 жыл бұрын
Suggest you not use "spirits" on any rubber rollers. It will make them hard and loose adhesion. Use a cloth moistened with water and some detergent instead.
@JohannaMueller578 жыл бұрын
+Clyde Rasmussen so "spirits" is bad, "detergent" is good. veeeery helpful.
@clyderasmussen36788 жыл бұрын
+JohannaMueller57 After cleaning it rub the surface of the rubber roller and you can feel the difference. Over time the powdered clay from the surface of the paper adheres on the rubber pickup roller and then it begins to slip instead of feeding the paper into the printer. Same applies for the rubber feed rollers in the multi purpose tray. I am still running the original rubber feed roller after 141,000 copies. Same goes for the original feed belt and fuser by replacing the .06A fuses in these components when needed. New metal drums (Canon EX series, around $38) are available to rebuild your four original drum assemblies as well. I run two of these printers on my network and they still work perfectly. These printers are very affordable used as well. Buy your toner in the bulk 500g plastic bottles ($32-$35 each) sold for the model C9000 and refill yourself. :)
@daveemmal6 жыл бұрын
What a great video. Many thanks!
@jackkaplan6 жыл бұрын
Excellent video thanks!
@380mmzoom65 жыл бұрын
Does the fact that the wheel to turn the green drum roller round (like you do in your video) doesn't move on mine, indicate that the drum has become seized and knackered and perhaps it's time for me to invest in a new drum, please?
@1framistan3 жыл бұрын
In my OKI-C5100 printer, I fixed my "seized" roller by doing the following: 1...remove the print-cartridge. place it on a table with newspaper to protect the table (its gonna get messy). 2... flip the big latch at the top of the cartridge to UNLOCK the top TONER section from the bottom PRINTING section. set aside the top section. 3.... DUMP OUT all the toner from the bottom toner section so you can SEE the long metal rod which runs across the middle of the unit. You will see that the rod is CAKED with toner. THAT is the problem. There is so much toner CAKED onto that rod that the rod can no longer spin easily inside the bottom section. I used a flat-head screwdriver to GENTLY scrape all that caked toner OFF of that mixing-rod. Then I dumped out IN THE TRASH all that caked chunks of toner. Spin the plastic gear so you can get all sides of the rod cleaned. It would probably be a good idea to use a PLASTIC tool to scrape that metal rod, Instead of a METAL screwdriver. 4... Step four is CLEAN UP THE BIG MESS and take a shower and change your clothes. Wear a DUST MASK for safety during this procedure. Don't let your wife see the mess you made. I fixed 2 of my print cartridges by doing this
@georgezachariah83327 ай бұрын
Great, practical and useful video. Had a question. If there are bands of color toner on the transfer belt, is it a drum the culprit or transfer belt? I cleaned the transfer belt, but when I I print, it shows up again on the transfer belt and also on my print. Any suggestions?
@magik13387 ай бұрын
Any idea yet george? I am having the same problem; tried cleaning everything to no avail. just ordered a new drum, will see if that fixes it
@georgezachariah83327 ай бұрын
Thank you.
@Maisonier2 жыл бұрын
I have a c3400 and there is a red light blinking... (the warning sign) I have no idea whats the problem
@habbakuki3 жыл бұрын
Thanks a lot!
@JohnPerrott17 жыл бұрын
Very helpful thank you.
@blueslsd10 жыл бұрын
cheers for this thank you
@karancoyne77192 жыл бұрын
brillant vid
@loretolaudazi8805 Жыл бұрын
Hi, could you help me understand the problem I have with my OKI c822 printer it does not recognize the paper in tray 1, but the paper is inserted. what could be the problem? 491:No Paper Printer Alert Information ERROR Paper Out for Tray1 WARNING Paper Out Warning Could you help me? Thank you
@shaneholdenbottle14911 жыл бұрын
thank you very much sir
@gladstonemason51436 жыл бұрын
Hi thanks for the video, my oki c711 is printing ghost double Images how do I fix it
@58223756 жыл бұрын
don't forget the transfer belt
@MOTORRADMEISTER10 жыл бұрын
good help
@davidbenoit78183 жыл бұрын
spirit = rubbing alcohol?
@goldschuss24966 жыл бұрын
Where do I get printer brushes like those?
@melissamercer19787 жыл бұрын
When printing, I see an imprint of a paperclip, but can't find it. Any suggestions?
@andreasteiner84154 жыл бұрын
my guess is that you will have to take the machine apart and really look over it with a flashlight. but, the drum may be damaged if a paperclip was run through it. Maybe replacing the cartridge would remedy it if there's not paperclip found?
@JohannaMueller578 жыл бұрын
sorry, you say "don't breathe in the toner, it's not good for you" while dusting off toner with a pencil. so i assume with "breathing in" you mean sniffing it like coke?
@YoutuberChannelNL6 жыл бұрын
Dear mister in the video, I did exactly as you teach in your video, with the result that my drums are not working anymore. Unrecoverable damaged. I wish I had never followed your advice. To what address I can send my invoice for purchasing new drums?
@mercury43727 жыл бұрын
dude , dont bring this in bright light..........lolx
@ВладимирКозиков-д6н7 жыл бұрын
Rubbed with a cloth - and it's called cleaning?
@LekkerDops3 жыл бұрын
My OKIC810 is the biggest piece of crap every produced. Constant blobs of toner on the pages, always jams with regular Reflex paper, software is a joke. And you shouldn't have to clean drums like this video on a decent printer. My HP destroys the OKI. I honestly have never seen a bigger piece of crap printer in my life. Best way to clean it is at the tip, chuck it.