Ubiquiti Nanostation Setup - Step By Step

[@bobcondie2372]

Thank you for the excellent tutorial! I viewed at least 3 other videos to help me setup my NanoBeam AC Gen2's without success. I followed your steps and it came up first time!!!

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@thesuburbanedge6916]

Painted my house and accidentally reinstalled the station (receiver) upside down right before 7 days of RAIN. Yes, it filled with water. After drying out my station, I plugged it back and came back to your video...your same video has helped me set up initially, fix the whole system when I stupidly thought "resetting" it was the right answer and now, when I stupidly hung my receiver upside down in the rain. I was able to reconfigure my receiving station (leaving the dry one ALONE) and in no time, the system was up and running. This is the MOST helpful video out there regarding internet bridge configuration. You are a GEM! Thank you! BTW people out there reading this...don't give up if your station fills with rain. These things are built like tanks!

[@InformedGlobe]

This is how you explain things. Some other guys out there need to learn from this video. If you can't explain it you don't understand it.

[@UbergeeksBiz]

Thank you.

[@itsdukeduh]

My company uses watchfire/ignite op and have been looking for a video like this from them and they don't have one. I feel you have explained it way better than the actual company. I just wanted to say thank you

[@susanharding3462]

Thank you so much! As a complete novice, I have been able to set up our cctv in our stables. Such clear and straightforward instructions. Thank you!

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@SuperMadmax61]

Thank you for going step by step in one continuous video tutorial. Watched several videos on this subject and yours helped me the most, much appreciated !

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@cpeterson3553]

Thank you so very much for this tutorial. I upgraded my router and have been having a real time trying to get my Loco M2's to talk to each other again. I had been able to get them both online, but they wouldn't talk to one another.... I 'm not sure what step you had me change but viola they have signal!!! Now to just re install them on their respective buildings, re-connect the router in Building 2 and then update all the wi-fi devices. Again after two weeks you got me back on signal...Thank You.

[@jofo8880]

This is a great tutorial. Super clear and concise. You're a great teacher. Thanks for your help.

[@AnyangAbraham]

Thank you so much for you humble explanation, you deserved million of appreciation from all your viewers. you have really help me today for my examination. am a South Sudanese living in Africa..(.Basketball country)

[@dennisdanseglio5432]

This was an amazing tutorial. Thanks so much for not even missing a step!! So grateful !

[@drh3rd]

Again fantastic video. You explain, teach, instruct, exceedingly better than anyone in your videos. You make a great teacher.

[@ReaghNetwork]

Superb job explaining step-by-step set up by an obvious professional. patient and thorough, thank you

[@StonecreekCabins]

Incredible video! You made the easiest to understand tutorial that I have come across. Excellent work. Thank you so much!

[@3ple5tech73]

Am so impressed. You took your time well to explain. You are a good and great teacher. Thank you very much.

[@UbergeeksBiz]

You're very welcome!

[@phasor00]

Great tutorial! Very informative and helpful for those of us that are not network tech experts.

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@apostolosn5536]

Hi and thanks for the tutorial. Once connection is established between the two units is it normal for the signal strength indicators to blink or should they always be on ?

[@ralphlayman6840]

Just ordered my new nanostations to get signal from my house to pole barn. Your detailed video will no doubt be much needed help to get things set up. Thank you!

[@UbergeeksBiz]

Glad it helped

[@tompetrzelka9612]

Thank you!! This video did everything but get on the roof for me. Terrific!!!

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@louburgese1795]

Great video! Very helpful and informative with the step-by-step directions thank you

[@uc6325]

Can I tell you something?, You are a great teacher, even a dummy will understand you. Thanks a lot

[@justathought256]

Wonderful video you are the only person that explained everything

[@coop802]

Good video for Sigle station setup. In most cases though one would want to setup an additional router connected to Building B. You should continue this video in that direction showing the setup on the new router.

[@UbergeeksBiz]

Thanks for the info!

[@jamestarmedia3161]

thank you, what i didnt understand is which particular setting makes the two see each other, connect to each other. AP and Station

[@bakgatfromgb]

What a phenomenal video. For the beginner, this is the best set up on KZbin. Could you do a video on how to set up to a UAP-AC-LITE/LR/PRO. Many thanks

[@UbergeeksBiz]

Great suggestion! Will do more ubiquiti products

[@jenniferbrown4021]

Lifesaver! This was exactly what we needed and made the setup super easy.

[@UbergeeksBiz]

I'm glad it helped.

[@pauldoyle206]

This is absolutely the best video I've seen on how to hook up these units is it possible that you could do a point-to-multipoint video thank you

[@UbergeeksBiz]

Okay, I'll try to do a video of point-to-multipoint

[@ciaranmahon8167]

Thank you for your very clear instructions. If I want to use the station to transmit cctv from my shed can I recieve the transmission in two locations? IE at my office and at my house which are all in close proximity. Do I need 2 stations and 1 access point or 1 station and 2 access points.

[@UbergeeksBiz]

You can have 1 access point (A) and 2 stations (B)

[@brianwake100]

Best setup video yet. No step missed. Great 👍 👌 👍 👌 👍 👌 👍 👌 👍 👌 👍 👌 👍 👌

[@UbergeeksBiz]

Thanks

[@jlkkauffman7942]

I still can't get mine to work

[@UbergeeksBiz]

@@jlkkauffman7942 Which part you need help with ?

[@jlkkauffman7942]

@@UbergeeksBiz thanks for your reply, I couldn't get them to prgram right I kept getting invalid ip configuration, but I finally got it but have slow speed and I just found out that some of my ethernet cables aren't making good connection so that was making it more confusing. I'm a farmer, not into IT at all so I had no clue, but I'm going to either get some new cables or try and put new ends on these.

[@UbergeeksBiz]

@@jlkkauffman7942 Oh... this setup I did was actually for a farmer as well. He has acres of flat land and needed internet across the field. If you have slow internet connection, try to increase the Output Power 11:20 a little higher if your M2 are far apart. Also increase internet speed from your internet provider may help. Good luck with changing out the ethernet cable. CAT5E or CAT6 will do.

[@deantaylor5677]

Very thorough and I am set up. Thanks for creating this!!

[@markmiller2642]

Excellent video! I used it last summer to bring internet from my home to a cottage on my property. Now I am hoping to do the same for another rental about 1/4 mile away. Problem is that it is up a hill in the forest. First question is do I need a clear sightline to get the signal and secondly, can I install two units in from one "building A"?

[@UbergeeksBiz]

You are welcome. Glad the video helped. Best is to have clear sight. Yes, you can have two Access Point in Building A

[@joekocher9369]

Great video! I have a pair of LocoM5’s (same setup as M2) I am losing approximately 50% bandwidth across wireless bridge. (120Mbps to 60Mbps) Are the Nano’s bidirectional, or does the ISP need to go into the AP Nano? I can’t seem to find the setting that is incorrect. Distance is about 600’, I would think there should be little to no loss. Thanks for any help!

[@Mohamed6s]

Very comprehensive and very clear explanations. Thank you very much.🎉

[@UbergeeksBiz]

You are welcome!

[@jasonkh07]

Thank you for your great video. I had a question, I want building B to have WiFi without having to buy a router. Can I setup WiFi using the secondary LAN port on the nanostation m5 and buy a nanobeam and set it as an access point? Or what do I need in order to create that WiFi coverage in building B? If you can help recommend a ubiquiti model you use for it that would be helpful. Thank you again.

[@wifilabxyz]

you can use the second port and connect an access point for your wifi.

[@UbergeeksBiz]

You do not need to have second router in B building. You can have access point coming out of B building LAN port. Hope this access point ubiquiti help: amzn.to/354ndJN or amzn.to/2X5boPi

[@1945bill3]

Finally set up what I though would be communication between the AP and Station BUT although the new 'Ubiquiti' wireless network is listed, the computer will not recognize it and I can not enter the password. Must the 'Ubiquiti' wireless network have the same SSID as my main wireless network or can it have a different SSID?

[@annashakespear5573]

Really helpful video. Simple question: so to get wireless wifi in building B (I note you still had a LAN cable connected for building b laptop), do you need a router in building b? Also, can you run two sets of nano if you have two buildings to beam to? On our property we have Starlink (wifi5) in our main house and need to extend this to a studio approx 40m away and a cottage approx 30m away. Is 2 x nano set up the best way to go or is there a better way to do it? Also, do Ubiquity products work on both wifi 5 and 6? As the Starlink modem only has one output, do I need a POE switch if running two nano set ups? (I already purchased the Starlink ethernet adapter). Thanks in advance!

[@BlackOpsPound]

I have the same question. Need two sets of nano for 2 buildings. Did you ever find an answer?

[@bellashakespearable]

@@BlackOpsPound No I didn't get an answer unfortunately. Would still be interested to know!

[@emmanueledako1807]

You need 2 Nano. Point to Point. Then connect the NANO in building B to a router or Access Point to broadcast the WIFI in building B

[@louburgese1795]

Great video, exactly what I was looking for. Thank you! Question, in other comments you mention connecting an access point to the nano station at building B to set up a WiFi network at building B. If I want WiFi plus hard wired connections at building B (hard wired Ethernet to a TV), would I have to use a switch and the access point at building B?

[@UbergeeksBiz]

Once you have the A and B working, you just need to connect a new router to B. The new router will broadcast WiFi and LAN slots for other devices. Or expand to a network switch for more LAN ports.

[@pipitkiswieantoro6753]

Thanks a lot for all the explanation. Very clear indeed. Help me a lot.

[@UbergeeksBiz]

Glad it helped.

[@pipitkiswieantoro6753]

@@UbergeeksBiz Give small suggestion at 22:16, after select SSID better to activate Lock to AP (based on MAC Address). So, put in 68:72:51:7C:49:19 into Lock to AP. This process is to ensure that the station is connected to the correct and appropriate AP if there are multiple APs with the same name, namely PK-WiFi. What do you think ?

[@UbergeeksBiz]

@@pipitkiswieantoro6753 Yes. You can do that AP lock the MAC address. Thanks for your great suggestion.

[@LazerWonder1998]

Followed your direction except that I used one PC and one Mac computer... but followed all the steps. Works perfectly. THANK YOU!!! :) Also, it didn't take long at all -- maybe 15 - 20 minutes in total?

[@UbergeeksBiz]

You are welcome. I'm glad the video helped.

[@alisarhodes167]

Omg! This is where I’m currently stuck. I don’t have a connector for my surface pro so had to switch after setting up Building A & try and use our old Mac for the building B portion. Any tips? I tried looking up other videos that use Mac as a setup but the IP address they used was different and I have not succeeded yet. I can’t get past opening browser and typing in the IP. It doesn’t open anything says it’s not connected to server. Thanks for your help and seriously the best video I’ve ever seen I think I would have had no problem had I not needed to switch comps.

[@AhlstromTomas]

Amazing! This made my day. Was about to give up when I this video helped my. It works!!!

[@davidpilcher923]

Great video. Am trying to set up a second receiver, repeating the same process. But it does not work. Is there something else that needs to be done ?

[@UbergeeksBiz]

Second receiver ? Are you trying to have 1 A and 2 Bs ?

[@jameswright1193]

Thanks so much for the very detailed video. I'm having a problem accessing the app to configure the first nanostation. I've checked that the IP is correct but when using the Web browser the connection times out. Any ideas?

[@grantzoghby]

Thanks for an amazing set up demo - my 1 question - does nanostation B require just the POE cable plugged in or does it require POE AND Lan?

[@bekaru2]

I was wondering the same

[@franklidgad]

POE and LAN. The LAN port is to connect to your device in Building B. Whether it be another computer, a router or switch(hub) depending on what you plan to use in that building.

[@latishateriini638]

Hiya great video was very informative. Buut... I have programmed both nano stations and mounted them in their respectful places. But now I am not getting internet in building b. I have a UniFi ap outdoor setup but is showing a steady orange. Do I need to reset and reprogramme the AP somehow? Do I need to go to building A to do this? I can get internet in building b through the Ethernet cord into my laptop but when I connect Ethernet back to the AP nothing happens. Please help.

[@randypreuss4024]

Followed step by step your setup instructions. Have connectivity between the two stations but cannot get Wi-Fi. Have good signal on cable coming from router but no internet at the station. What am I missing? Also cannot find the ubiquity network on my iPhone. I have the Unifi app on my iPhone and it does recognize the 2 devices.

[@utkarshgautam2127]

Thanks a ton for taking the time and making this thorough video. I see a mode of AP repeater on Ubiquiti Nanostation device. If I configure Building B's nanostation Wireless mode as an AP repeater, would I be able to connect WiFi clients to this AP repeater using the same SSID that the two nanostations use to communicate to each other? I am trying to avoid having an additional access point in building B. Any thoughts?

[@UbergeeksBiz]

No. You cannot set building B as AP. Building B is Station, looking to connect with building A (the AP). A & B only talks to themselves. They cannot talk to other client's devices (like iPhone, iPad, laptop...etc). What you need to have is building B wire LAN out to another Access Point amzn.to/3gCeAN9 this will provide WiFi to your client's devices

[@mattwhite8261]

@@UbergeeksBiz I'm getting a ssid broadcast but not able to connect devices refuse too. Any clue?

[@jasontucker5121]

How many IP cameras can I connect to the station using a plug and play multi-port POE switch. The cameras are powered by the switch. Thanks for your videos.

[@UbergeeksBiz]

As many as your multi-port POE switch can handle your IP cameras.

[@cameronfrancis6319]

Hi there, would just like to confirm, I see on both A & B station you connect POE to "Main" port on both stations. So I am assuming its not necessary to use Secondary port on either A/B Stations at all?

[@ahuber8409]

great instructions - will this also work for the ubiquiti nanostation loco m900 ?

[@UbergeeksBiz]

Yes. Same concept

[@Rubiodiamante]

A brilliant setup video, thank you for sharing. Is this the best solution to transmit the video feed from a POE IP camera to an NVR which is in another room of the house? I have used a Wifi range extender but the connection drops several times a day thus the NVR gets a wonky video feed.

[@UbergeeksBiz]

Yes. You can absolutely connect POE IP camera and DHCP it. Will work perfect for you

[@ShadabAnsari-no1op]

Thank you sir I'm very very happy & I'm from India

[@jdklein33]

Your video was very helpful when followed step by step, thank you so much! One problem is that it isn't shown or explained how to configure the WIFI router in the recipient building to the station unit on that building. I plugged the LAN cable from the POE into the WAN port of my router but what are my settings on the router to pass through the connectivity? Thank you

[@UbergeeksBiz]

Once you confirmed internet going thru Building B by using hard wired from LAN to PC, then you can use any router connect to LAN. Router will be DHCP from ubiquiti B

[@jdklein33]

@@UbergeeksBiz thank you. Does the router have a unique SSID for clients in the guest building or do I need to mirror the SSID used in the source building?

[@UbergeeksBiz]

@@jdklein33 Yes, the router will have a new SSID and PW. You are not mirroring the SSID from building A

[@johnpego454]

1) can I set up the two units with only one laptop? 2) What step made the "b" building a receiving unit and not the sender. 3) do you have a video on how to broadcast the signal through building "B?" Thanks, great video

[@UbergeeksBiz]

1. Yes, you can setup with just one laptop. 2. "B" building as receiver because device is setup as "Station". 3. No, I do not. But once you have A and B talking and working with each other, you just need another router in B building to broadcast wifi

[@65052]

@@UbergeeksBiz when you setup with one computer do you just unplug the the device and then start on the second one or does it need to stay powered up?

[@UbergeeksBiz]

@@65052 You must keep the "A" stayed power. You need "B" to search for "A" to finish the setup.

[@IMiss_The90s]

Question The wifi at my house is great. Strong signal. All good. My shop is 200ft away. Good signal outside shop but weak inside because it's a steel building. Do I just need one NanoStation Loco M2. Mount it outside shop. Power it up POE. Then run the ethernet from that to my wireless router in order to have WiFi in the shop?

[@UbergeeksBiz]

You need two NanoStation Loco M2. From house (A) send signal to shop (B). From B, hardwire to a new router for WiFi in shop use only. amzn.to/3z0rNIy

[@MonkOfMonza]

Great tutorial! One question: how much latency in ms does this bridge add for the distance you have to cover?

[@UbergeeksBiz]

15-25ms

[@yereemanass1705]

Thanks for that detailed step by step

[@UbergeeksBiz]

No problem 👍

[@coletteknight2626]

Hi thank you very much for these directions. They have worked wonderfully, twice. I was up and running for about 6weeks perfectly and then lost internet without explanation. My devices were connecting to my router but there was no internet being received. I reset to factory settings and followed instructions again and got my internet back at B building. Now it has happened again that I have lost my internet again after about 4weeks of working perfectly. Do you have any idea what is happening? The lights on both nano stations are lit properly the whole time. So it appears they are still communicating? Any suggestions would be appreciated. Thank you

[@UbergeeksBiz]

When the internet goes down, can you login to Nano M2 ? This is to determine which Nanostation is down.

[@gasmymedia]

Thank you so much for the video. My problem is : I forget the password to login the nanostation. How can I recovery it, bypass it or reconfigure it ?

[@franklidgad]

There is a reset button inside next to the ethernet port. Of course by doing this you will lose your configuration and have to start over.

[@Angeltg36]

Thank you for the videos, they are very helpful and you are an excellent teacher.

[@UbergeeksBiz]

You are welcome. Glad the video helped

[@hesbonkoome4689]

This is interesting, super detailed. I did all the steps but I am surprised I can't connect to the internet yet, it says "Denied access to the network" any help please

[@svetusik72]

Thank you for such a nice tutorial. Are the instructions the same for NanoStation Loco M2? It’s half size of the one you used.

[@UbergeeksBiz]

Yes. Same process

[@svetusik72]

@@UbergeeksBiz thank you

[@svetusik72]

@@UbergeeksBiz do I also need to buy their router or any router will do (I have Netgear router that is not in use). I’m planning to broadcast from starlink (building A). So I plug in the first one into starlink router. And broadcast to building b and connect it to another router there.

[@UbergeeksBiz]

@@svetusik72 Any router will do. The old netgear can go to building b

[@augustinbadohoun7924]

Thank you, Great JOB , EXCELLENT tutorial

[@immofreund1996]

Very good. Thanks and Regards from Germany

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@CT_Studd]

Fantastic video, thanks for the help!

[@issa570]

Are you sure there will not be address conflict on both router and AP ?

[@kconnorsd]

This is a very helpful video. What should I do for configuration if the only computer I have to use is a macbook pro, which doesn't have the option to plug in the LAN cable? I will need to be setting this up using my current WiFi and this computer - I don't have access to anything else. Thanks!

[@UbergeeksBiz]

Hi, you need to have ethernet to configure. If you are using Macbook Pro. Maybe try this adapter: amzn.to/2OuTTGO

[@GrateChef1]

Excellent video, thank you. I purchased your recommended hardware. Setup complete, all lights on.

[@UbergeeksBiz]

You need to have a router in building B for WiFi. The building A (Access Point) broadcasting WiFi SSID - Only for B to connect. Not your iPad, or iPhone or...etc to join

[@mikewilson881]

Thank you for the video. I did the steps on the station and the signal lights blink 5 time then off a little; then blink again. What did I do wrong?

[@donpowell4025]

Will the base station (connected to the router via LAN) be broadcasting as well (have an SSID that other devices can connect to)? I am only asking this because I have two houses... that one that has the router (say house A) has weak wifi throughout due to it being a concrete structure... I was wondering having the router at the back of the house (house A).... connecting to station installed at front of house A (beaming to house B). Will people sitting in from of house A able to connect to said device for better service...

[@UbergeeksBiz]

A can only talk to B. A cannot broadcast WiFi for devices (iPhone, iPad...etc). If you need better signal in A building, you need a separate Mesh WiFi system to broadcast WiFi for devices. Recommend Google Mesh WiFi = amzn.to/3kMdTl6

[@robpetrucci3434]

Excellent work! very clear. Help me a lot

[@helmutds1972]

Hello I recently bought this two antenas and this is the only tutorial that works for me, but I have a speed cap, the network is 500 Mbps but it only transfer 10 Mbps, is there any config that helps me to improve internet speed?

[@michaelsikalinda8498]

Can't nanostation from building A supply wireless internet to building B if the distance is short without nanostation in building B?

[@peterdeg634]

Thanks for taking this time! I wondered, when I unplug the device for building B, and bring it to the actual building, and plug it back into the socket, will it automatically connect with building A, which is plugged in? Or should I scan again?

[@UbergeeksBiz]

Once you configured correctly on A and B, you can just unplug and move it around. The settings will not change.

[@arditgjondedaj6143]

@@UbergeeksBiz cant it get wifi signal from modem 600 m away without puting another station loco bridge there?

[@UbergeeksBiz]

@@arditgjondedaj6143 cannot

[@ThomasMackley-l2z]

once you setup both M2's, and they are mounted to a building, does the M2 on Building B act as an access point or do i need to provide an access point to building B for a laptop to have a wireless connection?

[@leeelzemeyer4047]

Should the building B show a wireless network available on your devices? It would be the one setup in the nanostation.

[@UbergeeksBiz]

B only catch WiFi signal coming from A. B cannot broadcast WiFi for you iPad, iPhone or laptop to connect.

[@jeffwiseman1301]

Thank you sir! Nice video. Great explanation as well.

[@UbergeeksBiz]

You are welcome

[@mikemcclain3869]

Will the internet at the farthest point still have the same SSID name as my home router?

[@CashJohnston]

It seems like you got these devises communicating with each other using two PCs. However, if you only had one computer, you would need to disconnect the one. so Im sure I follow how to do it with just one computer.

[@serverlan763]

How perfectly do they have to be aligned? Can one be higher than the other if say they are only 200 meters apart?

[@andreamyers3317]

Thank you!! Great video, very thorough instructions!!

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@nedthe3rd]

You are awesome and so is this video! A hundred times thumbs up!! As some others have commented, I am also using this to get wifi in B building. Do I need to also know the configuration settings to set up the access point for spreading the internet in B building?

[@UbergeeksBiz]

Thank you for your comment. What you can do is to get any Router --> amzn.to/2M6zTtw and connect to Building B LAN port. Or access point --> amzn.to/3pskH8n and connect to Building B LAN port. Good luck !

[@nedthe3rd]

@@UbergeeksBiz Thank you. I just ordered the router. I will let you know how the set up goes. Keep the videos coming. I haven't found anyone as thorough as you!! 😁And I loved the drawing!

[@UbergeeksBiz]

@@nedthe3rd Thank you !

[@nedthe3rd]

I set it up and it works great! I am getting up to 50 mbps across a 500 foot distance. I couldn't have done it without your help! Thank you, thank you!!🤗

[@nedthe3rd]

@UberGeeks Please help! I can't log in to the nanostation now that it is set up. 192.168.1.20 says unable to reach even after setting that as a static IP adress.

[@simongitonga4908]

when configuring, must the two nanostations (access point and station) be at the same place? or with the configuration settings go through if the two devices are far apart, let say 1km

[@DalwynTaylor]

Does your computer have to be plugged directly into your router via ethernet cable when configuring your M2 or can it be connect via wifi?

[@franklidgad]

It's best to perform the configuration plugged directly into your computer just as the video shows.

[@Attn2003]

What does it look like to have a combo router/switch/WIFi AP instead of just the PC?

[@abdullahiabubakar4825]

Good day everyone, I followed this tutorial and configure my radios, however I cannot access my camera on the switch attached to the station, I even tried to ping but in fact i couldn't ping anything on the station side.

[@Brandonhatesmayo]

Can this be used just to extend your current internet Wi-Fi like a router?

[@UbergeeksBiz]

No

[@johnsutton3182]

Brilliant tutorial .. How do I setup a nanostation m2 looking at at hotspot and connected to a router ..? I have tried, but the lights on the m2 connect, then disconnect and then connect again repeatedly .. Any ideas ..?

[@UbergeeksBiz]

Do you mean hotspot is dropping bandwidth ?

[@johnsutton3182]

@@UbergeeksBizThanks for your reply .. I don't think so .. I am trying to connect my M2 to a local Wi-Fi Hotspot .. I can see the hotspot on the list of connections and I select it .. I apply all the changes, but it does not connect .. I cannot see any signal strength on the main page .. Can't work it out ..!

[@UbergeeksBiz]

@@johnsutton3182 This Ubiquiti setup is for Nano M2 (A) talk to Nano M2 (B) to carry bandwidth. Not a HotSpot talking to Nano M2 (A)

[@johnsutton3182]

@@UbergeeksBiz Hello again .. Yes I do realise this, so what I have done is used your setup for building 'B' as my station and have been trying to connect to the Hotspot using the Wi-Fi signal list to find the Hotspot signal which is visible and at a good strength .. -64dbm .. I now have an added problem, I cannot get the M2 to factory reset, using either the reset button on the M2 or on the PoE adapter .. So I can connect the the login page on my PC ..! Lord help me now ..!

[@johnsutton3182]

I have after resetting numerous times, managed to access the login page again, but I am back to square one ..!

[@rakotondrasoahary5795]

Does it gives you an IP conflicts if you set the same IP on both devices?

[@clearviewbiblechurch1011]

Just to be clear, these Nanostations are to be mounted on the outside of the buildings, not inside the attic or inside the building?

[@UbergeeksBiz]

You can mount inside the building. Just have to point to the second nanostation

[@edwardsampson845]

I love u man keep more coming please I want a video for full fibre installation and running of cables

[@UbergeeksBiz]

Will do

[@АлексейКотельников-в5т]

Добрый день!!! Пожалуйста подскажите: Почему при сканировании и поиске точки доступа "А" в списке найденных WiFi к некоторым точкам невозможно подключиться?

[@1945bill3]

Must the SSID/password combination used to configure the Nanostation units be the same SSID/password combination used in my home?

[@erickmutala5372]

Good work very helpful video 🤝

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@seekfactsnotfiction9056]

What does this device do? I was asked by a relative to buy him this device because everytime i call him the call and the video quality is very poor and connection is bad! Does it help the speed? Is it like a modem or a mesh router? How can i send to Yemen through Amazon? Or if there's a better way to ship let me know. Thanks

[@djpeaceofmind2851]

Can you explain How logging back into the antennas will work after setting the IP4 back to auto and since they both will be running on DHCP

[@UbergeeksBiz]

The wait time should not be more than 5 minutes

[@djpeaceofmind2851]

@@UbergeeksBiz No how do you log back into the antennas to change things later on say to update and stuff. Now that the DHCP auto assigns and IP address to it how do we find that and log into it

[@wifilabxyz]

you can use the discovery utility tool of ubiquiti to determine the ip address.

[@queenservices1655]

thanks dear sir, it's crystal clear thanks again

[@UbergeeksBiz]

You are welcome. Glad it helped.

[@timwalker8544]

I dont know what I'm missing. I have this set up like the instructions said. I have tried setting the addresses to static and DHCP. I can see the AP and the station, but I cant get any internet when plugging my PC into the station.

[@leonardocaraballo1407]

puedes exolicarme que dentrdo de advance de la natena nano loco m2 sale Antenna Settings: vertical y horizntal PARA QUE ES?

[@waynemccauley3862]

Excellent video, thanks for making this.

[@kolomolo7540]

Разжували прям до мелочей 👍

[@UbergeeksBiz]

Thank you

[@BIZHUBMAN]

Perfect instructions!