How to Disassemble and clean Springfield Hellcat Magazines

Harry from UBR Tech shows you how to disassemble and clean Springfield Hellcat Magazines.
This video is to show you how to assemble and disassemble purposes of repair or maintenance only.
Check out GunPrime here: bit.ly/3mTvMhS
Follow me on Instagram @UBRTechInc
Subscribe for more UBR Tech content @UBR Tech
Please support our channel by donating $. All donated money goes to the channel only.
paypal.me/UBRTech

[@TheRumblewagon]

Take your tool, put it into the hole. Timeless advice throughout the millennia.

[@UBRArsenal]

As Quagmire from Family Guy would say Giggity!! Hahaha!

[@diamonda8464]

I never knew that you could clean the spring. Thank you 🙏🏾

[@50ShadesofGreg]

was panicking about my 13 rounder and your video saved my day. earned my sub and my respect. cheers!

[@UBRArsenal]

I’m so glad the video helped out. Thanks for watching, leaving a comment, and especially subscribing. Have a great day. 👍🏼🤜🤛

[@Imthatdude97]

@@UBRArsenal😂

[@Pewpewnation123]

My guy don’t use clp on the spring. You don’t want to oil you mag springs as that is what causes powder to stick to it. Use a bore solvent that does not also Lubricate. It won’t hurt nothing but you will have to clean it so much more often if you use clp

[@rondeliajohns625]

I have been avoiding cleaning the magazines because it seemed it would be a challenge. I breezed through it after watching your video. Short, easy to understand, thank you!

[@UBRArsenal]

Hi Ron, I’m glad the video made it a breeze. Thanks for watching and leaving a comment. Have a great day.

[@tillmerit8431]

U guys know how to disassemble the 15rd mag??

[@NinetyMinusTen]

Great How-to video. I've seen so many that are full of "um's" and "ah's" that make them painful to watch. You did a great job on not only the content but the production as well.

[@UBRArsenal]

Hi Eighty, I'm so glad to hear you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@VladPutinsDad]

wow thank you! i had disassembled my 13 rounder and couldn’t get it back together for the life of me! the trick was pushing in on the black tab apparently. i appreciate it.

[@UBRArsenal]

Hi Tommy, I think that gets a lot of people. I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. 😁🤜🏼🤛🏼

[@LesterMMolinaR37]

Gracias por el video. Llevaba una hora tratando de instalar el magacín de 13 y no caía, hasta que aprendí en tu video que había que empujar con el dedo una vez instalado. ¡Dios te bendiga!

[@UBRArsenal]

Hola Lester, no hablo español, pero voy a usar la aplicación de traducción en mi teléfono. Espero que esto funcione. Me alegro mucho de que el video haya ayudado. Muchas gracias por ver y dejar un comentario. Que tengas un gran día.

[@LesterMMolinaR37]

@@UBRArsenal Forgive me for writing to you in Spanish. I don't speak English and I should have done what you did, use Google Translator, hahaha! Thanks

[@UBRArsenal]

@@LesterMMolinaR37 No me importo en absoluto. Me alegro de haber podido entender y responder.

[@jimmypavone3231]

Awesome. I started having odd feeding issues. Sure enough it was pretty dirty in the mags. The 13 rounds was confusing me too! Smooth as butter again!

[@UBRArsenal]

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@juliozotero100]

Bruh! You video saved me lot of frustration. Thank you for taking the time to make this vid

[@UBRArsenal]

Hey man, I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day. 🤜🏼🤛🏼

[@AndrewD50297045]

PS Swap the extended plate from the 13 round mag onto the 15 round hellcat pro mag. Whammo 17 rounds for your hellcat pro

[@UBRArsenal]

Hi Andrew, that's great. 17 rounds in such a small pistol is amazing. Thanks for watching and leaving a comment. Have a great day.

[@roberthall2539]

Very nice and right to the point, Thank you...

[@UBRArsenal]

I'm happy you liked the video. Thanks for leaving a great comment and I hope you subscribed. :)

[@joewilson4561]

How do you like your hellcat? Just bought one a couple weeks ago

[@revv45acp71]

Very helpful! Thanks!

[@UBRArsenal]

Hi Revv, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 🤜🤛

[@csarebel8657]

Damn…. thank you.

[@UBRArsenal]

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@willwaag]

Apparently, Springfield Armory has developed a new 10 round magazine for the Hellcat (since release of the RDP?). The "new" 10 round magazines do not have a "hole" through the baseplate - with which to disengage the baseplate... I'm trying to get information from Springfield on how to remove the "new"-style baseplate - -without damaging the magazine...

[@manyfeather2knives423]

Great vid. Just subed

[@UBRArsenal]

I’m so glad you liked the video. Thanks for watching, leaving a comment and especially for subbing. It helps the channel out a lot. Have a great day.

[@Seth_Murphy_00]

Great how-to!!

[@UBRArsenal]

Hi Seth, I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. 😁🤜🏼🤛🏼

[@AlexanderMcQueenWallet]

Thank you sir 🤝

[@UBRArsenal]

Hi, you're welcome. I'm glad the video helped you out. Thanks for watching and leaving a comment. Have a good day.

[@stephendenlinger3514]

Great video. You made short work out a crappy little task.

[@UBRArsenal]

Hi Stephen, I'm glad the video helped out. Thanks for watching and leaving a nice comment. Have a great day.

[@stephendenlinger3514]

@@UBRArsenal- - My pleasure. Keep up the good work. It's guys like you that make KZbin such an incredible resource.

[@UBRArsenal]

@@stephendenlinger3514 These types of comments are reasons why I post videos. Thanks again for the kind words.

[@ryanlott6577]

Thanks bud.

[@UBRArsenal]

Hey Ryan, I'm glad you liked the video. Thanks for watching and for leaving a nice comment. Have a great day.

[@goulashchannel7551]

What about the 15 round

[@UBRArsenal]

Hi Goulash, GunPrime sent this pistol out for review and they didn't provide the 15-round mag. Sorry about that.

[@user-gt9no6ph2d]

Do you know how to take apart the 15 round mag. I have been trying the same methods but no luck.

[@UBRArsenal]

Hi there, I don't have the 15-round mag to make a video. If I ever get my hands on one I'll make sure to make a video on its disassembly.

[@romanovskie3381]

Thank you for this!! I was at the range today shooting and the magazine randomly exploded it was terrifying I thought the gun exploded at first! I was sure something catastrophic happened it zinged my hand really good but I’m ok. I just reassembled the magazine somehow the assembly came loose when shooting hope it doesn’t happen again.

[@UBRArsenal]

Hi Romanovskie, I'm glad to hear the video helped out. What happened sounds crazy. You might want to reach out to Springfield to let them know what happened. They would probably want to send you a new mag and ask for you to send the old one back to them. That way they can find out what happened so it doesn't happen to more people. Let me know how you make out if you do call them. Thanks so much for watching and leaving a comment. Have a great day and stay safe.

[@TacDyne]

This can happen with plastic floors, especially when the area holding it to the magazine is only 1mm thick. There are people manufacturing aluminum floors now, so it may be something to look into.

[@JesusRM416]

are the 15 rd hellcat mags compatible with both hellcats?

[@UBRArsenal]

I’m not sure because I haven’t had the chance to try a hellcat pro. Sorry bro.

[@elsabio7279]

Is the plate necessary?

[@UBRArsenal]

I would think the plate gives the spring support and stability.

[@puffybodie5282]

I would say it is, because then it is possible that this can happen as with smaller mag kzbin.info/www/bejne/inqWmn2anK-tqNk

[@vernonbruce3722]

your audio is very low on your videos. I have to turn my speakers to max volume to be able to hear you, but barely.

[@UBRArsenal]

I know my videos were low at one point. I’ve got a new mic and my new videos are louder. Thanks for the constructive criticism. Have a great day!!

[@YouTubeHandlesAreMoronic]

1:40 Gaaa!!! Why does your thumb bend like THAT?!?