How to Repaste and Clean Dell Inspiron 15-7559 Laptop - Step-by-Step Guide

[@ThZuao]

Hey there. Thank you for telling us how thick the thermal pads should be. Been searching far and wide for the darn things.

[@uFixTek]

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P you can always get .5mm pad sheet and just stack them to get to the desire height, thermal pads can be stacked. Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

[@p0stman_pechkin]

Thanks man, a useful tutorial, and for the high quality of 2160p❤

[@uFixTek]

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P i do try to keep and invest for better equipment for my recording, thanks yo your help with subs and likes, not i have upgraded to 60fps recording 4K.🫠 Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

[@IR0Navt]

Thanks for the tutorial, it helped. I have 2 notes though: 1. If the laptop has additional SSD in SSD socket, one should consider removing it too before removing motherboard or else it won't go 2. Before removing wifi module the white cord was up and the black was down 5:00. After bringing back they switched places 20:55. Is it important?

[@uFixTek]

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or do both! Regarding your question, if you have a flexor cable connected to your SSD, you must remove it before proceeding. As for the WiFi cables, there is no difference in color, so you can swap them without any issues. They are both simple wire antennas, with one being black and the other white. The black one is typically used for Bluetooth, while the white one is for WiFi. BUT they both do the same exact work as both are simple antenna cable. Should you have any further questions or requests in the future, please don't hesitate to ask me.

[@IR0Navt]

@@uFixTek Thank you very much for your reply!

[@uFixTek]

It's my pleasure my friend.🍻

[@brunodagerbezerra1953]

Awesome tutorial, thanks!

[@uFixTek]

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any further questions or requests in the future, please don't hesitate to ask me.

[@Smrigankiitk]

Correction : the white and black cables at the WLAN CARD during the re assembly is interchanged ! Please correct Thank you for the awesome tutorial I could clean my laptop because of this

[@Smrigankiitk]

If possible please provide a solution for broken hinge , it’s a repetitive problem with this

[@uFixTek]

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, the wifi cable colors don't make any difference if you change the places both are the same. regarding hinge repair i have few videos that can help you understand the work around. kzbin.info/www/bejne/jHKYaYqMaNN1aZo kzbin.info/www/bejne/qJu1kKqMg8xnrZY kzbin.info/www/bejne/i6u9aKqJpMujd6M Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻

[@Menegane]

I have the same laptop what is the best paste for this laptop

[@uFixTek]

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, i recommend you this top of the line pastes: thermal grizzly kryonaut: amzn.to/3p8oDQJ Noctua NT-H1: amzn.to/3p1YjI7 ARCTIC MX-4: amzn.to/3CD0XqA

[@hemantsangle9204]

Hi My laptop is still heating after applying the thermal paste Do you happen to have any idea about how this can happen

[@uFixTek]

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, what are the temps of the laptop under load and when is idle, also what brand of the paste you used?

[@hemantsangle9204]

@@uFixTek the temperature keeps jumping up and down no matter if its under load or idle and after some time the temp will got 100c for fraction of second for one core and rest will follow the same. The usual range of temp is between 52 to 100 Ps i forgot the brand of the thermal paste

[@uFixTek]

The brand of the thermal paste is extremely crucial; it must be original and of good quality. If you use something from a shady brand, well, that's where your issue lies!

[@hemantsangle9204]

@@uFixTek Thank you for the reply. Oh okay, I will try to reapply paste again, do yo know which paste brand is good in india, as i have no idea about

[@uFixTek]

www.amazon.in/ARCTIC-MX-4-2019-Compound-Performance/dp/B07L9BDY3T/ref=sr_1_1?crid=8M1K2EU7U98P&keywords=arctic+mx4&qid=1690347323&sprefix=artic+mx%2Caps%2C249&sr=8-1

[@Dhiya325]

I already bought new thermal paste to repaste my inspiron 15-7559 but holy that so complicated. You gotta tear all components just to repaste 🤦

[@uFixTek]

Unfortunately, for this model, you do need to remove the entire board. On some other models, or most models, it's very simple, but not on this one. It's like taking your car in for a simple oil change, and the mechanic tells you they will need to remove the engine to do so, all because of how it was designed.

[@HaploPrime]

This is such a terrible design. You should not have to disassemble every part in the laptop just to replace the thermal paste

[@uFixTek]

I agree with you, but this is done by design as the brands don't like people opening and touching the inside of the laptops, so they make it harder every time. cheers🍻