Dormer Construction basics The wall Frames

[@thurlravenscroft2572]

Great work! I love that enclosure around your entire project!

[@djmdog8754]

I work in architecture, but I am also fairly decent hobby woodworker. I always find your videos really informative and interesting. Keep up the excellent work

[@englishrifleman6556]

Fantastic as normal Robin. Really hope there is a part 2 to these Dormers, love it so far.......

[@ukconstruction]

Yes mate there are a couple more to follow

[@yorwerthedwards1045]

That is black magic you are a awesome carpenter mate 🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@philiphurdwell3443]

Always a pleasure to watch

[@samposton9101]

Lovely work as always.. You make everything look easy!!

[@elliejake11]

Really like the over lap on the header that picks the side up to, as always lovely work mate true craftsman 👍💪🏼

[@denty32]

Hi Robin, when we do our dormers we make everything up flat on the floor, so much quicker building the front including the gable in one panel and make the cheeks up including the osb/plywood.

[@ukconstruction]

That is a technique that also adopt where we can, its super simple and quick!! nice one mate

[@AntGeezer]

Work smarter, not harder. Great ethos 👍

[@davidmcivor2761]

Lovely work Robin, I so enjoy watching your videos, it’s your thoroughness & attention to the smallest detail means you excel from doing a just a good job to doing the very best job money can buy, obviously this comes from your years in the business & the shoddy corner cuttings you’ve witnessed, fair play to you mate. Quick question, I don’t understand why dormas are always set back from the external wall, I imagine walking into that attic space & walking into a dorma where a single piece of glass is sitting right on top the exterior wall.

[@MrJimjam2011]

What's your preference for insulating the dormer cheeks. They always look to be a bit of a weak spot insulation wise?

[@chrisjay7268]

Great video again ,well done .

[@dabruscar]

Great job mate. At the end it almost looked like a practical interview for ikea ha ha.

[@T.E.P..]

Can't say enough how wonderful this channel is and the intro .... The work is always stellar and each video is full of your great tips and the worksite is clean and cinematic. Hope you guys are having a glorious weekend!!

[@MrGarry128]

Hi Robin, Thanks for the wonderful videos. I have learnt a lot through your videos. I have one question please. How much allowance do I need to provide for lead height above window cill? Thanks

[@silverfox8801]

So clean it looks like a tv studio!?

[@ukconstruction]

Thats the way I like it!!!

[@brianl5159]

Another great video keep it up

[@brianl5159]

@@stantheman7467 hi Stan sin35÷tan45=second function tan =29.8° miter cos35÷tan45= second function tan=39.32 edge bevel

[@brianl5159]

Hi Stan hip edge bevel formula cos hip pitch angle ÷ tan plan angle = second function tan = . if you set the circular saw to the plan angle and cut along the plumb cut line that will give you the required bevel squared our backed

[@brianl5159]

@@stantheman7467 Stan one trig formula I use a lot to find the hip pitch angle if I only have the main pitch of the roof is tan(40)×sin(45)=second function tan=30.68° that formula is true for equal and unequal pitches the 45° is the plan angle . have a good day

[@michaelplays2449]

Great video,thanks

[@messenger8279]

You're getting the hang of it.

[@RI-uv3lm]

The video could have been more instructive. But always a joy to watch whatever you do 👍

[@akeembailey5967]

Amazing

[@ukconstruction]

Thank you! Cheers!

[@Morning_Rays]

Hi Robin, I'm constructing dormer cheeks by looking at your videos. I noticed that you put a little piece of vertical wood Next to the left first cheek stud @2:39 into your video. is that a permanent piece of wood that you leave there or is it just a temporary piece of wood to help you align second stud vertically? Thank you

[@ukconstruction]

I leave that there to space of the stud to carry the internal plasterboard corner and also fix the return window stud too

[@Morning_Rays]

Thank you. I have piteched my own roof by learning from your channel and now working on dormers. (I hope my house will stand because the real work is in accurate measurments) I also found that your tip of using timber instead of tape is easier.

[@reesjones1582]

Super 👍

[@briangc1972]

In what universe do they erect a temporary cover over the entire building for construction? Is that standard practice? Is that a code requirement? How much does that add to the cost of building a house?

[@ukconstruction]

It's a big thing here in the UK to temporary cover the building

[@briangc1972]

@@ukconstruction I see the advantages, it should be a requirement to prevent water damage. What is a typical cost for the rental?

[@ukconstruction]

This was about 10k

[@liammcnulty7112]

Not enough instructions on dormer forming, headpieces overhanging, studding of sides, was all on fast forward😊

[@FrancisoDoncona]

You built a house indoors?

[@georgeomalley6066]

Great Detailed description 👍

[@ukconstruction]

Glad it was helpful!

[@scottthomas5819]

Yesss

[@selvinjacob3595]

Im interested in seeing how u build a stairway

[@ukconstruction]

Look at the staircase videos in the channel

[@dennishughes3250]

Have to agree with Liam McNutty. Unusually short on detail. Still the best chippie channel though....

[@MrSmith_]

Excellent video although I can't help but think you sound just like Steve Mould (another KZbin content creator)

[@JoshuaSHogg]

Exquisite…

[@Order-in-Chaos]

Screws? Really? I mean bad enough they use fake 16d nails which are .131 nails 3-1/4" long, now screws are accepted? We only use 16d and true 16d .161 3-1/2" nails which only a small number of nailers can shoot oddly.

[@ukconstruction]

It's all about the types of screw, I use a construction screw that will perform as well as any nail, onto the nail thickness and length issue that you mention, all nails should be the size and type suitable to do the task, we always try to use a heavy duty galvanised nail in our nailers (gas and 18v) for structural timberwork these have been tested thoroughly by the likes of Paslode in years of development and I trust them!! Have a great weekend mate

[@Order-in-Chaos]

@@ukconstruction Not a fan of screws for framing and never will be. Also from my experience I feel that galvanized nails are extremely dangerous because of their slickness. Although it seems that I'm heckling you I honestly am not. Do a test yourself. Shoot a regular framing nail anchoring two large pieces of lumber then hammer them apart. Next shoot a galvanized nail the same way, you'll find that with almost no effort you're able to break apart the lumber that was anchored using the galvanized nails. It's scary to think how easy it would be to lift off a roof during extremely windy conditions when using galvanized nails. Just my opinion. Cheers.

[@johnmorrissey1675]

👍🇮🇪☘️👏🤟

[@ricardofernandez3551]

He talks to much, (nearly 50% of the video) and then shows the building process on a time laps to fast to appreciate the work.

[@ukconstruction]

Try my next video, where I hardly talk and it is over 40 minutes!!

[@stephent6953]

🎉 P-R-O-M-O-S-M.

[@Brandon-no3vc]

You gotta be kidding me

[@ukconstruction]

Why

[@Brandon-no3vc]

@@ukconstruction horrible video

[@Thomas-pq2qz]

Too clevet by far.guab