Ultimate DIY Budget 3" lift kit for your Toyota!

[@StewsReplay]

I kept hearing "foreigner" its like WTF is a foreigner? OHHHHH 4 RUNNER

[@danduran536]

Did you put a spacer on the driver side or did you raise the driver side clip up 1 notch? I have the same vehicle with the same shocks only but my driver side is sitting 1-1/2” lower. What did you do to make it level?

[@macdaddy1617]

I did a 6 inch pro comp lift on my 2012 FJ. waste of money and have to have custom skid plates made and can not find a fabricator. Really did not get any clearance advantage due to the front cross meter. The only thing that the lift kit was good for if o wanted to put 35s or better but then you have the cost of re-gearing. Stick with the 2.5 lift ,wish I did!

[@kc8998]

Do you have a video or picture of your lift..??

[@macdaddy1617]

@@kc8998 go to “RMS off road” in Long Island NY website. He did mine and has a ton of pics on there. Eventually I’ll regear and put 35s on. I’m running 33s now. Oh yea you have to have rims that offset too with that lift or run spacers but spacers are not good for off roading. Another expense. Stick with the 2.5-3 inch lifts and run 33s unless you seriously want to do rock crawling. My 2 cents. 🤷🏻

[@GavinJLang]

Dont forget your cutoff wheel and sledgehammer for removing the old struts that are rusted in place. lol

[@lonesomecricket7721]

Just curious what size tires were on the FJ in this video?

[@trevormeek3223]

Did you add a trim packer to the drivers side? Thank you!

[@timothyruiz2465]

Yeeeeahh ... if you don't have that spring compressor tower dealy, you can pack it up and ship it back! I tried with three different types of spring compression tools, broke one (didn't die) .. and NOBODY (shops) wanted to mess with compressing the spring onto the strut for me ...

[@Jonesy11B]

Kick ass bro 🇺🇸

[@yotamafia]

Always and then some!

[@2rzturbo962]

Can i just throw my standard tools into my neighbor's pool? I dont have a retention pond out back.

[@dad3562]

Thumbs up great job on your video! How does the suspension feel off road? Does it feel smooth or is it harsh ?

[@edgonzalez73]

Are you running a spare tire and does that affect the overall height towards the rear with regards to choosing hard over medium for the correct level since you have hard springs up front for the bumber I thought to ask...

[@yotamafia]

This FJ does have a spare tire, a spare tire only weighs around 60-80 lbs which doesn't justify the need for HD coils.

[@elizabethdecker9905]

How did you reconnect the ABS sensor bracket back to the new upper control arms? I noticed there wasn't a spot for it

[@l8nightvibes]

hey, i just got my 3 inch procomp suspension lift kit installed but dont like the leveling. if i get after market uca, will i be able to throw on a 2inch or 2.5 inch spacer lift on the front with my lift??

[@naps__4107]

Great vid... You the man thank you...

[@scootypuffjr.]

Bil-stine. Say it with me.

[@yotamafia]

Lol I know I know 🤣

[@fritty9927]

Didn’t notice a diff drop install. Necessary?

[@yotamafia]

We personally don't recommend a diff drop unless you go over 2.5" of lift.

[@051garage]

Is that a stock top hat ?

[@Kana0211]

Torque specs for everything?

[@neilrambaldi]

Hi, what size are the tires used on this vehicle after the lift?

[@yotamafia]

33's

[@suhimniko]

How do those rear mediums feel without any gear back there? Looking to get the same ones for my rear but I don’t always carry gear back there and hoping it’s not to stiff for daily driving without any gear.

[@sirhuggles]

Niko Estella I’ve been wondering about this too. I think ima just get mediums no matter.

[@erhardwoodsflooring4662]

Can This lift kit fit in a 2008 FJ ??? Thx

[@yotamafia]

sure can!

[@james_the_darklord]

Did those bilsteins shocks last?

[@tannyrocha9344]

I've had them for 2 years and often run long ways on sand and gone to Baja 3 or 4 times as well and still good

[@yotamafia]

Bilstein shocks have a great reputation for lasting well over 100k miles!

[@alexanderzec4502]

When do we get to see the rear lift?

[@alexanderzec4502]

Will buy the kit if rear vid available.

[@rdstar20031]

Whats the kit part number ?!!

[@davvidhzara]

Are the new upper control arms necessary for this lift? Or is it just best to do them when you are doing all that anyways? Thanks in advance

[@Outwit132]

It helps if you look at shape of control arms changes positioning, but also you already have it already taken apart...

[@chriscabel9473]

Camera wobbly... makes viewers dizzy

[@yotamafia]

Will make it better for the next time!

[@Ioading...10]

What scares me is they using that cheap China MasterPro Top Hat for our Shocks! I work at O'Reilly and that's our house China cheap brand lmao

[@yotamafia]

Hello. We haven't had any issues with the method we use building our lift kits. 3 years strong and counting!

[@tonycerruto5157]

😂

[@tonycerruto5157]

“Carolina Skwaat” Great video bro! Was good to see you last week! Keep up the great work!

[@blacktooth6242]

No safety glasses 🙄😃🤪🤭😀

[@playfanryan4566]

Bahahahahah