Ultimate DIY Tool Storage For Small Garage Workshops - Workshop Organizer

Getting my workshop organized!
I designed and built this tool storage unit to maximize tool storage within the allocated space.
Making the most of a small workshop means being organized. Everything in its place with this DIY tool storage unit.
GET PLANS!!
thewoodworkersplans.com/produ...
To support my channel visit one of our merch stores:
USA - teespring.com/stores/woodshop...
EU - teespring.com/stores/woodshop...
Or follow my projects on social media:
Facebook: / woodworkjunkiesite
Instagram: / woodworkjunkie
Check Out My Gear (Affiliate):
USA - www.amazon.com/shop/woodshopj...
UK - www.amazon.co.uk/shop/woodsho...
Other videos you might enjoy:
Restoring a Wadkin Bursgreen AGS 10:
• Table Saw Restoration ...
Restoring woodworking history:
• Restoring Woodworking ...
Some product links may be affiliate links which means that I may earn a commission if you click on the link and/or make a purchase. The price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support.
Disclaimer.
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct.
Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.

[@RustyCas999]

The fact that so many are suggesting “tweaks” to your design shows you are a massive success - your approach makes people *think* which means you inspire people which is what YT should do.

[@thoskins202]

My favorite part of your videos is how you explain your thinking process, and go over why you made the decisions that you did.

[@jirigrym1533]

I am very thankful for the kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO that has been a tremendous help to me in building a perfect outdoor shed. I have been facing many challenges and difficulties for a long time, but this plan has guided me to correct the mistakes during the process. I am impressed by the projects and I express my gratitude to the creator of this collection of plans.

[@bryanhughes3751]

Nice spam. Did you edit it in after getting a bunch of thumbs up?

[@Tavpanda]

This was more satisfying than a fridge restock video

[@skerminkel9971]

I have to admit that half way through I thought this is proper KZbin project - looks impressive, but no one will actually build something like this for own use only. I was wrong. It looks really functional and makes a lot of sense for a small work room. Great editing as well. No minutes and minutes of table saw cutting and glueing up layers of planks. Just the essence of the project. Well done!

[@compunurse]

That would also be a great concept to use for a small kitchen that doesn’t have a lot of cabinets. I could see it used for spices, utensils, measuring cups and spoons, etc. etc. etc..

[@LittleShadowWoodcraft]

The big "aha" moment for me was when I saw how you incorporated the bearings WITH the slots you cut.... Genius. Thanks for the build video!

[@RareRiddemz]

Many of the other creators call their projects "ultimate" but they look and function like everyone else's. But this, this project truly is deserving of the word ultimate! Subscribed!

[@MrPatdeeee]

Our "guy" never let's us down. For he's a "Genius" of Genius's! Thank you kind Sir. We'll wait for another Gem; that comes from you. And we KNOW it will be an awesome great Gem!❤

[@houstonsam6163]

You must have achieved the highest scores in history for "spatial reasoning" on standardized tests.

[@dclaghorn2]

I’d buy these plans in an instant! This is a great solution for my single-car garage shop!

[@kentrichardson9070]

An original design,well thought out. Now go make some bearing holders ,everyone is going to want some.cheers.🇨🇦

[@ReneLopez-vb6gb]

Excellent!, the way you explain how you develop this project, it is not a common way but it is very creative, it is very fun and satisfying to work like this, your video is inspiring to do intelligent projects, thank you very much.

[@bobdove6068]

One of the comments below was to leave off the doors to get quicker access to the tools. Maybe add more tools to the outside of the doors for even more storage. 🤪 I like it as it is personally. Well done.

[@Moocow8]

im working out of a single car garage and it is such an absolute mess, i sit down look around and just stress out, videos like this make me so hopeful i can figure out a way to make it work

[@markgeezey1809]

At first I thought, nah prefer to use a normal cleats with sone nice tool holders as a few nice designs on You Tube. (Glimpse in Side). Especially considering us wood workers can be a little vain and like to show the tools we have? 😂😂But after seeing how this turned out, would definitely buy the plans if you have them in metric. Fantastic use of space and looks great on the wall. What I also like about it is should you ever rearrange or move, then it’s a simple case of just lifting the whole box off the wall with all your tools inside and all in one go. Genius albeit heavy. But if done right french cleats can take huge amounts of weight so no problems there! Excellent 👍

[@Zogg1281]

I just remembered another great addition to a tool storage ...... Lavels where you might have a screw or nail all by its self. In the past I've gone down the route of painting the board and marking round the tool, as well as tags on string hanging from the nails, but at the end of the day it boils down to one thing....... remembered what the missing item is!! I've done jobs that end up with tools in multiple locations as well as being in temporary tool boxes...... I've also had a wife "borrow" a tool and it just vanishes. With some sort of label system you will know exactly what is missing from your board straight away, which means looking for it is a LOT easier! I hope this helps someone and, as always, great job on both the build and the instructions on making and assembly 😊👍👍👍👍

[@zaenbaker1427]

the only thing I would add, is a bit of cord or chain, to support the bottom door when open, so you can use it as a surface when open so you can use both hands when organizing or retrieving tools

You should do the same method sliding windows do to have a way to put the doors in place. The upper rail is deeper and the door has room on the top side to slide up the door and extract it from the lower rail.

[@kristjanjonsson7723]

I like you and your projects 😊

[@davidelang]

608 bearings are cheap and widely available in the US as they are the worldwide standard for inline skates

[@ryanbartlett672]

Love sliding vertical drawers. I have been envisioning similar but 8 ft tall :-)

[@crissignori7482]

beautiful work ! very, very nicely done .... most inspirational

[@I_Can_Do_That]

Holy cow that’s awesome!

[@extraNaz]

❤❤❤🎉its beautiful Im going to make a couple of them..thanks

[@prhannator2874]

I have an unfortunately shallow garage I want to use for both mechanical and wood work. It poses 2 issues. First one is there's not a pile of room when the car is in to be worked on so the usual tool box in front of the hood is a bit of a problem. The second is dual purpose shops get dust on everything exposed. Your project just solved both! Amazing. Great video.

[@danutplesu3352]

This didn't make much sense until the end when it took all the tools and more, Wow, impressive build.

[@brucemitchell5637]

Always a good day when I get a woodshop junkies notification!

[@RiganoBuilding]

That is not amazing, not awesome, not good job… but that’s simply PERFECT. No much no less… just PERFECT! I love it Hello from Sicily

[@livingstonesagonda6465]

I am not handy by any stretch of the imagination but you can see when something is well thought out. 👏This is awesome

[@andrewplumb6544]

What a great design. At the end of the day when you clear up everything will have an obvious home. Soon spot those tools still astray. I will have a go at this project. Zoned for electrickery, plumbing, woodworking. chanicing

[@vargr]

Wonderful idea, going to make one or three for my hand tools and trash the 15 toolboxes filling the storage wall of my tiny shop.

[@michaelhedges782]

Well Done!

[@stephendonathan6782]

Great cabinet! I've been wanting to build a tool cabinet for my wood shop but just haven't got around to it. I think another great idea for your cabinet would be to use your bottom door as a table. You could put a small chain on each end. I know you wouldn't be able to put heavy stuff on it but it could hold your tools as you select them. Take care and GOD BLESS 🙏!

[@EngineerMikeF]

Multi layer respects shop volume (most shop storage concepts, like much thinking generally, are 1 layer deep). Tiny shops don't have luxurious wall space. Well thought out. Plans & parts links.

[@andrewpickering7248]

I think it's a very good idea and it does everything you need it to

[@simonr6793]

Jean, you have to make a video for the tools and the holders otherwise this video gives us the impression that it is not complete, also it will give people different ideas as to how to make the different tool holders and possibly some designs that we may not have thought about!!! As always buddy 💯% 👍 🇬🇧.

[@sarelwagner]

Candlewax, rub some candlewax on both the ally strip, and inside them grooves. How? Cut the candlestick to just fit in the slot, twist sideways nd slide. Cheap and easy. Works on drawers too 👍🏻

[@kallibrand4106]

This is great way to store and care for one's tools . Everything stored , cared for and it takes up only a tiny space and no floor space is used up by a trolley . Wel done !!! And very motivating .

[@manson5150]

You should install a retaining chain from the frame to the bottom door so that those hinges aren’t in a lateral strain constantly, other than that it’s a solid build!

[@dougveganparadisebuilder5808]

How the bottom door is hanging down in that angle would be my only point of critique. I would make it so it would hang down completely vertical, more ergonomic. But overall a very ingenious build by Sean.

[@robt2151]

Valid comment about the strain on the hinges. Also, adding a couple of chains to hold the lower door horizontal would make it into a shelf that would be useful when sorting tools or using more than you can hold in one hand.

[@manson5150]

@@robt2151 that’s what I was saying more or less.

[@billybike57]

Maybe building some drop leaf hinges to the doors adding gives you a workplace surface to use

[@melissae1034]

This would be great for my sewing room. I spend a fair amount of time digging around for small tools.

[@comsigninc]

Very unique solution to your small shop.

[@garylacey8543]

Don't need to say much. Just top Job, give's a idea. Thank You

[@iamsuemitraa]

I saw a clip of this storage unit on Pinterest. I fell in love with it! Now to find the full video, I'm looking forward to building this.

[@christianwithers7335]

One of the best ideas, execution of idea and originality for a workshop on KZbin 😁 well done

[@greggorangio8047]

I like the new tool storage but wonder if moving the panels will 'get old' in time. Absolutely want to see a video on making the tool holders. That was one of my favorites parts of your french cleat wall. Had you considered having the bottom door open to horizontally flat so that it can be used as a "staging table" when adding/removing tools? Are you giving up on your french cleat system? So glad you are back on creative workshop projects!

[@thisisyourcaptin]

I worry about that. BUT, if you are limit on space, like I am, This make a load of sense keeping things where you can find them, vers hunt for them. As of now I have a similar working area and all the tools he hung are my go to and are stored all over. This would keep them right where I can get them quick AND have a home for them in the future to GET them quick. It definitely has a home in many peoples lives. Not all, but many.

[@Lantern1100]

This is one very nice tool cabinet. I need to incorporate this into my work shed. Thank you.

[@elviscoso01]

Awesome project!

[@plankie1965]

That's the best storasge unit i've seen so far. Well done. So much into such a small space. Necessity breeds invention.

[@danielgrabske3545]

Awsome idea when you are limited on door swing

[@Julz0072]

To add lubrication to the aluminium plate you can use candle wax or 'paraffine'

[@IamActive83]

Wow, amazing. Great project and very inspiring. Add your logo to the front door.

[@MartinPaulsen87]

How this has 56k views and not 56k likes is beyond me. What an awesome build! Thank you for sharing.

[@Jizzlewobbwtfcus]

This was frikkin' AWESOME! I cannot fathom how much knowledge you have accumulated over the years to make this project's process look so casual but you have my utmost respect from the UK! Every aspect of this construction looked perfect. All I need now is a garage lol. Got a new sub : ]

[@jere7429]

That's a great storage solution liked the addition of all the 3d printed parts for storage

[@bamsebrumbamsebrumen5403]

Nice idead. I hope you added some holes (opening) in those slots so dust and garabge can fall out. 🙂

[@ClareCC0902]

Just came across your channel. This is an excellent design and it's a bonus that you are South African!

[@willemvanarkel]

I thank you so much for this wonderful idea. I made a similar one right after I saw your video. I put some pictures on my Facebook page.

[@TheMaxwellee]

Clever dude. :)

[@rodnewman6645]

Awesome cabinet!! definitely want plans.

[@grfxninja]

daaamn… this is brilliant 😯

[@jfrogz5772]

Awesome project and vid, brother! Complete yet succinct explanations. If you haven’t put the plans in the description yet please do!

[@douglasadrian138]

Basically a toolbox on the wall. Efficient, effective and it looks great. I think plans - in a general format with out the specifics of where tools go - would server you and your base well. Looking forward to future videos!

[@rpaasse6453]

Friggin brilliant

[@tom2move]

Wow, I think that this is one of the most useful videos that you have produced. I'm amazed at how much stuff you got in there. Please, more of the same!

[@SKTWoodDesign]

This is smart thinking - well done - This is a project to do.

[@j316finewoodworking6]

This is genius level.

[@MarshallLoveday]

EXCELLENT! Amazing space utilization!

[@Dwitt-fh8gq]

That was beautiful. I had my doubts but you redeemed yourself 😂

[@glauciogv5225]

Great job ! 👏👏

[@tbabajan]

Love it! Glad to see you makin vids again!

[@Jamessansome]

Cricky that is some effort to save some space! I need to do something like this however I wouldnt have the patience for the individual sliding panels. I think I would just have a single rear panel and 4 narrow vertical hinged leaves that can have tools on both sides. Great idea and its got me thinking!

[@glueupsscrewups]

Baie oulik. So baie spasie, sjoe.

[@nastyevilbunny]

This might be my favorite kind of video. Please do a follow up with the tool holders. 😊

[@66meikou]

Just a suggestion to what you did. I would have put the aluminium guides on the back for aesthetic reasons as I'm an architect. The other suggestion would be to make the upper guide slot deeper so you can remove the panels. You may well have done that though so if you did, good thinking.

[@christopherrutt7822]

Ditto what's already been said about your ingenuity and thoughtful filming/editing. Just bought the plans. Thanks! And keep up the great work

[@waynesinden]

Briljant. Now I have to build one too.

[@shed-guy]

Excellent mate

[@davidpearson8232]

Brilliant! Would like to have some plans, please. Also have a single garage workshop. Your planters video gave a sight of where you are. I am from CT originally, 3 anchor bay/Green Point. Will be back for a visit in January 24.

[@ruinunes8251]

That is a very neat project. For some time I'm planning something like that for my garage but, frame wise, much easier and on larger scale. I already have some sliding shelves in my garage and for lubrication, I used an ancient method that still in use today in some industries, which is wax. I would use a metal strip under the bearings because soon, with the weight of the tools, you will have a groove where the bearings run.

[@sergioferreirs69]

I like the idea of the metal strip under the bearings. I also always use wax to lubricate on wood but I've found an even better option.... Butchers block wax! It's a combination of Bees wax and Mineral oil which goes on easy, especially in a narrow groove like that.

[@triplex86]

That is such a clever design for effective use of available space. I do so enjoy watching your videos - you are always so creative.

[@FintaruS]

the plans and a tool holders video would be great :)

[@keggyification]

Wow, Brilliant, Amazing, Stupendous, First Class. I'd love to get some plans please, this is just what I'm looking for.

[@Grevlain]

Wow - that's great. It makes my OCD so very happy. Great vids!!

[@plasmaxer]

Awesome thinking outside the box.

[@mandythorpe7188]

Hell yes, I would really appreciate plans for this.

[@spinyuk]

Thats just awesome! the swing out door for the extra space is a great idea too

[@joncroley2744]

Yes tool holder video please!

[@bluepeakwoodworks]

Too many videos are titled "ultimate" when they're not really but your design is quite clever. You solved some of the potential weak points such as the rollers brilliantly. I may not use your exact design but it does sparks some ideas for my small shop. Thanks for the inspriation!

[@g.m.forsythe9626]

Pure GENIUS!!

[@braddeboer9317]

I would love a set of plans. Looks great!

[@FranksDIY]

Nice job. Everyone can use something like this

[@alainfaubert3943]

I really like your tool storage unit. Love to get the plans. Great video👍

[@hsjawanda]

A very smart build! 👏🏼👏🏼👏🏼

[@mdn642]

Brilliant!! Plans would be handy!!

[@mr_torx]

Good job, Jean!

[@thewoodworkinglocksmith7853]

Awesome, gave me some great ideas. I Love it, your Ingenuity and Skills.

[@paulgendron8416]

Aside from the excellent content and project idea, this has been by far the best made video I have ever seen on KZbin. The elimination of all the duplicate cutting, drilling, assembly and other useless content made this video the most interesting and easy to follow video I have seen. Please keep up the great work. BTW, I just subscribed with all notifications.

[@aaronm5535]

Genius. +1 for tool holder video 😊