Ultimate Welding Cart with Folding Table Extension

I make this welding cart to fit my Mastroweld MIG-250MI Multi purpose welder. I wanted also a small table where I can weld inside and outdoors. Due to my limited space, I wanted to combine them. It has adjustable feet on the table to allow for uneven ground and locking pins in the folding pieces for extra safety. All the ends of the tubing are closed up and ground down. It features a torch holder, cable hooks and a place for accessories and grinders. The table surface is sanded clean and covered with anti-splatter spray for easier cleanup. I'm not a welder by any means but i think it won't fall apart and if I always can weld it back together.
Thank you very much for watching!
Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!
If you like my videos support me on Patreon: / ollaris
Or tip me: www.paypal.me/...
Visit my Website for more details: www.ollaris.tv
Subscribe for more videos: / ollaris
Twitter: / ollari_s
Instagram: / ollari.s
Music by Epidemic Sound (www.epidemicsou...)

[@michaelarenal1578]

That was a sweet welding table & great video. No talking...no crappy techno music...just the natural sound of welding fabrication. Thanks!

[@Ollaris]

Thank you very much! Glad you like it!

[@nkaltso]

Thanks, I built a cart that was a variation of your design and it worked great

[@Ollaris]

Awesome!

[@nkaltso]

Here are pics. I moved the feet out for stability and added a second table. instagram.com/p/CEnP2w9DmuL25CeQrFDJ1PiG4CRJ-0LDf3QANw0/?igshid=w933wxaihc8k

[@PurveyorOfCuriosities]

Love this video! No stupid talking, no stupid music, no stupid opening, no stupid break taken to play with your pet or small talk passers by. Just good informative content. I appreciate this format so much. Side note: You should sell plans for that welding cart.

[@Ollaris]

Thanks! I take that in consideration!

[@paddlepower888]

Beautiful. Thanks. Great folding table. Love the torch holder. One day, I'll grow up and attach a folding table to my cart.

[@billy19461]

GREAT JOB!!!! From a retired welder.

[@Ollaris]

Thank you very much! That is really nice to hear from a pro!

[@MnktoDave]

I like your design for that fold down wing. It's flat, quick to set up and take down, has adjustable feet, and takes little to no storage space. All the best features for a good quality, portable welding table. Nice! I built my table with slide out wings for both sides, but they don't store with the table, and they take a little more room to store.

[@Ollaris]

Thank you very much! It’s a bit heavier than i would like to roll around when working outdoors. I might downgrade to a smaller tank though.

[@MnktoDave]

@@Ollaris Yes, I completely understand what you say about the weight! My main table is 39" X 48" (w/o ext) and very heavy to move around, even with good castors. Each extension gives me another 3' on both sides (totaling 10' in overall length for large jobs) but adds a lot more weight. That was why I decided to make them slide out instead of folding, but I really do like the compact folding design of yours. Since it's such a beast to push around, I also made a 2' X 3' top (1/4" thick) that quickly fastens to my Harbor Freight 1,000 lb lift table, and that's often what I use for smaller jobs. It works great, moves around easily, I can set the table at any height I want, and when I'm done I just remove the top and store it out of the way on my lumber cart. I find myself using this one way more than I ever thought I would because it's so handy, and if I'm working on a taller project, I just drop the table and it makes everything so much easier to reach. I'm looking forward to seeing what you build with your new anvil and table.

[@mkbcoolman]

I just picked up a new multi-process welder, and need to build a new cart. This is the perfect idea for my hobby shop. Having that folding extension is a brilliant idea. Nice work sir!!

[@Ollaris]

Thank you very much!

[@snoopu2601]

Thank you for sharing I'm in a wheelchair and I want to make a welding table but not to big just looking at many video's to see what kind I'm going to make. By far the best one I seen yet for me.

[@Ollaris]

Thank you very much. It might be not ideal for you in this particular hight and weight. It’s pretty heavy but i think you could alter the design to make it a bit lower and maybe with a smaller bottle. I think you could use the space underneath to get closer with your wheelchair. And im sure you could fold out the table part if you make it a bit lighter as well.

[@snoopu2601]

@@Ollaris thank you yes I was thinking the same thing I'll just get smaller square tubing and make it to my hight 32-34" . I have done many drawings of just the table I like the set up for the welder your right I probably won't have the bottles but I will make a spot for them just in case. I'll find some good casters for the table. There is a store in Berkeley California just for industrial casters they have all types of wheels. I have a place for the table but if I need to move it to a diffrent location I want to be able to move it. I see other people making welding table but they need a Crain to move them. I don't want my welding table like that. I know what you mean about the small table being heavy. It's like my GMC Suburban tail gate it is very heavy to lift even the back door over the tail gate with the window very heavy to lift I couldn't lift it because I was sitting to low.

[@indoremechanics]

simple and best weld table. This type of things Inspires me most. Great job

[@Ollaris]

Thanks!

[@BigPowerAL]

Looking to build a cart for my new welder. This is a really great example of a well designed cart. Well done !

[@Aardrijk1]

Terrific design!! I have got to build one of these for exactly the reasons you did! I'll probably watch this 30 times. :)

[@Ollaris]

Thank you very much! Glad it inspires you to make one!

[@saloram990]

so far coolest welding cart I ever see

[@Ollaris]

Thank you very much!

[@bryanm3433]

This is amazing man. Thank you for sharing this with us. Just got a new welder myself, and been trying to figure out how I'd have space for a table, and this is the absolute perfect solution. Thank you!

[@Ollaris]

Glad you enjoyed it!

[@kylecagle4808]

I watched this because the pop up table intrigued me. Excellent idea and excellent build on the cart entirely. I will be adding a pop up to my cart ASAP.

[@Ollaris]

Thanks Kyle!

[@SharpAndCunning]

Do you offer a set of plans that I can follow to make this? This looks like the perfect table for me

[@mastermat630]

the only down sid eI see would be that you have to lift the heavy bottle to put in the rack, but other than that nicely done !

[@billcarter1199]

Very cool man I'm needing to build a welding cart for mine never thought of adding a table to it to awsome

[@donvanco3078]

There's something really satisfying watching metal get welded then ground smooth. Another nice and very functional build!

[@Ollaris]

I love it too! Thanks Don!

[@JDLarge]

Perfect! Love the space saving thought put into this. Having a space tight workshop I think this will be my next build. Currently I’ve converted a small shopping cart into a mobile stand but still have to roll it over to a table so this idea nails two birds with one stone! Thanks for sharing👍🏻 I’m sold and a new sub now😉

[@Ollaris]

Thank you very much Joe!

[@Willeexd1337]

One of the best welding carts ive seen!

[@Ollaris]

Thank you very much!

[@woodbineshark]

thank you for sharing this great video, just picked up a mig and I'm looking for ideas on how to get setup in my shop, this is great nice work . M from Calgary Alberta Canada

[@Ollaris]

Thank you very much!

[@reforzar]

Dude! If I ever start welding I’m building this. Awesome idea. Calming video. Great work Seb.

[@Ollaris]

Thanks my friend!

[@DiesInEveryFilm]

Awesome work Sebastian love the fold out table design 👍🏼👍🏼👍🏼

[@Ollaris]

Thank you, brother!

[@danielecerone7536]

0u7yj

[@harduszandberg]

This is such a great idea! I'm fabricating one right now! Thanx for the great videos, gives me inspiration and some helpful tips.

[@Tiersmoke92555]

Tip- put the spot on the inner edges and it gets easier to square the frame.

[@Ollaris]

Thanks! I remember it for the next time!

[@alfredodokaj7177]

That is what is called smart craftsmanship Thank you for sharing

[@Ollaris]

Thank you very much Alfredo!

[@chybz]

Nicely done Seb ! As always, very clever design, thank you !

[@Ollaris]

Thanks Remy!

[@jbravo70]

You should sell these. Best one I seen so far.

[@JohnMadeit]

great design. when i get into welding i will have to use some of these ideas.

[@Ollaris]

Thanks John!

[@NeonLightedDreams]

I love the video! Only suggestion I would have is to spot weld a piece of steel cable from the pins that hold the table to the frame, so that when it's folded out, they're always right where you need them, and far less likely to lose them!

[@Ollaris]

Yes! Ive done that since than using some chains

[@NeonLightedDreams]

Ollari's Awesome! Love your videos, production style is very captivating yet not too overwhelming! Keep up the great work! Hoping for a collab with Jimmy DiResta in the future!

[@Ollaris]

Thank you very much! That would be amazing!

[@JDLarge]

Such a smart design! You’ve given me some great ideas thanks for sharing!

[@Ollaris]

Thank you very much for watching!

[@christofix]

This is a wonderful project. It brings me ideas to do this with my own welding machine. Just brilliant how you use the folding table in the cart. In this way, this takes up little space to store and you always have everything, wherever you go. I'll keep following you, I'm a fan!!!

[@Ollaris]

Thanks a lot Christofix!

[@StudioJLT]

Sweet cart! I don’t even weld and I want to make this.

[@Ollaris]

Thanks! Perfect, time to get started! ;-)

[@Jennifer-mt5cx]

trash if you dont nowe how to welding

[@markfryer9880]

Nice welding cart and the side table is an excellent idea. Just needs an adjustable swing stool and you are all set for when you weld up sub assemblies.

[@Ollaris]

Thank you Mark! The stool is something to consider. I don’t really know if it would be stable enough to sit on, although the big bottle is a nice counterweight.

[@marciosantana9879]

Amigo gostaria de saber as medidas usadas na construção. .

[@FreshAnton]

That Table Idea is SICK.

[@СерёгаизТаганрога]

Creator, greetings from Russia. Health to you.

[@простозритель-й3ж]

Приятно было смотреть.Руки золотые.

[@jaimeland9392]

Que capricho!!!! Parabéns pelo projeto 👏👏👏👏👏

[@jesusdelrio9163]

Máster class. Congratulations. Greetings from Aguascalientes Mexico.

[@MCsCreations]

Brilliant work, dude! Really nice! 😀

[@Ollaris]

Thanks man!

[@jacobbleary4806]

Wow! That's one hell of an idea and table/cart. Love it and have been trying to find good ideas about this build for my new welder and tanks. Thanks again for the straight and to the point video. Have a good one brother!

[@Ollaris]

Thanks a lot!

[@luisrobertosilva1606]

Parabéns brother, vou copiar seu projeto.

[@FavaretoSE]

Hehe eu também !

[@romildocaetano1739]

Quando pensamos que já vimos de tudo aí vem você e faz esta marilha de mesa (bancada) multifuncional. Parabéns pelo projeto.

[@andrericardoantunes5752]

Muito bom! Parabéns!

[@yar784]

Very big like from Ukraine! It is best what I see.

[@Ollaris]

Thank you very much!

[@amscout1156]

What a great idea. The table would be great for cart I've got my powertig welder on.

[@charlesstarkey5256]

A very very clever design well executed Sir! I tip my hat to you.

[@Ollaris]

Thank you very much Charles!

[@Add518]

جميل جداً ومميز 💙💙💙 تحياتي لك اخوك عدنان من السعودية 🇸🇦

[@BrothersMake]

So cool Sebastian! Wish we had space for a welder. Top of my list if/when we get to upgrade our workshop space!

[@Ollaris]

Thanks! I'm sure you both would love it!

[@tnyberg67]

Love the folding extention! Thanks for sharing.

[@PauloHirth]

For work, mobile and store all weld tools, great project!

[@Ollaris]

Thank you!

[@johndude70]

love the compact space saving design.

[@patrickezuma7140]

Nice looking cart

[@Ollaris]

Thanks

[@johnbyrne6637]

great job really like the way the table and legs fold

[@Ollaris]

Thanks John

[@STohme]

Very nice project with interesting design. Congratulations and thanks.

[@eddiealexander2485]

Nice trolley. Like the idea of fold-away table.

[@Ollaris]

Thank you Eddie!

[@sir_pig2110]

The folding table made me shook, really awesome cart dude👍

[@Ollaris]

Thank you very much!

[@KsSwordKing]

Hi. I inspire from your project and now i start to build a welding cart for myself. Cheers from Romania.

[@Ollaris]

Thank you very much! Greetings from Hungary.

[@christopherdubour6662]

That’s a pretty awesome track saw hack! Thanks for the tip!

[@christopherdubour6662]

Tips and tricks aside, great design and execution. (Now that i’ve finished watching)

[@Ollaris]

Thanks Chris! Yeah, I had doubts how well the hardboard holds while cutting metal, but it got barely warm.

[@sgsax]

Great design! Compact, yet good storage and nice-sized work surface. Thanks for sharing!

[@Ollaris]

Thanks Seth!

[@alexandremiranda8338]

Great job. Congratulations from Brazil.

[@Ollaris]

Thank you Alexandre!

[@BradHedges]

Excellent craftsmanship! Nice design, looks very practical. Well done!

[@Ollaris]

Thanks Brad!

[@paulshermet535]

I had made plans for one similar. I like yours better. Thanks.

[@Ollaris]

Thank you very much Paul! What are the things you would change on your design?

[@paulshermet535]

I was going to have the table at the same level as the welder, which would have made the table smaller, blocked on that end and splatter would get the welder unless there was a shield. Yours allows overhang on both ends, welder underneath away from the splatter. Still will add a drawer for the bits.

[@panick.attack]

Wow, great build!

[@saint27573]

Good job really fine craftsmanship .

[@Ollaris]

Thank you

[@nyankorunaway2446]

3:48 kakoii na! (cool) Last day, I tried to make trailer for use in my farm, but connecting arm was broken because of too small, I'll try again. I look up your skill. from Japan

[@Ollaris]

Thank you very much!

[@ROMAN-zr9jx]

Класс,а за встроенный стол еще пять классов)))

[@benwilliams1396]

I have the same welder but with a different logo and its the best one ive used for the money

[@NickDV007]

Great work 👍👍👍 A man of many talents 😎

[@Ollaris]

Haha! Thanks Nick! I try my best.

[@JohnSmith008]

Dude, this is very cool! Watching from Russia! Health to you and your loved ones!

[@Ollaris]

Thanks man!

[@dainiusivaska8151]

Very well made!

[@Ollaris]

Thank you!

[@scotthenderson4376]

Very nice you should sell the plans or the carts itself

[@Ollaris]

Thanks!

[@robertwellner1247]

Nice work nice foldout worktable

[@nickopedia5669]

Excellent design with the table, I'm in the same boat. Now I've gotta figure out a similar grid/edge table for plasma cutting on the other side.

[@Ollaris]

Thanks, I’ve done a video about that too! 😉

[@MarkKMake]

Hell of a job Seb! 100K subs on their way

[@Ollaris]

Thanks Mark! Yesss it's called coming!

[@Seteclata]

Great job, very top bro. I have an inverter very similar to this one (Boxer Migflex 160 BV), I think I will make a cart like this. Congrats and a big hug.

[@NeilJeanLouis]

Very brilliant, fallowing you from Dominican Republic

[@Ollaris]

Thank you very much!

[@graysmith9496]

That’s superb!

[@FooTech1976]

WOW man that is fantastic! Great job, and thank you for taking the time to film and share!

[@Ollaris]

Thank you very much for watching!

[@markust.8368]

Now this is a brilliant idea and very nicely done! I will be doing this after I finish my saunaproject. Thanks for sharing this!! 🙏

[@UniqueStance]

simple and clean! Nice work man!

[@Ollaris]

Thank you very much!

[@vrcustoms7]

Great idea. I wish I could saw that video few days earlier, cause I alredy made welding cart 3 days ago.

[@Ollaris]

thanks! Shoot, yeah I released it Sunday.

[@tomvana4270]

Nice welding shorts.

[@Ollaris]

Thanks!

[@ElBrisho]

How can anyone dislike. That was fucking CLEAN!!

[@Ollaris]

Thank you very much!

[@rubbermallet3873]

lovely 👌 an interesting concept of advanced technics - thanks 🤠👍

[@RestauraresiReparatii]

Nice project! Salutari din romania

[@Ollaris]

Thanks! I don’t speak romanian

[@tedhargiss1056]

Very nice Dude! Wish I would have seen yours before I built mine.

[@Ollaris]

Thank you very much!

[@karimnavejascato2824]

Very good job!

[@gregmantalaba3610]

Awesome project wilding Cart bro

[@raulrvg7914]

Que buen trabajo tío, ahora a darle mucho uso...

[@pitbullbite5835]

Nice table set-up!!

[@Ollaris]

Thank you very much!

[@benvin10365]

Excellent cart and build!!!

[@СергейВиноградов-л1ж]

Идея и реализация проекта - просто супер👍 Единственное пожелание автору видео - меньше сварки, либо через фильтра, очень некомфортно смотреть😝

[@luisduque3584]

Me la voy hacer....saludos desde México

[@alexbraga3706]

Graças a Deus e a esse cara eu sou o primeiro brasileiro amazonenses a fabricar uma bancada móvel dessa , tenho a minha bancada articulada a mais de 5 anos ....todo mundo gosta dela até hoje ...

[@RED_PARTIZAN92]

Very high quality and accurate work! A big Hello from the masters of Russia)))

[@Ollaris]

Thanks!

[@lancillottoprimo6605]

Nice welding table! Thanks for share ur ideas . !!!

[@Ollaris]

Thank you! Thanks for watching!

[@mikeward2890]

Nice job.

[@Ollaris]

Thanks!