Great idea with the file clamped to the radius block. Been at it 45 yrs and have never seen nor thought of doing that! Not sure I'll change my ways but I am going to at least give it a try next time!
@BaradaGuitars3 жыл бұрын
Many thanks for watching !
@philoudmn316325 күн бұрын
De l'or dans tes mains. Magnifique.
@OldSilkRoad3 жыл бұрын
Superb craftsmanship! I love your emphasis on accuracy.
@BaradaGuitars3 жыл бұрын
Many thanks !
@OldSilkRoad3 жыл бұрын
@@BaradaGuitars My pleasure!
@johnstitt26153 жыл бұрын
I will use the same truss on a neck fabrication project I am doing. I like simple and the ability to tweak the neck both ways. This project I may fail at and may have to slide off into the wastebasket but I will give it a go.
@JohnLee-mq4hk3 жыл бұрын
I think that's called a slab neck because of the thickness of the fret board, and I like it.
saludos desde cipolletti río negro república argentina ... se ve a lo lejos que trabajas con mucho amor... grande BARADA
@BaradaGuitars3 жыл бұрын
Manythanks Jorge!
@jorgecardoso66713 жыл бұрын
Jorgecardosomarcelo@gemail.com
@liyaAmazingTV3 жыл бұрын
Excellent work! legend!
@BaradaGuitars3 жыл бұрын
Many thanks
@johnstitt26153 жыл бұрын
I love this build you are doing my friend. My next build coming up I am going to do the same body finish....and few other ideas you gave me.
@BaradaGuitars3 жыл бұрын
Glad that’s a useful video! Thanks
@johnstitt26153 жыл бұрын
@@BaradaGuitars Getting Birchwood Casey filler and sealer and the true oil was not easy in Canada but it is on order. Two different stores I had to go to. Later ✌️🎸😎
@johnstitt26153 жыл бұрын
@@BaradaGuitars I tried applying the filler and sealer with a brush. Did one coat that way and realized your way of applying the the filler and sealer and true oil is the best way. ✌️🎸
@BaradaGuitars3 жыл бұрын
@@johnstitt2615 thank you!
@mistos3 жыл бұрын
Mr. Fletcher you are everywhere
@user-od4oh6wh1i3 жыл бұрын
Молодец!!!!Отличный мастер!!!
@BaradaGuitars3 жыл бұрын
Thank you!
@user-od4oh6wh1i3 жыл бұрын
@@BaradaGuitars Очень жаль что мне никогда не посчастливиться поиграть на ваших гитарах!!!!!Они просто великолепные!!!!!
@BaradaGuitars3 жыл бұрын
@@user-od4oh6wh1i I hope one day you do it! thanks a lot!
@StrudlePie8 ай бұрын
Yo at least you are doing it... BUT... I watch your videos to see mostly how not to do things... Or rather to get my mind to tell me better ways to improve upon your methods, so for that I thank you and keep going dude!! Much Love
@Steinstra-vj7wl2 ай бұрын
Great video. Do you make the same truss rod acces whole when you make a Maple fingerboard?
@musikchanel69752 жыл бұрын
Yes
@rokinrandy3 жыл бұрын
That is a good neck..You used a figured maple on neck. So does that mean it is a soft maple and that works ok for neck. I was told only use hard maple quarter sawn on neck.But i have some figured soft maple that is not quarter sawn that i would like to use on neck.Should I try to use it?
@user-nc7wz5yy2h3 жыл бұрын
Super awesome! After you polish tru oil with wet sandpaper, you use something like wax. What's that? Which brand does it come from? thank you!
@BaradaGuitars3 жыл бұрын
This was from the same company but I didn’t use it in this case
@jorgecardoso66713 жыл бұрын
me voy a permitir ponerte un apodo.... GENIOL....
@BaradaGuitars3 жыл бұрын
My honour!
@jorgecardoso66713 жыл бұрын
Necesito un mastil o cuello para mi stratocaster arce o maple de 22 freets o 22 trastes como decimos en argentina me podes decir cuanto me cuesta un mastil o cuello para stratocaster...?
@alviescott86762 жыл бұрын
Dude you are awesome i wish i could make a neck and body
@michaelwilliams9019 Жыл бұрын
you absolutely can, and should give it a go! My only recommendation is use inexpensive woods to practice your first builds.Flamed maple and ebony are expensive and should only be used after you've gained some confidence. It's heartbreaking to screw up an heirloom quality piece of wood.I speak from experience lol. Now go make some sawdust:)
@allguitar33493 жыл бұрын
I didn't think you woukd use a drill bit instead of an automatic center punch after using a micrometer for the tuner spacing.. anyway. Looks good. Hows she play ?
@sempakrangergg2 ай бұрын
Power tools 💰💰💰
@Dmitriy_Tkachenko Жыл бұрын
Подскажите пожалуйста, чем Вы натираете гриф?
@rosko6131663 жыл бұрын
excellent work. What kind of oil did you use to bring out the wood grain like that? Especially for the guitar body...
@clartypaths8403 жыл бұрын
tru oil
@rosko6131663 жыл бұрын
@@clartypaths840 only tru oil or do you use a base of another type of oil first? Can you please send me a link to know what kind of tru oil you used? thanks.
@theweekendluthier3 жыл бұрын
@@rosko613166 Tru Oil is a product name, it's made for gun stock handles but works great on guitars too. www.amazon.com/Birchwood-Casey-Tru-Oil-Stock-Finish/dp/B001I14QUU No other products required, just Tru Oil. 2-4 coats will give a nice matte finish. If you prefer glossy, keep adding thin coats (10-20 depending how thin you apply it). You can also use similar products, such as Crimson Guitar's Penetrating Oil www.crimsonguitars.com/products/penetrating-guitar-finishing-oil though I found the Crimson oil to be much stronger smelling and less pleasant to use.
@BaradaGuitars3 жыл бұрын
Many thanks! I'm using truoil as I said in the video
@rosko6131663 жыл бұрын
@@theweekendluthier thank you very much for this information.
@dr_jacko3 жыл бұрын
I'm really enjoying your videos and very much looking forward to seeing the finished strat! Are you building this as a commission?
@BaradaGuitars3 жыл бұрын
Thanks a lot for watching!
@emanuelpbjj3 жыл бұрын
Hi, may I know what are the cutter that you use to cut your frets?
@Osclala2 жыл бұрын
where did you buy your decal?
@batulalsayd47993 жыл бұрын
❤️❤️👏🏼😻
@BaradaGuitars3 жыл бұрын
Thanks!
@ahmetkymc55233 жыл бұрын
süperrrrrrrrrr
@crocodileproduction48823 жыл бұрын
How long is this neck?
@Flayed_Flesh232 жыл бұрын
Only thing i didn't like was the filling of the gaps between the fretwire an the fingerboard just seems like you went alittle too deep when cutting for the fretwire. Caused alittle more work for yourself than needed otherwise very well done.