Umarex Notos plenum mod

Notos plenum mod kit link is in the comment section

[@johnnybbgunner2136]

I have this kit for a while now on my camouflage version and it has performed flawlessly after 6 months.🤠🇺🇸

[@josephsaucedo8691]

Sweet awesome idea. In my opinion that end cap definitely should be replaced and made with a 1/8npt for a standard foster fill so you won't no longer need a fill probe a marauder pistol end cap will snap on to cover it up. Have a good one till the next one 🛠️💯👍✌️🎯

[@amrak-8401]

WARNING ⚠️ You cannot only install the Plenum I tried, because the original Notos moderator will not allow it because there’s no space when try to put back the air gauge cap.

[@ianprice2441]

Awesome.

[@WalnutandSteel]

I got mine and they are awesome!

[@johnnybbgunner2136]

NOTOS Nation!

[@richardniz]

Put mine on today and easy to install except for getting the stock moderator off but worth it in the end. Speed jumped from 735 to 770 fps.

[@ricko2766]

aren't there little pins to tap out that hold the moderator on? secure the work piece and tap out the 2 pins near the muzzle. why not just make a drop block that accepts a bigger tank? Please and thank you.

[@eaSTS9]

Some people don't want to add a bottle type and keep the tube. And people do make drop block adapters too...

[@tomanonbear]

I bought your kit, it looks awesome! But I screwed up the grub screw on the barrel, it's stripped. Any ideas on how to get it out? Barrel is still stuck.

[@c88air]

If you are very careful you can drill out the screw itself (don’t drill the threads, make sure the drill bit is smaller and doesn’t touch the threads) then retap it. Retapping it should push the rest of the remaining materials on the thread

[@surreallife777]

Where did you buy the kit? I don't see any link. I'm wondering if it will work on the Artemis pp750?

[@handygibby1]

I just ordered the plenum by itself I hope it fits.

[@WalnutandSteel]

so I followed your link and it says they are out of stock.

[@danhouse7565]

been a popular item on some forums....

[@TxGunRunner58]

Is it possible to use just the new plenum and not modify the moderator?

[@c88air]

The plenum moves the reservoir forward 45mm. If you have clearance then yes

[@TxGunRunner58]

45mm was too much! If someone wants it, it will be for sale!@@@c88air

[@surreallife777]

Will this work on the Artemis PP 750 if not do you know anybody who makes one for it? I don't see any link to the product

[@c88air]

I don’t have a pp750 in hand to confirm but the threads on the plenum is m16x1.0. You can find the kit on eBay under notos plenum

[@surreallife777]

@@c88air thank you

[@c88air]

Here’s the listing www.ebay.com/itm/404444248028?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2luzCe5vS26&sssrc=2051273&ssuid=2luzCe5vS26&var=&widget_ver=artemis&media=COPY

[@Light_357]

Lol. You need to pin this to the top

[@markbostic4706]

I got my kit , where did you cut your plastic moderator at?

[@c88air]

The Notos barrel measures 12.25inches. Once you pull the barrel off the action measure from the breech side to muzzle 12.5inches and you will clear the barrel when cutting. It’s about 1/4 inch clearance

[@markbostic4706]

@@c88air got it 12.5” from the breech side

[@ssmayassmaya6030]

Sweet just order mine

[@JamesTerry-be5be]

Can’t find the link on where to obtain the kit

[@justincredible7886]

Awesome. Can you post a how to install vid?

[@c88air]

Yes, I’ll have a video coming soon

[@romulomelendres9138]

How did you removed the suppressor do you have a video on it?

[@c88air]

There isn’t a video on removal but you would have to remove the barrel assembly from the action and use a hacksaw to remove the plastic moderator.

[@pestcontrolservice8653]

Yes I make the same and it works also possible to heat it up the plastic is very soft and you can cut is easily with a knife 🔪

[@robertstevens9656]

How difficult is it to remove the OEM moderator?

[@c88air]

Takes about 45mins using a hacksaw slowly going at it

[@robertstevens9656]

Thanks, I appreciate that. Any special technique to it, parallel with the barrel or slanted from moderator tip towards barrel, like a 45 degree cut?

[@c88air]

@@robertstevens9656 check out walnut and steel KZbin video. He goes over what’s needed to be done

[@eddiecahall3824]

Show it will work first. Or it is BS

[@josephsaucedo8691]

Hi I no your probably perty got a tone of work. I no a few people that have bought your parts👍 I was thinking that a drop block could be made or modifying one that pre made to the same theads that are on the plenum for a higher shot count making it a bottle airgun. Just a idea food for thought 🎯💯🛠️🇺🇸🔬🗜️👍✌️