Unbox And Set Up The Spider Farmer 6" Exhaust Fan And Smart Controller Kit

[@sammyd341]

Brother,i was stuck setting up mine. This video helped heaps . Much love from , Canberra Australia mate.

[@interffm8962]

Man, thanks for this video. The first one what I understood perfectly!

[@adriancasillas7086]

Super helpful video I didn’t even know some of the things you could do on the control! I’m setting mine up currently

[@TheHippieGeeks]

There are quite a few different settings in there for sure, thanks for watching!

[@aaronmarshall9847]

Wow I was using mine wrong for 3 weeks lol thanks bud

[@Alex-yu4yi]

Say for example if you set the fan for high humidity and/or high temperature in auto mode, I assume that means the fan ONLY turns on when these conditions are met? Then won't that starve your plants of co2, given no additional air is being sucked through the small opening into tent? Also won't this mean you will also get odour escaping when the fan is not on, coming out of the small opening? Also thanks so much for the video!

[@DabGrows]

I also have this question

[@MrAutoFlowaPowa]

This is why I opt to use it as an intake fan with an additional uncontrolled 6”inline fan as an exhaust. The exhaust runs constantly as normal at low level ,& this controlled intake will only kick on when temps are out of range & or humidity in turn sucking in fresh air from my lung room. That’s how I worked around it anyways hope that helps. !

[@MrAutoFlowaPowa]

@@DabGrowsanswered how I work around the isssue if it helps ! Take it easy growmie!

[@MrAutoFlowaPowa]

During veg use temp setting during flower use humidity setting that’s how I’ve done it

[@chirsenx3]

thank you dude, i have some issues with my controller, it "piep" really annoying sometimes, just like when the sensor cable isnt sticked in. i removed the cable from the controller multiple times and put it in again, did some settings with the speed of the fan but nothing worked. the controller itself works and i have no rly problems with it but the "piep" is so annoying -.- do you heared of that maybe or have a tip for me? written the support but no answer yet

[@areebshoa]

Turned out great ⭐️

[@TheHippieGeeks]

Thank you, and thanks for watching the video!

[@whit_wolf1367]

Awesome work!

[@TheHippieGeeks]

Thank you, we appreciate it!

[@DdDod-id5gg]

Keep up the good work

[@TheHippieGeeks]

Will do, thanks for watching the video!

[@buckreynolds7475]

Good job

[@TheHippieGeeks]

Thanks man!

[@MikeShaver-zx8ue]

A handy item..

[@TheHippieGeeks]

It has worked out all right for sure =) Thanks for watching!

[@prinzpielps2747]

Perfekt Video! Thx

[@tonymarcin]

Is it possible to set a different temperature and humidity during the day and at night and will the fan automatically change the power and fan speed according to the given values ​​during the day and night?

[@jsarkozi4935]

?

[@flashtu]

I think you forgott the smell factor is the most usecase by people which grows inside.

[@fashionday960]

Love this 🌸🌸🌸

[@TheHippieGeeks]

Thanks for taking the time to watch the video!

[@AffinityPhoto]

My grow tent temps during tehe day are going to be always higher than the room the racks are in due to 5 SF-2000 EVO lights and their powere supplies. Are any blowers capable of reversing airflow (invert the DC input to the motor) based on logic conditions? For me: if NIGHT and temp >60F then VENT IN outside air which is usually 50-65 where I live (zone 8b). if DAY and temp is > 85F, I need the fan to VENT OUT to release the heat and draw in room temps usually stable at 69-72F. Can I put two blowers in series and operate the one that corresponds to the conditions or will the idle fan impeller be too much resistance (or will it start spinning passively)?

[@jkhjjj-t2f]

Cool!

[@TheHippieGeeks]

Thanks for taking the time to watch the video!

[@wardahabid3786]

It is just awesome 🥊

[@TheHippieGeeks]

Thanks for watching the video!

[@thegamerpritom6516]

Cool post 😛

[@TheHippieGeeks]

Thank you for watching, and for the kind words!

[@Fano498]

Cool page

[@TheHippieGeeks]

Thank you, and thanks for watching the video!

[@veqz_fusion1600]

But automote fan dont run too? So it smells right??

[@gusmaschmann]

There was no info on how to put the thing together.

[@TheHippieGeeks]

What do you mean put it together, it comes fully assembled, you just need to plug in the cords and hook up the hoses.

[@ragner631]

I set it in auto mode the temperature rises to 25° and the exhaust fan makes a temperature of 25*

[@TheHippieGeeks]

Thanks for taking the time to watch the video!

[@EvenUSDT]

Post more often

[@TheHippieGeeks]

I will try, thank you for watching!

[@Harry-hs8fw]

Five points

[@TheHippieGeeks]

Thanks for taking the time to watch the video!

[@europeanambience]

How to switch it to C° nobody out of us use F°

[@flashtu]

USA, Liberia and Cayman Islands...to be exact but you are right. F and inch etc. are stoneage mesuring methods and no one in sience or ingenieur field use this.

[@mhancock17]

Did you not watch the video

[@andimaterie1711]

Can i Connect with my Phone ?❤ Andy

[@TheHippieGeeks]

No, unfortunatly there is no app connectivity with this unit.

[@Slayer_420]

🤘🪴💚

[@TheHippieGeeks]

As always, appreciate you watching the video!

[@nealtite5109]

This seems like a pointless controller. You want the fan to be on all the time, well so I've read, so it would be handy if you could set its default speed to 5 then if it gets too cold it could slow down to 1 or 2 the if it gets too hot it speeds up to 9 or 10. I find myself micro managing this thing I regret even buying it to replace my old fan. Needs a smarter controller or its not worth the $$$ IMO.

[@loky]

What a useless device this is. Why can't they make really automatic climate control? It's simple - you set the required temperature and the fan maintains it, if the temperature is higher than the set temperature - the controller itself increases the speed to bring down the temperature, if the temperature is lower, the fan reduces speed or turns off. What kind of fool invented an algorithm in which the fan either blows at the same speed or turns off? Does anyone know if there are controllers with the function I described?

[@jacquelinehesketh1359]

I do get your problem. I’m in the same confusion as you. Do you have an answer

[@Mrkempmann]

The one from ac infinity does the job these guys faked it without the actual settings to work with

[@CalmsonicNature]

Keep up the good work

[@TheHippieGeeks]

Thanks for taking the time to watch the video!

[@Mojo-zs7po]

Cool!

[@TheHippieGeeks]

Thank you!