UNBOX AND SETUP L1800 DTF PRINTER | INSTALL SOFTWARE AND ADD INK

[@CraftingwithDelonda]

00:00 Introduction to Unbox and Setup DTF Printer 02:21 Things I wish I had known before purchasing the printer 06:12 Unboxing the DTF Printer 08:06 Let's get a closer look at the table 08:30 The DTF Printer is out of the box 10:01 Let's Set up the DTF Printer 16:47 Let's look at the oven 19:49 Let's Install the DTF Rip Software 26:44 Let's Add Ink to the DTF Printer

[@KeriLeahy]

OMG…you are my hero! I was so lost until I found this video. THANK YOU!

[@CraftingwithDelonda]

You're very welcome.

[@franceslove5461]

Delonda you are one fantastic teacher/instructor. Thank you for freely sharing with us all. Can't wait for part 2.❤

[@CraftingwithDelonda]

Thank you so much ❤️ Tomorrow afternoon it will premiere.

[@bronzmen4527]

This is the best video tutorial for dtf printing for l1800 💯💯💯💯💯

[@CraftingwithDelonda]

Wow, thanks! I am about to post an update in about an hour.

[@eliznothere]

I so wish we had the same brand printer here because you are such a good teacher lol. I cant find set up tutorials for my machine anywhere

[@CraftingwithDelonda]

I'm so sorry to hear that. Are you able to contact the company?

[@fabianirmachavez]

I just received mine and so glad you make this video because I didn’t have a clue on how to start the installation.

[@CraftingwithDelonda]

The installation is the scariest part.

[@hillarydemello488]

What an exciting purchase! Looking forward to learning more about DTF with you!

[@CraftingwithDelonda]

Yay! Thank you!

[@miadixon6402]

Just got the new version of the DTF Printer in, your instructions was just what i needed to set up my printer. Thanks Delonda

[@CraftingwithDelonda]

That is very exciting! I am so glad it was helpful.

[@sheilapugh7851]

@miadixon6402 They have new version? Would you mind sharing the link? TIA

[@miadixon6402]

@@sheilapugh7851 I haven't set my up just yet, waiting on my desk to come in. I got my from Amazon.

[@purplepacion]

Didnt even think to research this before purchasing, but glad i have found this video! I've had a dtf printer before sonIm hoping Incan plug and play after uploading the drivers for it.

[@nahnisjourney1406]

Absolutely wonderful video! I’m looking forward to seeing part 2 of the beautiful red DTF Printer setup. Thanks for sharing. 🌹

[@CraftingwithDelonda]

Thanks for watching

[@nahnisjourney1406]

I woke up early AGAIN. So I’m watching your video again. I love how you have accented your space to coordinate with your DTF Printer. QUESTIONS: Have you uploaded part 2 of your series? Have you gotten more comfortable with your new DTF Printer. Will we get to see you using it? Or have I been missing your DTF videos?

[@ny5dgirl]

The ink button on the printer is for cleaning that way you don’t have to turn on your laptop every time you want to do the maintenance. Just hold it down for five seconds, and he starts doing the maintenance by itself

[@CraftingwithDelonda]

Thank you ❤️

[@natashahorner7617]

Thank you so much!!! I was so overwhelmed when I opened my box but your video put me at ease!

[@terrieballinger5761]

You are my favorite! Your personality and the way you explain things are the best! Now when I am looking up something, I check your page first. ❤️🦷💙

[@CraftingwithDelonda]

Thank you so much ❤️

[@hilloryrobinson5251]

Wow even though I am not purchasing this unit just watching this is a lot as you said but you have made it so comforting to apply the steps for anyone to at least get started so thank you awsome video ❤

[@CraftingwithDelonda]

You are so welcome

[@Gzusgeek]

Delonda...you do great videos! Thanks!

[@CraftingwithDelonda]

You are so welcome

[@Dijahdoo]

I just got this set. Will be here next week. Hoping for successful setup!

[@CraftingwithDelonda]

You can do it! Setup is the hardest part.

[@ny5dgirl]

Can I also tell you that the Waste tank, those little towels that they sent you you fold them put one on the bottom of the waste tank and don’t allow the tube to touch the ink or tissue it has to be all the way in the top so it won’t return dirty ink Inside the printer

[@CraftingwithDelonda]

Will do!

[@jessiegibson9023]

Congratulations on your new printer thanks ❤

[@CraftingwithDelonda]

Thank you

[@brendaanderson3680]

That seems like a lot of work sis. Thanks for this step 1.

[@CraftingwithDelonda]

Yes it was

[@nahnisjourney1406]

Love that red, Delonda!!! Congratulations on purchasing your very own DTF Printer! Girl, I’m nervous right along with you. But, I must say that you’re doing so well with the setup process that you don’t even seem nervous about it. You’re such a smart young lady. I would have had to take those two months learning about the printer before I even removed the contents from the crate. I’m such a chicken. 😂 I’m so happy for you! Thank you, Delonda, for sharing this portion of your journey. Dee

[@CraftingwithDelonda]

Thank you

[@nahnisjourney1406]

@@CraftingwithDelonda You’re most welcome. I love that it was available in your favorite color…RED! That made me so happy for you. Have a wonderful day, and a beautifully blessed week. Donna 🌹🌹🌹

[@cierradowns4991]

thank you i have had this in my cart 7 days debating

[@CraftingwithDelonda]

So far so good ❤️

[@lenayoung1497]

As usual, Delonda does it again..... Making learning fun... Lot of information, yet understandable.... This is quite easy, try pulling a watch together....talking about over load... 😂. Delonda makes it easy... Thanks Gurrrr

[@CraftingwithDelonda]

Thanks again!

[@victoriad1127]

Wow that printer looks hard core!!! So far I’ve had the best of luck with the eco 15000 that you recommended, that plus the film and powder are great! Especially cause this is just a hobby for me. Thank you and I can’t wait to see part 2

[@CraftingwithDelonda]

Thank you ❤️ Yeah, this one was different!

[@qianamajors4658]

Is there a video for that?

[@CraftingwithDelonda]

kzbin.info/www/bejne/iJrCZ6R_irOpo7c

[@Angel-TCCrafts2]

Wow…. You finally did it. I am proud of you. It’s alot 😮…. But you are doing it…. I think i will stick with sublimation for a while 😅. Thank you for explaining things and going slow with the steps. I cant wait to see part 2 😊

[@CraftingwithDelonda]

Thank you

[@mackenzietoombs5299]

Hi, I love your videos they're so informative! I just received my printer however, the thumb drive is empty. I'm not able to get ahold of the company through what's app. Do you happen to know how I would get the installation information from thumb drive? Thank you in advance!

[@sharmaynepillay5590]

Love watching your videos learning so much thank you

[@CraftingwithDelonda]

Thanks for watching ❤️

[@imsunne]

Excellent training as all ways Delonda, thank you

[@CraftingwithDelonda]

You’re welcome

[@jodiweiss4444]

Hello Delonda, I enjoyed and found both videos to be helpful in setting up my DSV printer. I’ve run into problems with the white ink and am wondering if you could share the info to contact someone for customer service? I would greatly appreciate it. I can’t find any information about who I can contact

[@CraftingwithDelonda]

It's on the Amazon site under your order information.

[@ny5dgirl]

The one with the ink is a blessing because if you’re not going to print that they just turn it on press the button, let it to its thing, turn it back off and you don’t have to worry about clogging the white ink

[@CraftingwithDelonda]

That's awesome! Thank you for telling me.

[@Corikay842]

Which one is that

[@MarcosCorrea-g5c]

Can this machine print to make cups too ?

[@ThatsSoLyssa_]

How's the maintenance ? Is it still working well?

[@HeatherHunterJ]

It’s called an oven 😂 ❤ I love this for you 🎉

[@CraftingwithDelonda]

🤣🤣🤣

[@19beckeann]

can you tell me what laptop you are using? Im looking at lenovas and boy theres so many. and thanks for all the help. Me and my 2 grandsons are gonna own many tshirts. lol

[@ΜΟΛΩΝΛΑΒΕ-μ5μ]

Do you get white ink issues? I have this same one and I cannot get my white under base to print properly. It prints very thin even when set to 100. Driving me crazy.

[@krystaldugas7489]

Delonda!!! Girl, thank you so much for this DTF 2 part series (your other videos as well)!!! Super helpful is an understatement!! Do you have a link to your laptop? I was told a gaming computer is best option for this software. Thank you!!!!!!!!!

[@CraftingwithDelonda]

You're welcome. I don't have a link to the laptop but it's a Lenovo IdeaPad 3

[@krystaldugas7489]

@@CraftingwithDelonda thank you!! I've followed all my steps but I am having trouble with the head cleaning, check nozzle. Do you have a whats app number for them? I can't find one on any tutorials or files. THANK YOU!!

[@CraftingwithDelonda]

@krystaldugas7489 I shared their contact information in this video. kzbin.infolNwSKFrc_oE?feature=share

[@casandrastephenson-iw9um]

Hello How did it work out for you does it still work? I get the felling they need lots of spare parts ready for something to break

[@CraftingwithDelonda]

It still works fine. I just don't use it often.

[@alexnganga3252]

Hello, is it possible for you to share the software. Got the exact printer but unfortunately am missing the software in my package?

[@kimredding30]

I am looking at this DTF printer. I am also looking at the i560. I need to know your real thoughts. I trust your judgment. Thanks

[@CraftingwithDelonda]

I love this one! I don't know about the other one you mentioned. So far, I've made about 250 transfers (maybe more) and I still love it. The ONLY downside is that their customer service is in China and the only way to get help is late at night.

[@anitahaskins6900]

I was thinking about getting one but I do not Torino that often. I’m still pondering on it. 😗

[@CraftingwithDelonda]

I totally understand

[@amandavincent5118]

@craftingwithDelonda DO I need to use the rip software that comes with the printer or can I use a rip software I already have?

[@19beckeann]

do you have the support information? i cant seem to find it

[@robinlynnscraftingjourney]

Hello from Kentucky

[@CraftingwithDelonda]

Hi there

[@Voshonl]

Hi Delonda! Thanks for the video. I’m trying to talk myself out of this printer…but I’m a shopper so I’m already making space for it! What length is your table?

[@CraftingwithDelonda]

You are so welcome! I love this table so much that I actually purchased this color and one in white. It is 63 x 24. amzn.to/3pvmEpJ

[@dianachau7857]

Hi, would you please explain or show how your keypads "S123" on the table WORKS? Thanks

[@CraftingwithDelonda]

Absolutely!

[@angieoglesby8349]

I've been looking and looking at this printer (the blue one) and now I know I'm getting it cause Delonda has it! ;) Thanks for the step by step...Love it very helpful!!!!

[@CraftingwithDelonda]

Glad I could help!

[@stryketec3318]

Can you print multiple images? Idk how to 😢

[@ILoveBnNatural]

I just received mine last week😊🙌🏽

[@CraftingwithDelonda]

Have you opened it yet?

[@ILoveBnNatural]

@@CraftingwithDelonda yes and I love it!!

[@Vvtravel]

Did you receive your ink inside the shipping box. I did not have any in mine :(

[@styledbyroben7782]

Do you have a video detailing the difference between sublimation and DTF other than one is direct and one is printed on a sheet. I guess my question is what is the beneficial difference in the two.

[@CraftingwithDelonda]

Definitely too much to type. With sublimation you are limited to using white/light colored polyester. With DTF there is no limit.

[@CreationsbyKimberly]

Can I use Cricut Design Space or Silhouette to create my images and print with this?

[@CraftingwithDelonda]

Yes

[@andreastewart4215]

I believe that this is quite possibly the first time I’ve seen you wear something that has nothing on it. I’m pretty sure everything you’ve worn has had something created by the Delonda. Oh and great tutorial part 1

[@CraftingwithDelonda]

I was freezing and I grabbed the first hoodie I could find and it was huge 🤣🤣🤣

[@meiyee4096]

Love your peg board system. Where did you purchase? Was it easy to install?

[@CraftingwithDelonda]

Thank you ❤️ It was extremely easy because I used the 3M hooks. Everything is linked in my Amazon Storefront. www.amazon.com/shop/cricutingwithdelonda

[@mncustom-made-barblafond6825]

Hi Delonda! Hello Everyone!

[@CraftingwithDelonda]

Hi there!

[@brridgettbarnes6437]

awesome

[@CraftingwithDelonda]

Thank you ❤️

[@karlaromo7043]

Hello, I do have a question, the printer must be connected via usb?

[@CraftingwithDelonda]

I have all of my printers connected via USB. I have 5 printers and every one of them is directly connected.

[@nikibbrown]

do you know if using another type of ink will void the warranty? It seems they are the only ones who sell the ink I need, Its very expensive and I hate having to wail so long to receive it.

[@CraftingwithDelonda]

I don't think so. I haven't tried using a different kind because I haven't run out yet. Double check on the description from Amazon. How long have you had it?

[@dianachau7857]

Hi, how often do I need to do the maintenance? Would you have a video please? Thanks

[@CraftingwithDelonda]

I am definitely going to do some follow-up. They recommend daily maintenance. I usually do every other day.

[@AnsegaPrints-cz5eb]

Hi. Did you turn it OFF or leave it On after you finish your prints.??(( There are 2 bottoms. One push bottom that is in front of it and the red switch behind the printer.)). I hear many people keeping their printer ON.

[@CraftingwithDelonda]

I turn both of them off.

[@AnsegaPrints-cz5eb]

@@CraftingwithDelonda thank you 😊

[@CityBears704]

I have a question how do you get it to print the whites letters mine won’t print white

[@jonadelenepaira2537]

hello thanks for the info.. may ask where can we avail the software

[@CraftingwithDelonda]

You're welcome. The software comes with the printer.

[@DawnSonnier]

My printer didn't come with the ink or powder. The description said it would come separately. Do you know when I will get it?

[@CraftingwithDelonda]

You will probably get an email. I actually received the ink and powder before I received the printer.

[@purplepacion]

​​@CraftingwithDelonda Same here. My ink and powder came last week. Printer today. 2 days ahead of the schedule delivery date! 🤗

[@ashleytemples6183]

Just found your video and considering purchasing this printer. Do you find it is worth the purchase?

[@CraftingwithDelonda]

In my opinion, you only need a DTF printer if you have a small business and you are planning to use it every single day to produce mass amounts of DTF transfers. If you aren't planning to do that, it would be more cost effective to purchase transfers from a company. These printers have to be used every single day or the ink will get clogged and it is hard to unclog them.

[@salenthiathomas9444]

Where did you purchase the table

[@CraftingwithDelonda]

Amazon amzn.to/3TO4Bbd

[@ethelf3]

Hey crafting with Delonda, I hate to be a bother, but I would like to know what type of laptop do you use for your cricuting

[@CraftingwithDelonda]

No bother. I have a Lenovo.

[@louisemcclain6189]

Hello Delonda and everyone

[@CraftingwithDelonda]

Hi there

[@mojoTx]

Can the L1800 print 13 inches wide

[@SheRockPrintsEvents-wf6xd]

12.95

[@mojoTx]

@@SheRockPrintsEvents-wf6xd can you recommend the best roll of film that’s I can reach that

[@kaylalanphear4803]

can this print gang sheets love your videos

[@CraftingwithDelonda]

I would say no because this one only goes up to A3. I don't have the roll feeder.

[@Dijahdoo]

Do u know if u can u use other Rip software like cadlink with this printer?

[@CraftingwithDelonda]

I can ask the rep from the company.

[@Mrs.MommaJonesy]

I would be curious to know what their answer was as well @@CraftingwithDelonda

[@Vvtravel]

Delonda where was your ink. I received mine today but there was no included in the box.

[@CraftingwithDelonda]

My ink came in a separate package.

[@knafis]

What brand is tht?

[@CraftingwithDelonda]

DSV

[@winskids6341]

My printer head is stuck and won’t move. Who fixes these things

[@MrBluepitbullbronx]

mine finally arrived its all set up and I can't install the drivers it don't even say 32 or 64 bit anymore. I load up both drives the manual and the rip software but I don't see it anymore. please help me I downloaded WhatsApp on my phone and the laptop. but I still can not find dsv support.

[@saulpolancosalazar]

I am having the same issue. Were you able to fix the problem?

[@CraftingwithDelonda]

Their contact info is on the Amazon website with their name. You can also reach them at [e-mail]

[@salenthiathomas9444]

My printer didn't come with a driver nor software. I am lost as to what i am suppose to do now.

[@CraftingwithDelonda]

That's strange. Where did you purchase it from?

[@wendigarcia7580]

Do you like this printer? Would you recommend this printer?

[@nicoletteshow4817]

I asked my husband to buy me one of these. He asked me if I was out of my mind.😂

[@CraftingwithDelonda]

Now, it's time for your rebuttal. I always go with shut up, lol

[@milansuperjuega7945]

My computer is an.Lenovo but I don't why can't open the usb sofware to my DSV printer.. deactivated all anti-virus. And that's not work.

[@milansuperjuega7945]

Know *

[@CraftingwithDelonda]

Did you remove it and try it in a different port?

[@siobhanmilan4506]

I can not find a Tech Support number to call. Can anyone help me. My RIP software worked then printer didnt now the printer software is finally downloaded and now Rip isnt working

[@CraftingwithDelonda]

When that happens, I re-install the software. Look for them in the app called Whatsapp

[@siobhanmilan4506]

who do i search in whats app? I tried L1800 and nothing @@CraftingwithDelonda

[@christiemoore6902]

I have an L1800 DTF Printer and it has been printing fine. All of a sudden, the colors are not printing correctly, i.e. gray is printing green or blue, gold is printing yellow and brown is printing green. Is there some setting that I need to change? Just wondering if anyone else has had this problem. Thanks!

[@CraftingwithDelonda]

If you have this model, they are going to suggest that pull the waste away from the waste tank, pull ink away from each color, and do a print head cleaning.

[@christiemoore6902]

Thank you so much! I will do that now. @@CraftingwithDelonda

[@teresajoshua6963]

Why did you decide to go with this DTF printer?

[@CraftingwithDelonda]

It was the cheapest one I could find.

[@purplepacion]

I chose this one because I could get it sooner. The reviews have been pretty good as well.

[@cierradowns4991]

i cant get my white to work day 3

[@CraftingwithDelonda]

Oh no. Have you contacted the company?

[@ny5dgirl]

I hope it helps ❤

[@CraftingwithDelonda]

It really does.

[@emilyhernandez874]

Hi don’t know if there’s a link to download the software I have all my virus off my computer still not able to read the usb please help

[@CraftingwithDelonda]

I don't have a link to download the software. If it doesn't work in one USB, remove it and try a different one.

[@tammyharris3248]

MAYDAY MAYDAY.... SOS SOS Im going down... How did you contact them to get assistance?

[@CraftingwithDelonda]

Oh no! What happened?

[@tammyharris3248]

@@CraftingwithDelonda I can’t get the white ink to print. One of the dampers will not aspirate and pull the ink from the line into the daper.

[@CityBears704]

Am having the same issue

[@tammyharris3248]

i ended up pulling the line from the box and it was stopped up@@CityBears704

[@reynosoguardadovlogs4276]

I need their number I can’t install my printer

[@BreeLvee]

I Want This So Bad But Im Having A Hard Time Forking Up $2,700 Like That🥴😭‼️

[@JoseRojas-nq5ky]

This video is everywhere in a bad way

[@CraftingwithDelonda]

There are millions of KZbin videos and you took time out of your day to stop and say that??? Seek therapy.

[@ny5dgirl]

And the one that looks like a recycle bin is when you wanna cancel a job just hold it down and he will stop printing

[@CraftingwithDelonda]

Thank you ❤

[@tbseverythingadobe4999]

That's the problem with buying something from China.

[@CraftingwithDelonda]

You're right

[@19beckeann]

don t buy this crap. i have had to change my white dampers now 3 times they keep getting black in them. replaced it and i have pulled my syringe back 200 times and still no ink flow. biggest pain...

[@Emilydiane95]

I had the same issue, I’ve continuously contacted the company to see if I can get a print head replacement, to the point where they stopped replying to me and will not do anything about it or offer any kind of part replacement. 0/10 recommend this printer. And now have lost an absurd amount of money since my printer is not usable.

[@BrittanyWalker-h8x]

Hey, thank you for all of the information. Could you please tell me how you contacted them on WhatsApp

[@CraftingwithDelonda]

You're welcome. Look on Amazon. The contact info is there.

[@gottagotomoes5056]

Hi, quick question, sorry in advance if you said this and I just missed it, do I need to by a heat press separate and if I do what do u recommend ?

[@CraftingwithDelonda]

Hi there, yes you will need a heat press. I recommend getting the biggest one you can afford.

[@gottagotomoes5056]

She Fine!

[@CraftingwithDelonda]

❤️❤️❤️

[@KeriLeahy]

OMG…you are my hero! I was so lost until I found this video. THANK YOU!

[@CraftingwithDelonda]

You're welcome 😊