Unboxing and installation of fingerprint door access control device.

[@SubhadeepDey1561]

Today suddenly my access system power supply stopped working , i went to market with my sample old access power supply, they were charging like amazon rate 1500/- ...after i saw ur video i bought a simple 12 volt adapter from market at 80/- rupees and followed ur diagram. my finger print door access wiring little different but i very easily figured it out where to attach the COM and NO wires. my Lock started working . excellent u saved me from buying special access control power supply. thanks for the detailed video ... Truely thank you for this video..

[@ajitchhokar]

Thanks for the video. Very good work. I am using alba urmet electronic lock with this biometric access system. I have connected diode also. Is diode needed with electronic lock??

[@SatishVermaa]

Yes,

[@ajitchhokar]

@@SatishVermaathanks for your prompt reply.. actualy you have told EM lock in the video. Thats why i wanted to confirm. The electronic lock is making sound. I have set unlock duration to 1 second. This sound was not there before connecting biometric access system

[@SatishVermaa]

Can you share link of lock you have used. Then I can help out.

[@ajitchhokar]

@@SatishVermaa its alba urmet electronic lock. Its same lock which you have used in your video

[@SatishVermaa]

If you have purchased online then please share its link. If it is same link CP plus used in video. Then it is a EM lock and you should use diode in reverse polarity.

[@garimapant3185]

Very nice explanation.

[@saluferozpuri]

excellent work buddy. thanks for this video. very helpfull

[@cyclonudista]

It seems like my model has the same name but the wiring is different, how could this be? Where could I find the right video explanation? 😊

[@auscarmmanjamwada5531]

how can we configure the fingerprint on Access Controller model FR500EM. we have done the installation but we need to configure it. mind you this model has only a star (*) but without the hash button

[@rupeshchavan4022]

Can you share manual password and 💳 attach process ?

[@vinodmagaji8826]

Sir I want this device.... Can you provide me with the amazon link...

[@santanubasak7758]

What happens if someone open the access control unit and provide power to the lock..... Then it automatically open

[@SatishVermaa]

Santanu Basak yes it will open. Tempering excess control can only flash audible alarm.

[@rakeshbarik9785]

Can you provide the link for this

[@SatishVermaa]

Link of what

[@rakeshbarik9785]

Satish Verma link to purchase this product and can you tell me how will the door open during power cut when there's no electricity

[@SatishVermaa]

Rakesh Barik you can buy biometric door access from Amazon. Premiumav Biometric Fingerprint Access Control Machine Digital Electric RFID Reader Scanner Sensor Code System For Door Lock www.amazon.in/dp/B076MXQVFP/ref=cm_sw_r_cp_apa_i_N3uIAbK4AFZYA

[@SatishVermaa]

Cp plus em lock CP Plus Electronic Door Lock www.amazon.in/dp/B017K9WALA/ref=cm_sw_r_cp_apa_i_R4uIAbYWN71V0

[@SatishVermaa]

In case of electricity failure you can open using manual key provided with cp plus em lock. Or you should install small ups with it.

[@ajudem7]

my friend can i ask for a copy of your user manual?

[@SatishVermaa]

yes

[@md.habiburrahman8068]

Could u plz help me for install video door phone with it?

[@SatishVermaa]

Md. Habibur Rahman yes. Which door phone you are using.

[@md.habiburrahman8068]

CP Plus CP-NVK-70M1

[@erwinfarias]

Could you please send me this manual by photo or scan?

[@auscarmmanjamwada5531]

WHAT WE NEED IS TO CONFIGURE THE FINGERPRINTS .