unboxing and modding of a Toyan L400 engine - Nitro screams! 4 cyl 4 stroke RC

Assembly of an 4 cylinder 4 stroke Rc engine - and as usual, it will get modded in a Timsane way!
Unboxing and presentation of the Toyan L-400 engine
Find it here:
Extra 10% off: timsane
Toyan FS-L400 Engine: bit.ly/3oWaRua

[@claytontroutt9340]

I see Johnny Q90 on you tube and he had to lap the valves to get them not to leak. It help it a bunch...

[@samanhabib5591]

i was all "how the f is gonna polish those tiny things?" and of course he had a simple ingenius solution i will be borrowing XD

[@mickmuzzmkmz1628]

Yes I made it to the end! The talking wasn't boring at all, I (for one) found it interesting. I can't wait to see you hot this thing up, It's going to be sweet!!🤩💥🤯👍

[@timsane]

Thank you! I also hope it will be a nice result in the end... I have a pretty clear picture in mind which might thrill a couple of people...

[@DJDEVIL82]

Solche Videos werden komplett geschaut. Da ist nichts langweilig. Slcher Content sieht sich jeder Technik-Freak gerne an. Weiter so. 👍

[@timsane]

Vielen Dank! Auch das Du als deutscher Dich durch mein englisch kämpfst ;-) Gruss aus Nienstädt

[@DJDEVIL82]

@@timsane BIn zwar Schwizer. 🤣 Wenn der Content interessant ist, ist die Sprache egal. 👍

[@CMBProjects]

Great vid!! Nice to see more videos!

[@Matty.Hill_87]

Timsane in the membrane... Timsane in the brain... 🤣🤣

[@mickmuzzmkmz1628]

His Timsane, got beaucoup brain!🤣

[@kravenkrawlhobby5438]

Thank god Tim, I was wondering what happened. Glad to hear your still alive and doing Timsane projects. Your an inspiration, just make a guy want to strive to build better. Get that Willy’s out on the road.....been waiting way to long. Made my day bro.👍

[@timsane]

Thanks! We do have about three feet deep snow right now... I need a couple degrees more outside to get it on the ground again. Thanks for commenting!

[@1rclife184]

That motor is insane man nice build

[@timsane]

Thanks!

[@tonysansom]

Wow! As an RC enthusiast and frustrated engineer, this is the kind of content I looooooove!! That engine is a beautiful feat of miniaturisation and your frame is beautiful too! Can't wait to see more!

[@timsane]

Thank you very much ! You know how it is.... body is a adult but the mind will always stay like an 10 year old. If you add some machining possibilities and a few dollars, only the sky is the limit 🚀

[@Steven-cr8ju]

Excellent! Can you port another engine head and sell to me? 😊

[@michaelhensley7974]

your “boring” talking is very informative

[@fabricationnation8052]

Were so glad your back to making videos....love seeing quality work

[@fabricationnation8052]

Not to change the subject, but what kind of cylinder heads do you make.....we're big into the small block Chevy stuff.....I have a 406 with big Brodix aluminum heads.....and where are you even from?

[@donsmith9797]

Still here and your right it is a piece of art

[@timsane]

Thanks

[@jim9310]

I'm so glad to see you're back!!! Love it so much. I hope you're do well. You have such a great talent and I love watching your machine work and creativity with your builds!!!

[@timsane]

Very nice comment, thanks for that!

[@speckledjim_]

I forsee great things for this channel. It's bloomin marvelous

[@seanroche4277]

Very good information, you are certainly not boring. I would love to buy one of these engines. Well done !!

[@timsane]

You will not regret it! So much fun and a bargain for all the parts! And trust me, I am saying this because i LOVE that thing!

[@fattrainman04]

great video not boring at all hope you feel well soon

[@hemiboyrcbmxerwilliams7599]

I especially love the wheels. Great project.

[@tj84vinnie]

Absolutely beautiful this sort of kit would be amazing for school's aswell.

[@timsane]

I thought about that too! The website stirlingkit sells a lot of stuff I will use to show my children how engines are working.

[@marcusgarvey7778]

Man it would be perfect. A little change from the mind numbing jargon their forcing into the minds of our youth.

[@jimmccabe801]

Great to have you back. Great video. Thanks.

[@timsane]

Thanks, i am happy that you appreciate the content.

[@Aussieknuckleheads]

So good to see you posting again 🤘 & yes I made it to the end & didn't find any of the video "boring"

[@MrFredshb]

I want one. I can't wait for the updates. It looks badass

[@timsane]

I do not like advertising but I think you saw that i am stoked ! Buy one, best Lego kit you will ever own!

[@MrCarnutbill67]

Finally someone used assembly lube putting one of these together. Check out JohnnyQ90 He hand lapped the valves on his and got another 4K rpm.

[@mickmuzzmkmz1628]

That was the twin cylinder version, but the same can be applied here.

[@timsane]

I will go a little further than that... waiting for parts now. Thanks for your comment!

[@skyffi6475]

Super geil! Schön dass du wieder da bist :) Und gute Besserung!

[@timsane]

Danke Dir!

[@andrefernkorn]

Ein echt gut gemachtes Video. Ich freu mich schon auf das Projekt 😁.

[@timsane]

Vielen Dank 🙏🏻

[@teltwosheds2972]

What a lovely little engine. Was looking forward to a close up of the rockers, but heyho great video.

[@mickmuzzmkmz1628]

JohnnyQ90 shows the components in more detail if you wanna have a look.

[@plueschAMAZONE]

Wenn die großen Jungs spielen, sind die glücklich ... ich gönn es Dir. Die Detailtiefe ist wirklich irre, geiles Kit.

[@timsane]

Vielen Dank, sehr netter Kommentar!

[@plueschAMAZONE]

@@timsane gern doch!

[@adammilburn8855]

Love your enthusiasm for this engine - really looking fwd to seeing how you improve it 🤘🏼

[@timsane]

Me too ;-)

[@jameskauffman8405]

Still here. Your doing a good job.

[@timsane]

Thanks!

[@captnjaygreybeard6394]

Great engine kit, looking forward to more videos with it.

[@vintagemind8155]

You had me at valve cover 🤗, I can’t wait to tell the wife 😡 she’ll be thrilled .....😁

[@tyronesporke]

awesome job!

[@timsane]

Thank you very much!

[@funnyanimals8053]

I hope you will make a 4-rotor OS rotary engine one day 😎

[@timsane]

I checked into that... that would be expensive like crazy 😩 Maybe one day when i start to earn some money here. Thanks for watching!

[@funnyanimals8053]

@@timsane, best wishes and hope your channel excel!

[@shrekiic6630]

oh yes i watch it all. Just like all of your videos

[@timsane]

That makes me happy, thank you for your support!

[@spooge33]

Amazing engine!! Is that a glass of beer on your desk? I'm hoping.

[@timsane]

Apple juice!

[@mattgaming8717]

Love these new era nitros. Bye bye oldys. Id build it just to have it.

[@timsane]

Same here! It is nice enough to be displayed in a living room. Order one, you wont regret that!

[@jdsstegman]

A manometer goes a long way on these motors. But the factory throttle link doesn't allow for adjustability. So I made intake runners with a vacuum ports to set all 4 carbs. Just like you do with a real engine.

[@timsane]

Thanks! I think the stock carburetors will not stay for long...

[@InterestingEndeavors]

Can't wait to see this!

[@strydyrhellzrydyr1345]

I have that Lucas assembly lube... Great stuff.. might be a bit much for this small of an engine though

[@tylervanorman492]

I made it!!! Great info

[@johncarlson8029]

The parts are like jewellery for men ...Yes? When i was younger my brother and i used to build Chrysler products. He liked big block and i like small block, but jewellery none the less.

[@timsane]

Same here... some parts are nearly too nice to drive. I enjoy watching finished parts a lot

[@timsternagel6741]

Sehr coole Videos hast du auf deinem Kanal. Ich finde es klasse das du selber auch viele Teil anfertigst. Welchen Sprit hast du für den Toyan L400 Motor verwendet ? ich hab mir auch den Motor gekauft. Ich bin gespannt was noch alles zu dem Motor von Toyan kommt !

[@brucefredrick4200]

I saw your post on a center main for the L400. Have you had a chance to run the engine to see if the center main prevents that crank failure?

[@Fairlane55]

Why wouldnt they have machined a center main bearing for the crankshaft?

[@Greg_Thomas3128]

Does the starter kit (the wiring spark plugs and motor) come with the engine?

[@timsane]

No sir, you need to order that as an option.

[@beemcbike]

Amazing piece of art 👍🇨🇭

[@timsane]

Thank you! I think you might like the end result i have in mind! Thanks!

[@dabosssr24]

JohnnyQ90 did a quick unboxing and build video for the toyan 4cyl engine.

[@timsane]

I saw that too! Thanks for your comment.

[@richardseabourne9545]

Love this, very interesting

[@timsane]

Thanks

[@burntorangeak]

Hi Tim. Glad you're feeling better. Have you ever been to a sprint car race, or speed shop? I grew up around them. P. S. Your format is great. Monolog is entertaining.

[@timsane]

Hey! No, unfortunately I havenˋt. I am sure there is not a single sprint car anywhere in germany... I would love to come to the states and visit a big event! Thanks for your comment.

[@ashersalt2156]

Do you have a link to a starter belt that I can order from Amazon? Or what size they are

[@rudolphrogers7996]

Hey how are you seen this video and would like your help on getting the specs for your frame thanks

[@rodneyeamon9876]

What rear end are you using. Would really like to know thank you.

[@Rivascalemodelboat]

Hi, are you on vacation, I sent an email that I would like to order both Chrankshaf support and Camshaft bearing. But have not heard from you, is it because you have been away from your mail or is it because it is "sold out"

[@davidchilds6505]

Yeah still here... Didn't find anything to be boring,,.

[@timsane]

Thank you!

[@insanewayne75]

11.00 still here Tim.

[@timsane]

great, thanks! I like your nickname 😉

[@insanewayne75]

@@timsane my friends started calling me it after the way I started drifting my car and riding my bikes.

[@timsane]

@@insanewayne75 Great, but stay safe! We will get to new insanity levels here this year! Looking forward to have you on board!

[@insanewayne75]

@@timsane really looking forward to seeing your new insane content. Have a look at the videos on my channel. I went through a phase of loving stair gaps and hucking off anything over 8ft high. Biggest stair gap was at Brighton Marina. I was very scared at first, but the adrenaline afterwards was intoxicating.

[@denny75t]

I'm also buying this amazing Toyan engine. can you tell me what brand is the frame and billet wheels you use? thank you 😊

[@timsane]

Both parts are made by me ;-) Unfortunately parts like that are not available anywhere so I machine and build them on my own.

[@HybelFever]

ofc im still here!

[@timsane]

Thanks for watching

[@ShadowOppsRC]

Not boreing in the least bit!

[@timsane]

Thanks!

[@erdinciskenderilgun8469]

look at the those stuff..hes in austuralia @ Gazza O and also v12 factory hes in austria which is very closer to you..

[@yotarolla5651]

Did u have a problem with the water pump not turning well?

[@timsane]

I did! Did you experience sth Similar ?

[@drbelli]

15:43 Thats not rich... thats a Ellon Musk wealthy* mixture =D , what if u put a spark or a flame to make it turn that into a 4 cyl flamethrower ??? XD Nice "TOYan" , sounding like a zillion bucks even untuned =]

[@o0ooo0]

Sweet

[@kikkerbare]

whats up with the Grave Digger?

[@timsane]

paused project... check the previous video for more details. Thanks for your comment!

[@nextlevel7821]

🤠👍

[@petertothRC-FPV]

Overdose on eye candy😍

[@timsane]

Thanks!

[@dirtydon8661]

I’m still here lol

[@timsane]

Hard to believe after my lack of entertaining skills ! Thanks !

[@1worldgaming18]

i like layercake (for the algoritm)

[@MaNNeRz91]

"maybe for shipping porpoises"

[@timsane]

Vielleicht auch nicht 😀

[@MaNNeRz91]

@@timsane 😂😂😂🐢

[@timsane]

@@MaNNeRz91 Sometimes this happens, sorry 😄😇

[@MaNNeRz91]

@@timsane just keep making awesome stuff! ✌️

[@InterestingEndeavors]

Still here after the so called boring taking.

[@timsane]

Thanks! When editing I am always thinking I am sooo far away of beeing an entertainer.... like a cow that is starting to fly... (hopefully that english was understandable) ;-)

[@InterestingEndeavors]

Yes great English. And I love seeing other people do timsane things with engines. :) I'm a gearhead and like seeing other ideas and creations.

[@derhein3567]

Du bist doch Mr. NG Motorsports wichtig? Zuerst kam mir die Stimme bekannt vor und dann das Tattoo.

[@timsane]

Mit NG-Motorsports stehe ich tatsächlich in Kontakt 😄 Danke fürs Zuschauen! Gruss, Tim

[@derhein3567]

Für eure 5 Achs Fräse wird der Kopf wohl ein Tick zu klein sein. JohnnyQ90 hat eine mini 5Achs Fräse. Die Anschaffung wäre doch eine Überlegung wert.

[@timsane]

@@derhein3567 Die habe ich mir schon öfter angeguckt, mag die Maschine aber nicht wirklich. Den Kopf von diesem Motor werde ich per Hand machen. Dazu wird es noch ein paar Videos geben

[@derhein3567]

Ich bin gespannt. Kanal ist auf jeden Fall Abonniert. Wäre auch cool den Kopf auf der Flow Bench zu sehen.

[@timsane]

@@derhein3567 Ich will noch nicht zu viel verraten, aber ich glaube der kommende Inhalt wird für viele sehr sehr spannend. Schön das du dabei bleibst! Gruß

[@insanewayne75]

#kevintalbot

[@insanewayne75]

Trying to tag Kevin to this channel. I think he will appreciate this content.

[@mojoracing8834]

Too simple for me lol make a scale car sorry but that is a waste of a good engine

[@timsane]

what do you have in mind? Look in my other projects if you like

[@mojoracing8834]

@@timsane i will look at some more of yr projects ... front engine sports car