Unboxing CHINLY Star Light 32W 1000 PCS / Stück LED Fiber Optic Light Star Ceiling Kit Lights APP 5m
Пікірлер: 371
@StoneTechReview2 жыл бұрын
Can be found on Amazon (US) www.amazon.com/dp/B071WJYXBX (U.K) www.amazon.co.uk/dp/B0791CX8M2 (France) www.amazon.fr/dp/B09CFZPSLJ (Germany): amzn.to/2T5DecG
@npautomation2 жыл бұрын
For india
@Gs-mk4qi2 жыл бұрын
Available in India ??
@derricka.mccormick65483 жыл бұрын
This Is the coolest thing I have ever seen. Perfect for hanging out with that special someone or just alone listening to some chill music. Either way I was relaxed just watching it
@catiloh60863 жыл бұрын
Smoke a joint and rock a couple beers after work while sitting in the car 😴
@calvinlittle90703 жыл бұрын
@@catiloh6086 1qaarar
@andrenewcomb37082 жыл бұрын
I saw a 30' van one evening that had fiberoptic on the side. Smiles.
@giangleinh17333 жыл бұрын
Thanks, if I had a car I would have done it! Very beautiful, very wonderful!
@StoneTechReview3 жыл бұрын
Thank you
@MR54TSN2 жыл бұрын
First, great video, thanks for uploading. Looking to purchase a kit however there are so many out there at the moment. 10w, 20w, 32w etc I assume its all to do with power/brightness. As you have installed the 32w kit, do you use the full brightness or have then dimmed down? Have you installed different size fibres to make the sky light look more realistic? Many thanks.
@user-lf9xl2tn1t2 жыл бұрын
This is so beautiful and unique!!!
@chatter7653 Жыл бұрын
I didn't know this even was a thing but now must have it for a suv camper :)
@sadanm37643 жыл бұрын
Wow you are something else 👍👍
@3o_p2 жыл бұрын
Looks so cool 😍😭😭 love it 👍🏼😍🔥🔥🔥🔥🔥
@DefineReality20233 жыл бұрын
Two questions: 1) Did you glue each fiber optic from the back of the headliner so that the final fibers got get pulled back into the roof liner? 2) How long did it take from start to finish for this 1000 fiber strand project? Thanks
@adriannimani2353 жыл бұрын
Sieht top aus! Wie viele Fasern hast du für die helleren Punkte durch das Loch gesteckt? Und kannst du das Licht noch dimmen?
@StoneTechReview3 жыл бұрын
Ja das Licht ist dimmbar (bis es fast aus ist - schätze ca. 10 Stufen) Durch das selbe Loch habe ich nie mehrere gesteckt. Ich habe einfach mehre Löcher in einem kleineren Bereich gebohrt. Dass die Lichter unterschiedlich hell sind, ist dank dem "Twinkle" Effekt. Dadurch werden manche Glasfasern verschieden hell beleuchtet.
@rmarg15e843 жыл бұрын
So the left over wire can be cut without damaging it ??
@kittshausman61913 жыл бұрын
A lot of work. But turn out. So nicely
@varshan06454 жыл бұрын
great job man ..planning to install this soon
@lettuce96123 жыл бұрын
So how did it go?
@varshan06453 жыл бұрын
@@lettuce9612 well it works great but fiber optics has a lifespan though. The more heat there is the more cracks the fiber optics get and then the amount of light passing through the fiber optics reduces overtime . Probably should have installed some kind of heat protection sticker on the roof of the car before installing
@lettuce96123 жыл бұрын
@@varshan0645 what kind of heat sticker would you recommend?
@akshaytilawane90683 жыл бұрын
Wow, it's really awesome. 😍 is it a available in India??🤔 please provide buy link.🙏
@capthelightman3 жыл бұрын
its a lot of work but well worth it
@NEMPLS2 жыл бұрын
What are the screws with the clear jewels for? I see them in a ton of videos but nobody says what they are for.
@snvffxxx3 жыл бұрын
who needs a galaxy inside his car?
@gopalkantariya27792 жыл бұрын
where did you place the module(light emitter)?
@LINESTELECOMCORDEDTELEPHONES3 жыл бұрын
ആദ്യമായിട്ടാ കാണുന്നത്👍 I'm seeing this item first time
@shamsheersha48773 жыл бұрын
Hello
@AJ12Gamer10 ай бұрын
Do you think 1000 is enough or too much for your car? How much do you think a sedan headliner should have?
@abdulsatarqaderzada4 жыл бұрын
Could you make The video about full installion. How to remove car indie roof panel, how to FIX Power and then how out roof back
@StoneTechReview3 жыл бұрын
This will most like be different in every car. This is why i did not show. Also installing Power is just plugging into Car Power Outlet (car lighter socket). Since i wanted a cleaner and more permament solution, i just cut the wire and connected to my car lighter socket from the back. Just solder to + and - cable.
@pankushparashar273 жыл бұрын
Do u have a link to the lights??
@bunsoali59103 жыл бұрын
Good idea 💡
@hellomama20203 жыл бұрын
Wow magnifique
@riazayoub88823 жыл бұрын
Very nice brother
@rajatawari12013 жыл бұрын
😍😍😍😍 awesome yarr🔥
@jettjones6012 Жыл бұрын
Where are you getting power for the star lights bc you seem to be light them up from a outlet in your trunck
@menteses1232 жыл бұрын
AMAZING!!!!!!!!!!!!
@pravendrkumar13433 жыл бұрын
Amazing Technology 😲😲
@fernandosanchez23493 жыл бұрын
Is old
@stephanogodoy15733 жыл бұрын
Where do you put the metal thing ?
@legendabhiyt96243 жыл бұрын
It's look really good
@StoneTechReview3 жыл бұрын
Thank you
@devilray09cub3 жыл бұрын
Very nice.. I'm guessing that takes a VERY long time to install
@StoneTechReview3 жыл бұрын
Thank you. It took me 2 full days.
@CarLoverPhotography3 жыл бұрын
Thats awesome what length of fibre is that?
@StoneTechReview3 жыл бұрын
Thank you, the lenght of my fibres are 5 Meters
@Rjskillindia3 жыл бұрын
बहुत शानदार
@user-nj3tu2kf7x3 жыл бұрын
대박!!!👍👍👍👍
@mister3avid3573 жыл бұрын
Good job
@mariovo5 Жыл бұрын
Looks good in 144p I will get 2 but I want to daisy chain them can you do that?
@frankjustice94082 жыл бұрын
Thanks for sharing
@devanvanderberg73452 жыл бұрын
Can you adjust brightness?
@brownsrvlifecampground93223 жыл бұрын
Nice video 🙏❤️🙏
@dominiquewilliams25593 жыл бұрын
Can you leave link. I need this exact kit
@evie45642 жыл бұрын
I found the link to it I can send it to you if you want-
@NMDZAZAOFFICIAL Жыл бұрын
@@evie4564 yes
@__-pl3jg2 жыл бұрын
They're twinkling waaaay too fast. Does it allow you to slow it down?
@0togtr8113 жыл бұрын
It's sad that the person who made this video can't speak. I hope one day God blesses you with a voice then you can't speak in the videos you make.
@StoneTechReview3 жыл бұрын
I think the person who wrote this comment is talking about me :D
@factchristo65503 жыл бұрын
It's not a movie to tell some story... Do u need subtitles too..for this vdo.. ok the I'll tell connect projector to power cable, then place fibres in drilled holes., Then connect fiber cables with projector light.. then cut the remain fiber cable...
@0togtr8113 жыл бұрын
@@factchristo6550 you seriously have a major problem in life.
@factchristo65503 жыл бұрын
@@0togtr811 I don't know whether u r telling real or not. I think u r criticising that person .. bcoz he never talked... So that I harshly commented to support that person.
@hogflies32083 жыл бұрын
@@factchristo6550 you have a major malfunction. All the comment was trying to was nice, which is exactly the opposite of what you were going for. Absolutely arrogant and inconsiderate.
@emrecaliskan64283 жыл бұрын
Hast du immer pro loch eine Faser gesteckt oder bei manchen 2,3 ?
@winflyled42813 жыл бұрын
Amazing
@coolme2416 ай бұрын
My thing is will you see the hole in the day time or will it look like there is nothing there ?
@syedakifshah3 жыл бұрын
Always maintain extreme dark inside car to have clear visibilty outside in night. Drive safe, keep less distortion.
@StoneTechReview3 жыл бұрын
Yes you can keep off during driving, but you can also turn down the light, so you barley notice it. Normal use it is not more intrusive than ambient light of Audi BMW or Mercedes.
@dymondqueen15843 жыл бұрын
I want to do this to my car but do I have to remove the upper part of my car??
@iloveshylee4 жыл бұрын
Is there a way to slow down the movement of the lights?
@StoneTechReview4 жыл бұрын
Yes, Motor Speed (Twinkle Speed) can be adjusted with remote or App
@SalemMillion3 жыл бұрын
@@StoneTechReview You can dim them right ?
@StoneTechReview3 жыл бұрын
@@SalemMillion Yes, lights can be dimmed (around 10 Steps until near darkness). You can see on remote at 0:09 the top left buttons. "Sun Arrow up" and "Sun Arrow down"
@hungry91513 жыл бұрын
I love you❤️
@Furkanabi613 жыл бұрын
Hast du die kabel an den Dachhimmel befestigt bzw geklebt wie andere es tun oder einfach den Himmel wieder dran gemacht
@tarnvirdhaliwal52073 жыл бұрын
Do you have link to product in video ? It looks so good
@StoneTechReview3 жыл бұрын
amzn.to/2T5DecG
@satishjha66223 жыл бұрын
Bro we do this it's called optic fibre star lighting if you want to do this lighting message me
@fabiodadone32493 жыл бұрын
cool video! I just want to know where you hide the box and how do you connect it to the battery, thak you very much!!
@StoneTechReview3 жыл бұрын
I took of the Plasik covers of my D-Pillar and went down in my trunk. [On the left side (and also right side) i have a storage compartment for First Aid, and other stuff]. I rolled the rest of the fibers so they would fit in there, used two cable ties and put the Light/Motor also in there. You can barely see the compartment at 2:34 on the left side. This is problably different for each car. But the Star Light set i bought from the brand Chinly had a lot of cable lenght, so i could have easily went further in the trunk (for eample in the spare tire region).
@StoneTechReview3 жыл бұрын
For Power Connection you can just plug into Car Power Outlet (car lighter socket). Since i wanted a cleaner and more permament solution, i just cut the wire and connected to my car lighter socket from the back. Just solder to + and - cable. (My car had a Car Power Outlet in the trunk right next to the compartment where the Lightmotor now is).
@sinusinu25343 жыл бұрын
Super
@ishrana31713 жыл бұрын
Mast h bhai
@santhoshhp75632 жыл бұрын
Is it possible for convertible cars also ? Like BMW Z4 ?
@hamzamushtaq6043 жыл бұрын
Where did u put the projector?
@Engineering.Aluminum.Company3 жыл бұрын
Wow!
@muktiyarahamedf.r70243 жыл бұрын
Beautiful What is music name.
@StoneTechReview3 жыл бұрын
The Song is from KZbin Creator Studio. It's called "Yard Sale" by Silent Partner
@cklboy31773 жыл бұрын
Wow... 😍
@jafer_malik15933 жыл бұрын
Bro I want this ❤️👍👍
@gen4iktm7753 жыл бұрын
Мне кажется что это лучше чем в ролсройсе
@Forget949vr3 жыл бұрын
Одним словом -Просто Космос
@liambond4933 жыл бұрын
did anyone else think that this guy had an led water fountain going in the back of his car when they saw the thumbnail or is it just me?
@StoneTechReview3 жыл бұрын
:D love it
@fluffymacaw9333 жыл бұрын
I used to think these were live wires when I was little
@premayyappakumarkollu56093 жыл бұрын
Excellent
@StoneTechReview3 жыл бұрын
Thanks
@AmchiMumbai.3 жыл бұрын
NICE
@larsschroder33753 жыл бұрын
Ist es denn sicher wenn ich das Gerät an 12V anschließe ? Wird das Kabel nicht zu heiß ? Hammer Video 👍🏻
@StoneTechReview3 жыл бұрын
Das kannst du leicht checken: Ich habe 2x Zigarettenanzünder im Kofferraum, diese sind zusammen mit einer 20 Ampere Sicherung abgesichert. (Da Hilft die Bedienungsanleitung deines Autos zum Sicherungskasten). Vom Netzteil @0:31 abgelesen, sieht man, dass das Gerät maximal 3A braucht. Somit kann man sagen, dass die Kabel im Auto das leicht aushalten, sonst hätte der Autohersteller da keine 20A Sicherung verbaut. Jetzt sollte man natürlich nicht zu dünne Kabel verwenden, wenn man vom Zigarettenanzünder zum Lichtmotor geht. Generell kann man auch einfach das Netzteil aufmachen und den Holstecker mit Kabel auslöten / oder einfach abschneiden und dieses Kabel verwenden, denn dass hält die 3A auch aus. Ich hoffe das hilft dir und allen anderen, die sich das gefragt haben! Beste Grüße und Danke für den Kommentar!
@Shedowplaygames3 жыл бұрын
Hey wie hast du es geschafft den Sternenhimmel eines "bestimmten" Tages auf das Dach zu projizieren? Ich meine hast du eine App oder eine Internetseite, wo du ein bestimmtes Datum eingeben kannst und dort dann der sternenhimmel des Tages gezeigt wird?
@StoneTechReview3 жыл бұрын
Das ging nur mit etwas Umwegen: 1. bin ich auf die Seite: www.meinfoto.de/configurator-starmap.jsf?product=2240&new 2. Datum und Ort eingeben 3. Sternbilder "aus" und Bild auf "Schwarz" stellen 4. das Bild mit STRG + Scrollrad vergrößern und per Screenshot speichern 5. Das erstelle Screenshot-Bild in Vollbild mit Beamer auf den Dachhimmel projizieren und die Sterne mit Edding markieren. Hoffe das hilft :)
@namedchevy3 жыл бұрын
What did you use to glue them in place?
@StoneTechReview3 жыл бұрын
I did not glue it and it still holds quite good. I have seen/read about people using Sprayglue or Hotglue. Sprayglue is probably the faster method than using Hotglue on each Fiber.
@saleempk98123 жыл бұрын
അടിപൊളി.. എനിക്കും എന്റെ കാറിൽ ഇൻസ്റ്റാൾ ചെയ്യണം... 💚💚💚💚
@snd90663 жыл бұрын
enikkkum
@zfarali3 жыл бұрын
I saw this in my childhood. What s new in this
@bugnugget25163 жыл бұрын
Hi, sieht Klasse aus. Kann man auch unterschiedliche Farben einstellen also eine Farbkombination? Oder leuchtet der Himmel stets in einer Farbe?
@StoneTechReview3 жыл бұрын
Danke! Also man kann einen Farbwechsel anmachen, sodass die Farben von einer zu anderen sanft wechseln. Das bedeutet aber, stoppt man an einer stelle, hat man immer nur eine Farbe. Mit meinem Set ist es also nicht möglich, dass gleichzeitig einige "Sterne" Gelb und die anderen Blau leuchten. Falls du so ein Set findest kannst du ja mal ein Link posten, vielleicht interessiert das andere genauso :)
@bugnugget25163 жыл бұрын
@@StoneTechReview Wechslen die Farben denn sofort oder ist zwischen den einzelnen Glasfasern ein Verzug? Bei manchen Video sieht es so aus als würden nicht alle sofort die gleiche Farbe haben. Ich habe eins mit Dual Output gefunden, jedoch auch nur einfarbig.
@bugnugget25163 жыл бұрын
*push*
@StoneTechReview3 жыл бұрын
@@bugnugget2516 Sorry für die verspätete Antwort. Nein also bei meinem gibt es keinen "Verzug". Es leuchtet wirklich immer nur eine Farbe.
@eliasbauernschmitt40453 жыл бұрын
@@bugnugget2516 Hey, ich habe bis jetzt auch noch keines gefunden, bei dem man mehrere Farben gleichzeitig einstellen kann. Eine einfache Möglichkeit wäre jedoch, zwei oder mehrere Engines gleichzeitig zu verwenden und die Fasern durcheinander einzubauen. Hier ( kzbin.info/www/bejne/boinhmuvfb2opM0 ) sind es z.B. 3 Engines gleichzeitig.
@georgegraham19953 жыл бұрын
What tool are you using to cut the lights?
@StoneTechReview3 жыл бұрын
I am using pincers (German: Kantenzange) But it can also be cut with normal wire cutters
@hawglee66233 жыл бұрын
Must not have a job, to much time on your hands. But vary awesome indeed 😎
@StoneTechReview3 жыл бұрын
Took me 2 days to install. Yes, it's a lot of work but can be done on a weekend.
@shakeelchoudry2423 жыл бұрын
What size drill bit did you use, have you got a link?
@StoneTechReview3 жыл бұрын
Hole size is 0,8mm for 0,75 mm fiber. You can see Drill Information @0:25 I do not have a link (my drills were included in package). But i am certain you can find these Drill sizes local or online.
@malondsouza48313 жыл бұрын
Can you put this light in crate and what will be the cost
@ahsanwali83803 жыл бұрын
Bhai ye eyes k liye harmful hota h kya please answer mujhe lagwana h, mai Lucknow se hu, mujhe kaha mil skta h
@adeeshpandey95452 жыл бұрын
Which car do you use ? How many strands would you recommend for hyundai i10 car..?
@gopalkantariya27792 жыл бұрын
400 more than enough.
@snd90663 жыл бұрын
does this work with a car with panaromic sun roof
@sajtheone3 жыл бұрын
Can the twinkle be slowed down?
@pawangoswami31763 жыл бұрын
Nice bro kitni ret lagti h
@kangkanboro12883 жыл бұрын
Roll royal felling 😆👍👍
@crismtz28182 жыл бұрын
Why mark where you going to drill them??
@kurosaki93633 жыл бұрын
I don't understand what you did. How are those bits left in roof light if you cut that many ties?
@eliasbauernschmitt40453 жыл бұрын
You of course have to glue them in place from the hidden side.
@g0lfg0d403 жыл бұрын
What’s the name of the tool you were cutting with?
@StoneTechReview3 жыл бұрын
I am using pincers (German: Kantenzange) But it can also be cut with normal wire cutters
@lifeisbeautiful45982 жыл бұрын
What kind of light is used led or laser ?
@malondsouza48313 жыл бұрын
What is the price and were do you stay
@tuvanxe2473 жыл бұрын
I like
@luissr60753 жыл бұрын
We’re did you buy the lights
@timurb.81633 жыл бұрын
Wo hast du das Gerät versteckt? War zwischen der Verkleidung oben Platz oder hast du es im Kofferraum hinter die Verkleidung gepackt?
@StoneTechReview3 жыл бұрын
Ich habe den Lichtfaserstrang hinter der Verkleidung der linken D Säule in meinen Kofferraum laufen lassen. Die Fasern hinter der Verkleidung laufen zu lassen war bei mir kein Problem, da war immer genug Platz. Unter meiner D-Säle habe ich relativ viel Verkleidung und ein großes Fach für erste Hilfe, Warndreieck und Warnwesten. Das Fach selber sieht man im Video leider nicht. Jedoch kann man bei @2:34 links und rechts die beiden Fächer erahnen. Die restlichen Glasfasern habe ich mit Kabelbinder zusammengerollt und alles zusammen in dieses Fach gelegt - ist damit alles super verstaut. Wäre dieses Fach nicht da gewesen, hätte ich mit den 5 Meter aber auch noch genug Länge gehabt um komplett in den Kofferraum zu gehen. Z.B. zum Reserverad. Hoffe das Hilft. Beste Grüße
@timurb.81633 жыл бұрын
@@StoneTechReview danke kann ja berichten wie es bei meinem Golf 7 ausgeht :)
@erwin4113 жыл бұрын
Bright where did you put the box?.. where the light coming out??
@StoneTechReview3 жыл бұрын
I took of the Plasik covers of my D-Pillar and went down in my trunk. On the left side (and also right side) i have a storage compartment for First Aid, and other stuff. I rolled the rest of the fibers so they would fit in there, used two cable ties and put the Light/Motor also in there. You can barely see the compartment at 2:34 on the left side. This is problably different for each car. But the Star Light set i bought from the brand Chinly had a lot of cable lenght, so i could have easily went further in the trunk (for eample in the spare tire region).
@erwin4113 жыл бұрын
@@StoneTechReview thanks man..
@bazintrickways30455 ай бұрын
Can you do this in your bathroom?
@rahulgalande95253 жыл бұрын
sir where get this?? my room is 10X 10 ...wts cost
@seyhapich30974 жыл бұрын
Does this have a music mode? If so how well does it work?
@StoneTechReview3 жыл бұрын
Yes this also has Music Mode. It will listen with Microphone and change light according to Music/Beat. Works ok but i do not like it too much, since it will "flash". I like twinkle effect way more.
@vishnur81513 жыл бұрын
ცrơ ơrɖɛr Ɩıŋƙ ʂɛŋɖ bro
@leonkurto3 жыл бұрын
Does anyone know if it'll be back in stock?
@sinuemedina25503 жыл бұрын
Where did you buy it
@kapilbiswas14753 жыл бұрын
Amazon showing its only fiber... What about the driver ( light machine).! 🤔 Where I can buy it
@StoneTechReview3 жыл бұрын
This is whole set: amzn.to/2T5DecG Driver + 1000 Pcs Fibers. I bought it from there.
@rkyaroboy31163 жыл бұрын
Super hair lite
@Sniperssx3 жыл бұрын
can share product details that from where can be ordereded thanks