How to Install a starlight headliner in 2023

This is the Ultimate Guide to installing your starlight headliner. I’ve scoured every KZbin video on “HOW TO INSTALL A STARLIGHT HEADLINER”. I’ve read through all the comments of each video, and compiled a list of FAQ’s everyone wants to know... and Answered them.
*** Amazon Product Links Below ***
(NOTE optional items below: 19pc trim removal, 447pc replacement clips, nippers)
LED Fiber Optic Light Engine:
amzn.to/2Yibmaz
5pc Trim & Panel Removal Tool Kit:
amzn.to/3BCbzUt
19pc Trim & Panel Removal Tool Kit:
amzn.to/3kIa7J5
447pc Fastener,Rivet,Clip Replacement Kit:
amzn.to/38tI8aq
Upholstery Pin:
amzn.to/3jzuZ69
Gorilla Clear Glue:
amzn.to/38vY5gl
Fuse Tap:
amzn.to/3zDwTIi
Channellock Nippers (to cut fibers flush):
amzn.to/3gSA33M
14 Gauge Copper Wire:
amzn.to/2YcfIQl
Uni-Paint PX-20 Oil-Based Paint Marker: amzn.to/3DBt9tg
Remote Battery (not included) CR2025:
amzn.to/3t6GKnD
NOTE: I did not show my headliner removal because Of time restrictions - Although every headliner removal is a little different, for the most part, it’s almost the same process for all cars. There are videos of this on KZbin***
00:00 - 14:00 min - all products used and review.
14:00 - Overview of dropped headliner
16:10 - Prepping before installing fibers
17:30 - Map your headliner stars
18:28 - The simple strategy making holes
19:50 - How to run the fibers to the trunk
21:50 - Running the power cord brainstorm
22:48 - Night testing lights before installing
24:10 - Finished product ready for reinstall
29:00 - Headliner installed, finishing up
31:25 - Final thoughts and answering FAQ’s
31:35 - How did I power the light engine
32:25 - Turn on with dome lights diagram
34:20 - Shopping fiber sizes lengths & widths
37:20 - How long did it take
39:05 - Can you see the fibers during the day
39:45 - Can you feel the fibers
41:30 - Does this affect the headliner lifespan
42:55 - Would I do this again
43:45 - Proper handling of your fiber optics
46:00 - How much did materials cost ($200)
47:00 - Demonstration of finished product
50:15 - Is it worth it? Final Thoughts.
51:00 - Don’t forget the trim removal tool
53:08 - Daylight demonstration
Contact: [e-mail]
👀 FOLLOW ME HERE!
✅ Facebook - / reynaldo.velasquez.378
✅ Instagram - / reynaldovelasquezjr
✅ Tiktok - / reynaldovelasquezjr

[@5444067]

I’m only 7 years old and I want to do this to my future car!!! Thank you 😊

[@Konradoki]

Your dreams will definitely come true little man!

[@ReynaldoVelasquez]

Awesome! I can’t wait to see your results!

[@wilsoncedeno741]

@@Konradoki this is so great young man you defitnely will do it

[@Jay-qx4po]

Hes 7 but his acct is 9 years old 😂

[@kedarreiskirkendoll139]

@@Jay-qx4po maybe it's his parent's and he uses it

[@wolfiefx6690]

this is actually an amazing tutorial, went through everything and provided time stamps and links, might be the best tutorial I've ever watched

[@ReynaldoVelasquez]

WolfieFX thank you. I watch it now and I realize just how much more I could have shown. I was just in a time crunch with the kids. I would do it again but it’s just so time consuming, I don’t know if i actually want to do it again

[@carlosnoelalcala4320]

I agree!

[@donaldtrumpismypresident1132]

@@ReynaldoVelasquez hello from germany. can you tell me how much is the price of this fiberglas setup?

[@dboyq329]

@@donaldtrumpismypresident1132 Oh F/U! Just saw that Trump is your president! Figure it out for yourself stupid ass!

[@alanjuza6902]

Seriously this guy is goated

[@campaignslayer]

The fact this man did the whole project with the headliner in the car deserves a standing ovation. Well done sir!

[@ReynaldoVelasquez]

Thank you. I just had to make it work with what i had. I do wish I could have removed it without having to remove the backseats, center console, etc.

[@MethmalDhananjaya]

You sir. you earned my respect. cheers.

[@ReynaldoVelasquez]

Methmal dhananjaya thank you! That means a lot!

[@stewbeats3171]

Finally someone who made a correct video on how to install these the proper way, Clean and long-lasting, and not using any car outlets

[@ReynaldoVelasquez]

The LoganStew thank you

[@DeathGroup]

I thought he used the 12v

[@dwaynelewis7809]

@@ReynaldoVelasquez did u use the 12v

[@ReynaldoVelasquez]

@@dwaynelewis7809 for the first year or two, I just used the 12v power socket in the back seat. But now I just hard wired it. And uploaded the video for how to

[@dwaynelewis7809]

@@ReynaldoVelasquez ok kool thanks man

[@Epsonblade]

I have worked in the auto industry for decades. After I left for military, I no longer worked for dealers, but part time worked at stereo shop. We have done this on many cars. But your kit seems way better than the stuff our customers had us use. I am not so much into the looks stuff with cars, maybe some carbon trim and outside spoilers etc.. But for how much you spent on materials, the cost is low for this feature. You did a good job buddy! I wouldn't do this to my cars, I make them fast, and I make them all performance oriented. But for show car folks this is pretty cool. Did you know that Rolls Royce charges $12,000 for this feature in their cars? I thought you'd appreciate that... Good work, I bet the wife and kiddos love it.

[@erichobson9753]

Such a detailed tutorial, you did very well with this and it’s been extremely helpfully with my own project. Much appreciated

[@taylortrivett1836]

This is the best most in depth video of anything I’ve ever found lol. Thanks so much for this. With this video I feed I can confidently do this to my truck!!

[@susannnaa]

Thank you sm please never delete this video

[@fdk9365]

Holy i underestimated how tricky it is too keep it from becoming a birds nest, yours look so much cleaner and well laid out

[@ReynaldoVelasquez]

Did yours get all tangled out? I’ve never heard of that before. That’s one reason I started at one end and ended on the end where the fibers were being run. Wow, what happened? Is everything okay?

[@michaelkrais1446]

Great job and a wonderful explanation of the how's and why's of what was going through your head. I loved it

[@mr_scarlett7189]

Great job Rey, this is my second time watching this vid, im motivated to do this install, ill probably tackle this project in the fall..looks great

[@ReynaldoVelasquez]

Rude Boy do it! I can’t wait to see what you come up with. And if you learn some tips and tricks make sure to share them here

[@kontrakgaming4107]

Thank you for this. The best install video yet!! I love how you detail literally everything that goes into this and how your going to wire it. Awesome

[@ReynaldoVelasquez]

Thanks! The writing video is live and uploaded already

[@SuPeRCIViC619]

Amazing video from start to finish. Great tutorial. Very detailed, great instructions/camera mounting. Ever since I saw twinkling lights in a Rolls Royce, I always wanted to do something like this. Thinking about doing this in my 2020 Civic SI. Thanks again!

[@ReynaldoVelasquez]

Totally do it! I want to see the finished product

[@johnmora5830]

I've had this idea for years really cool see people do it

[@leewells2450]

Amazing work and explanation of the whole process. Great job.

[@j91632]

That was an excellent tutorial, question and answer and wonderful results. I love the look and before the ending I was dead set on NOT taking the time or effort, even though the outcome was beautiful, to do this to my car. However, you've completely changed my mind, thanks 😉 👍🏽.

[@vanessaa4137]

you think this would work on a acura vigor ?

[@Tazyz]

You took your time best video tutorial 👌. KZbin needs to give you something for this video

[@notsofast2325]

Great job. !! I know it took a lot of patients. I had this done to my lincoln 120 stretch limousine. Now i know how to do this. i hope to do this to my denali one day. thanks for your efforts.

[@scottroddenberry2579]

Reynaldo...You have done an excellent job on this video..I will.be looking for anything else you post.your commentary is perfect and your editing in all the supplies and steps.is awesome..I enjoyed your tutorial you should consider being a full time reviewer.

[@karatejujutsukid8066]

This is the BEST how-to video on installing headliner lights 👍🏼👍🏼 two thumbs up. Thinking about doing this to my Z

[@ReynaldoVelasquez]

Karate Jujutsu Kid thank you! That is the biggest compliment to give! And to think I just did this as a hobby Video... to create a video I wish I had

[@MikeTheGreatOne99]

...you did a really good job, bro. Props!

[@jinnsane6712]

Literally the perfect video

[@terrenceclark3213]

This was fantastic and thank you very much for showing step by step how you did it. It looks amazing and very professional. I know can do it myself! Thanks again!

[@ReynaldoVelasquez]

You’re welcome. I hope you have a successful installation

[@bdby13jr]

Thank you for such an in depth break down from all aspects! Here I am 3+ years later watching & now on the verge of doing this mod and breathing some life back into my Chrysler 300. Appreciate it bro!!! 👍

[@ReynaldoVelasquez]

Yessss those Chrysler 300’s look great with the headliner

[@playmakachico9502]

I salute you, Bro! I would have gave up as soon as I saw the black plastics! 🤣🤣🤣

[@ReynaldoVelasquez]

You got this bro!

[@AshwinLB]

Once I figure out where to put the light engine, I’m ordering this!! Best video I’ve seen so far👍🏽

[@ReynaldoVelasquez]

AshwinLB hey thanks, I’ll be making a dedicated channel for this project here soon.

[@eclectic3618]

That is such a great project, your trouble shooting skills and patience are admirable most definitely. The result definitely worth the frustrations you must have went through to pull it off.

[@ReynaldoVelasquez]

ECLECTIC 361 thank you, yeah it was a lot of labor for sure, but I do love riding around in that car. It’s a fun car to drive for sure

[@svtdiablo7673]

Kept reading all these great reviews went ahead and watched the video and let me tell you.. great job man

[@ReynaldoVelasquez]

Thank you! And welcome to the channel

[@kwbalance108]

My dude, THANK YOU for taking the time out of your day to post all of this!

[@ReynaldoVelasquez]

I did it just for you buddy.... just for you lol haha thank you for the comment

[@kwbalance108]

@@ReynaldoVelasquez Lmao xD Subbed to both your channels as well!

[@Lornado]

You deserve more credit. Very in depth and helpful video! Will be coming to the comments if I have any questions!! Good job!

[@ReynaldoVelasquez]

Thank you so very much

[@SurfSk8Snow100]

Awesome !! I’m going to have to rewatch all over again when I get my lights 🔥

[@ReynaldoVelasquez]

Doooo itttttt! Let me know the results!

[@creepinggamers02]

I just did this yesterday thanks to you and it came out amazing thanks for the motivation to do it man!

[@unknownman1035]

Was it hard to do yourself?

[@griffensackman8383]

I usually don’t comment on videos but damn this video is good quality information and made it easy to understand

[@ReynaldoVelasquez]

Well thank you! That really means the world to me! Thank you 🙏

[@mrang5071]

it really fits in well with the black headliner! great job!

[@ReynaldoVelasquez]

Mr Ang thank you

[@ShotgunAndAShovel]

this is a perfect real life diy video. ty.

[@kiiyannahudson]

I applaud you. That's a lot of work. I changed my mind on doing it myself

[@cozmo2727]

Im saying! Let me go ahead and pay this $500 🥴

[@dwaynelewis7809]

@@cozmo2727 yours only $500 while mines will be $900 lol.

[@zeus2227]

@@dwaynelewis7809 yours 900 mines gonna be 1250 if someone installs it for me :(

[@dwaynelewis7809]

@@zeus2227 damn

[@dwaynelewis7809]

@@zeus2227 do you have a car are a suv ? 🤔

[@A.Wild.Yamster]

Not Gonna cap and say I watched the whole thing but I just wanted to comment and tell you that the video was very well put together.

[@bennyk7297]

I did watch the full thing and I can second this comment.

[@ReynaldoVelasquez]

Thank you I appreciate that small gesture

[@WillPemble]

Nicely done! Such a beautiful effect. :)

[@cameroneshleman4833]

Thanks man this is gonna take my Tundra build to another level

[@mjr11]

A little long winded some times but by far the most informative video out there! Thanks a lot for all your hard work! I cant wait to start on mine, i accidentally ordered the one that doesn't twinkle lol so now i have to wait until Monday.

[@ReynaldoVelasquez]

Michael Riley aww man! That sucks, yeah no worries keep us all updated with your mod too

[@yessidolemerchant5143]

15:45 aw he's got the kid in the other arm lol 10/10 dad

[@ReynaldoVelasquez]

Thank you! That means the world to me. I really did do this while watching my two sons.

[@geraldfiorello6231]

Man that looks awesome

[@legionluciano]

Very nice job, man. Thanks for sharing.

[@mylifezach]

I am subscriber 500 congratulations man keep up the good work appreciate the knowledge

[@carolyncantu3217]

When I’m sitting in your car taking selfie’s with the lights I don’t realize how much work, and patience went into bringing it to life!! It looks even better in real life !!! 🙌🏻🙌🏻

[@ReynaldoVelasquez]

Hey Lynn! Look at you in my comments section! Well I’m glad you like them, I personally like to record my Facebook stories in my car and it always adds a cool look. People always think it’s a Snapchat filter in the background

[@carolyncantu3217]

@@ReynaldoVelasquez I know I love your car! It does look like a filter ! I’m gonna make you do it on my fiat 🤣🤣🤣🤣

[@eatmoreeats9566]

such an excellent detailed video. salute !

[@mekalee6347]

Awesome tutorial bud!! I will be working on mine in my 2022 1320 Scat this weekend! I’m so excited! ❤️❤️😍🥰

[@fastman147nguyen5]

This is completely wonderful work of yours bro. Appreciated!!!!!

[@ReynaldoVelasquez]

UPDATE: the wiring video is now uploaded. To contact me, email: [e-mail] ** Hey everyone! The wiring video is coming soon very very soon. Thank you for being patient. It’ll be well worth it! : UPDATE: the writing video is live and uploaded

[@Jrivera076]

Yheaa! I've been waiting for the video! 👍

[@Jrivera076]

Reynaldo any way I can contact you? I'm going to try to do this on a sport ram I'll like to have your help and advices!! Thank you!!

[@ReynaldoVelasquez]

Jenderson rivera Hi, you can reach me at my email and then maybe be can exchange phone numbers to text. Reynaldovelasquez85 @gmail.com

[@ReynaldoVelasquez]

Jenderson rivera thank you, I’ve been wanting to give an update myself, I’ve encountered a few setbacks that will be explained in the next video

[@hassanmohd7675]

Is it to come?

[@Dkamek123]

Excellent, detailed information. This video deserves an award! Masterclass!! 👍🏾👍🏾

[@ReynaldoVelasquez]

Thank you so so much! I’m glad it helped you out

[@CarlosReyes_CR]

the best video on how to install✌🏽

[@carlos889574]

Thanks for the video bro I wish you can show the updated wiring you did for the power but I will try this once I change my headliner to a black suede. Earned a sub from me mane. I also agree that a lot of people on youtube that did this, never really explain the wiring power. Thanks again for the video bro.

[@ReynaldoVelasquez]

Carlos88 hi thanks, I had my KZbin notifications turned off, and I didn’t realize that it would also turn off my comment alerts. I will upload a wiring video just for you very soon. Give me about a week. And if you have any questions just ask away. I’ll be uploading more frequently in the next few weeks. Let us know how yours comes out, and any other tips and trick you learn along the way

[@carlos889574]

Reynaldo Velasquez yes I’d really love a video of the wiring step by step and tools you used ya know? I will update you once i get everything I need, I’ll start the installation. Can’t wait for the video bro, I’ll be waiting.

[@markiefufu]

Not sure how I ended up here, but I love this idea! I have T-Tops, so might not have much of an effect for me.

[@itsnotlanden363]

Thanks for the video man. Mine come in tomorrow. Keep it up.💪🏼🖤

[@stoddy2005]

Great video, loved the end product

[@JayyDoodle]

Just got finished installing this in my 2016 Sonata and this video helped me out a ton, so thanks a bunch! I bought pretty much everything on your tool list. The gorilla glue worked like a charm, and the trim removal replacement kit came in handy for a few retainer clips that I broke while removing the pillars. I ran into the same issue of not being able to get my headliner out of the car so I also had to work inside, incredibly tedious work! I ended up routing the cable up the B pillar like you considered doing, as in my car you are unable to reach the trunk from anywhere in the passenger compartment. I'll add a bit of advice for anyone that may be watching this video - DON'T buy the light kit with multiple sizes! Especially if you have a light colored roof like my own (tan). The largest of the strands left pretty noticeable holes in my headliner, much larger than I anticipated. It looks pretty awful during the day, though at night you can't tell the difference. I'm considering going back in and wrapping my headliner in black like others have done and then pushing the strands through the new fabric - we'll see

[@ReynaldoVelasquez]

JayyDoodle awesome! I’m glad i was able to help out a bit. I wish I had a second camera guy just for recording. Did you get to document your process? Upload a video I would love to check it out. I got all the same size strands because it came with MORE. And one of my buddies told me with the twinkle effect, some will naturally look bigger and brighter than the others. So for me there really was no need to go bigger. But that’s a great tip, thanks for sharing about the hole sizes. How long would you say it took you to complete with breaks included? Make sure to give us an update.

[@jacobcoleman9756]

JayyDoodle I have a 2011 sonata and I really want to do it

[@awat5818]

Do you have a video or pictures? I want to do this in a Sonata

[@cmarino7462]

im trynna do this in my sonata, do you have a video of how it looks.

[@sebastianpadilla1130]

LITERALLY SAME, thinking of going back and doing black suede but wouldn’t it be hard to remove the fiber optics since they’re glued down? will it ruin them?

[@ReynaldoVelasquez]

I can’t seem to access the comment, or maybe they deleted it earlier this week. But someone asked me if they would be okay doing this for a convertible top. And my answer is NO. The fibers will get bent, broken, become loose eventually and it will just become a mess. But... if anyone does try it out and succeeds without making the roof leak on them or whatever... please share the info with the group! We’re all here to learn from each other

[@osswalddo9743]

How has your light engine held up? a lot of people say to go with the chinly but the bang for your buck on your personal kit is greater.

[@ReynaldoVelasquez]

Oswaldo Mancilla in the video I show how I ran it, basically the light engine is just help in the trunk in a little netting that came with the car to store the lugnuts and assorted things

[@MarioMartinez-kl1rq]

by far the best video for this install ive seen, super informative. thank you i think im confident enough to tackles this now

[@ReynaldoVelasquez]

I’m glad that you can tackle this project now

[@curtisbutler2169]

This is the best video 👍👍 thanks for all the information.

[@gabehill8062]

Dude amazing tutorial and amazingly put together video! You deserve every subscriber you have and even more. I wish you more growth man✊

[@ReynaldoVelasquez]

Gabe Hill thank you so much! That means the world to me

[@gabehill8062]

@@ReynaldoVelasquez no problem at all brotha. Im gonna install this in my 2015 charger thanks too your video. Have a kickass day!

[@MsXGladiator]

These timestamps. Wow! Thx!

[@ReynaldoVelasquez]

MsXGladiator you’re welcome!

[@MsXGladiator]

@@ReynaldoVelasquez Would you reinstall the starlight headliner or was it too much work?

[@ReynaldoVelasquez]

MsXGladiator yeah I would do it again. I wouldn’t want to make a career out of it though. I’m good to install just a few more

[@MsXGladiator]

@@ReynaldoVelasquez Oh cool ok. I'm currently thinking about it. Do you think 800 stars are too much if I still have a glass window in the roof ?. and thank you for the answer. 🙏🏻👍🏻

[@ReynaldoVelasquez]

MsXGladiator I don’t think it’s too much. It’ll look great

[@OODKAV]

Awesome video from start to end 🔥💯👍🏼

[@Iceemelts]

I’m doing mine this weekend. I’m glad I found your video. God bless you. Hopefully mine turns out good and I don’t give up 😂😂

[@gangstalifers-4312]

Did you finish it this weekend 😊

[@hallyleonard3809]

This video was very helpful! I live in a very hot area and I was wondering if the fiber optic pieces would be more prone to melt or conduct heat. Have you had any issue with this? The only reason I ask this, is you mentioned not to use hot glue because they could melt. Wouldn’t another source of heat do the same thing?

[@chadjay828]

No you should be good they are highly durable and the only thing with the hot glue gun as you cannot touch the metal tip of the hot glue gun onto the fiber optic or then it will mess it up but as far as The normal every day heat from outside will not affect the fiber optics I noticed in the video he said it was 100° outside and his Starlite system was still working without a problem not just that but at night the temperature should drop so it should not affect the starlight system

[@Dan-bd4tl]

Thank you, I have a 1985 ramcharger which isn't in the greatest of shape its got rust and 230,000 miles on it but it runs and the headliner is massive so I was kinda thinking this is the greatest thing ever cause ima pull up in the old hunk of steel with a few dents and a little rust and when people look in side there gonna see a rolls Royce headliner in a 85 dodge this is gonna be great😂

[@ReynaldoVelasquez]

I love it! Go do it! Shouldn’t be too bad to remove anything , in that truck! Can’t wait to see people’s reaction when you pull up

[@katiekk9814]

nice vid really clear

[@oscarless_oscar]

Great review, very detailed man! 🤙🏻

[@derpness231]

Any tips on the lights reflecting on the rear view mirror, only problem I have with it at the moment. Can’t see behind me.

[@ReynaldoVelasquez]

Rez C maybe get an automatic self dimming mirror installed. If I look in my mirror I can still see the lights and I also have dark tint in the rear window. But also try dimming your lights

[@Truckerbabe89]

ok you've convinced me i'll pay you to do mine lol

[@naveedmughal5396]

Me too!

[@LordPagliarello]

Great work

[@christianpreciado7811]

Such a detailed video. Thank you!

[@ReynaldoVelasquez]

No, thank you! Lol

[@strawbxerrii875]

I don’t even know why i am watching this right now I cant even get a car right now I still have 4 years

[@ReynaldoVelasquez]

•Strawbxerrii• resistances is futile

[@ShotgunAndAShovel]

to learn when you do!

[@Kurie]

You got this!

[@EbolaSquirrel]

comes quicker than you think.

[@chaos3980]

Hey, quick question are the holes and fiber optic noticeable when turned off in the day time? Thanks a lot for the video!

[@konstantin7912]

I need to know this as well

[@austinpaine6782]

Konstantin same

[@jhubb1]

Oh yeah my friend has This in his truck

[@05NOLIMIT]

Great Job!! Looks Amazing

[@ReynaldoVelasquez]

Thank you! You’re amazing too

[@iclappedurgirl4335]

Best video I’ve seen appreciate the time you took to show the work and your opinions. Hoping to do this soon and rewatching again 🤣

[@ReynaldoVelasquez]

Hey thanks man! I really appreciate you and I’m glad it helped someone out there

[@Article_170]

I have stock black headliner in my car. Do I need to cover it in suede still?

[@ReynaldoVelasquez]

SportsDomination no you’re perfect the way you are. I had stock black headliner with the foam too

[@Article_170]

Reynaldo Velasquez Thank you for your response! Love how-to youtubers that interact with their audience. I will be doing this in my 2013 Cadillac ATS!

[@ReynaldoVelasquez]

SportsDomination I try to, I’m always on youtube almost as much as i am on FB and IG. Can’t promise to do this if I have 30k subscribers and 800 comments but while I still can, I will. Let us know how it turns out and anything new that you’ve learned along the way.

[@ReynaldoVelasquez]

SportsDomination hey dude, lol I meant to press reply and accidentally removed your reply. But let me see if I can remember your questions: 1) will your headliner fit the projector (light engine) on my video I show how I ran the fiber optics into the trunk and store the light engine in the trunk. I did this because of its large size and also because if the light engine ever goes out you can buy a new one a small swap it out without having to drop the entire headliner again. There are others who have purchased a cheaper $30-$60 smaller light engine and packed it into the headliner but those are cheap and don’t twinkle. And some have gone out... probably due to defects, and guess what... now they need to drop the entire headliner again. What a pain. 2) how does it have power? The light engine box came with two plugs that power it. An AC adapter for a wall outlet and a lighter plug for a car. I just used the car lighter plug and ran it between the split foldable rear seats into the backseat car lighter. It powers the lights when I turn on my car.

[@Article_170]

Reynaldo Velasquez Thanks much!!!

[@2012MRMadness]

Have you updated your wiring? Would love to hope on a GoToMeeting or a call and get some more guidance on my project. Do you know anyone that has done a BMW?

[@ReynaldoVelasquez]

Michael Montalvo I don’t know anyone who has done a BMW but there is a guy on KZbin who did one. Email me and I’ll send my number: [e-mail]

[@josephpaniagua5777]

great video, very, very informative!

[@raquelsoto5544]

I greatly appreciate this video!!

[@ReynaldoVelasquez]

Thank you for that comment

[@coleschuhmacher5231]

thank you for going over the glue, hot glue was melting my fibers even with the tip away from them, I will be using the glue that you used now.

[@ReynaldoVelasquez]

You’re welcome! I’m glad I was able to save you some future headaches

[@rickeyracer44]

The 12V cig adapter has a fuse within it. plug it in your light engine and your good to go

[@ReynaldoVelasquez]

Rickey Racer Awesome! Thank you Rickey! I’ll check it out here within the week

[@justinguarino201]

The suede fabric/cloth does have a foam backing, because it’s required in order to add adhesive promoter to the backing of the headliner, otherwise if they did it with plain fabric the adhesive would soak through:) Great video!

[@andrewsmith4848]

Best one I've seen yet. Thank you. Getting ready to install in my Ford F150.

[@ReynaldoVelasquez]

That’s awesome. Can’t wait to hear back from you on how it went

[@roddie_boii8482]

hmmm do u think i (unexperienced have no idea about building & stuff) can make it in my bedroom?

[@ReynaldoVelasquez]

RODDIE_BOII yeah for sure! People do it all the time

[@chadjay828]

Honestly you can do anything you want as long as you put your mind to it as long as you stay focused and take your time I really think you can’t do it without having any experience look all the people that post their videos on KZbin about the starlight headliner system it was their first time also but they put their mind to it and got it done so go ahead and give it a try good luck sorry it was supposed to say I really think you can do it👍

[@swae628]

does this work on any car? i have a 2002 Pontiac grand prix

[@ReynaldoVelasquez]

Shasta Shannon hey! Yeah, that’s the wonderful thing about this project! You can literally do this on a car, with or without a sunroof, truck, SUV! The only thing that may change is the way youll remove your personal headliner. But yeah! I dig it, you should totally do it!

[@chadjay828]

My little Brother has the same exact car as you he went and did it and with his windows tinted it looks bad as hell if you sit in the front seats and tilt your chair back and look up at the ceiling it literally looks like you are staring at stars and outer space

[@teddynkwabi4502]

Informative indeed 🔥🔥🔥

[@theinfamousjunebugg]

Yeah what she said 🤷🏼‍♂️

[@cameronrothwell4630]

Great video!

[@ReynaldoVelasquez]

Thank you so so so much! I mean it

[@cocmaster4474]

How'd it held up, still working properly?

[@ReynaldoVelasquez]

CoC Master held up great and still working as it should. It’s perfect

[@mattmiller9179]

so my battery is in the trunk so can i just wire it to the negative part of the battery or will that kill my battery? please help lol

[@ReynaldoVelasquez]

Matt Miller you should look up some videos on doing wiring. I suppose you could, but obviously look at what other videos say to do. Possibly use a relay and definitely insert a fuse between the battery and the the light engine. But yes I’m sure it would work. I’m not an electrical genius though. Haha so look up wiring led under glow kits etc on KZbin to get the correct advice. And when you do it... make sure to share it with us too

[@chadjay828]

@@ReynaldoVelasquez you beat me to the punch I was going to say the same exact thing but whatever he does he needs to put in an in-line fuse just in case of overheat protection it’ll pop the fuse instead of starting a fire but besides that yes you can run it off the battery in the trunk that is what I’m going to be doing with my Chevy S 10 I have to add a secondary battery because I have an airbag system neon lights for under the truck sound system and this summer we are going to be installing the starlight headliner system but in my case I have to run with a bigger alternator so it can charge both batteries but honestly you made one bad ass video it’s so easy to learn from how easily you made it for everyone else to understand it I just love the way you broke everything down and explained it now I’m just waiting to find the second video you did on wiring it all up thanks for a bad ass DIY VIDEO !!!

[@DK-rp4eg]

Thanks for this. Going to do my Lexus GS next weekend. Just bought everything you had in your comments section. Awesome info, dude. I'll send you an email when mine is completed. Really appreciate this video walk through.

[@Kissimmeebarbershop]

Bro I have a Lexus GS 400 to Ima do it on bro can u send me pics of how yours turned out?? 3213150908

[@nathanhoxie523]

How did it work out?

[@richardfisher1775]

Thanks brother 🙏💙super dope. I love it. I'm going to do it to my BMW.

[@rx8dude907]

I'm only 5 years old and I will do this to my fisher price foot car.

[@ReynaldoVelasquez]

The world is your oyster 🦪

[@jdrs4214]

Are those fiber optic strands resistant to the sun’s heat??? Are you gonna have a hard time removing it, should the fabric ever deteriorate, and start draping over your head??? If one does this to their vehicle, it’s good to think about long term repercussions of this projects.

[@larsguddal]

Wow great video I'm going to go buy this right now

[@OtFunnyclipss]

Amazing job 💯💯

[@ReynaldoVelasquez]

Thank you 🙏

[@sridles3088]

Does it affect the rearview at night with all the lights going? I know you can dim them but I wasn't sure if you found them too bright or hard to see potentially

[@ReynaldoVelasquez]

boombro player no not at all. Just adjust the mirror and they disappear. They are overhead so they don’t really show up on the rear ire mirror.

[@sridles3088]

@@ReynaldoVelasquez ok awesome, I'm planning on doing this to my 1999 jeep grand cherokee

[@skyelarbrennan5374]

Does this make it obvious to people outside of you car that you have that installed? I guess in trying to say is it obvious to cops😂

[@ReynaldoVelasquez]

Skyelar Brennan I answer that question in my FAQ section towards the end. Details are in the description. But no it’s not obvious at all. No one will see it unless their car is lower than your car. They would need to be low enough to be able to look up at your ceiling. Plus the roofs of cars are usually Concaved so it’s even harder to see. If you turn the brightness all the way up or even mid range, people may be able to see your face changing colors or shining and then dimming as the stars twinkle. But that’s about it. And it’s harder to tell if you have window tint. Cops don’t care at all. I’ve turned the lights on and stood outside... nobody will know you have them, it’s like a surprise when they step into your car.

[@skyelarbrennan5374]

Reynaldo Velasquez thanks, yeah i saw you answered that as i kept watching

[@dcotai2902]

Handcraft is soulcraft. Well done sir..

[@thickyodasoda2989]

Ima try this on my cla !!