Unboxing the new turbo for my trackday build and talking future plans. Link to the turbo: www.pulsarturb... Oil and coolant lines: www.ebay.com/i... Follow me on instagram: / jonaskakarikas
Пікірлер: 93
@Soulfirer3 жыл бұрын
Ahh.... such a joy to watch. Sorry Jonas - I must have missed this video. I have given it a like now. Lovely turbo, looks really nice. Many years ago I did the 18T- never got round to the 19. Skipped to my current setup Garrett GT3071, with the 0.86 AR housing. It spools heavily c 3200 up. Feels asleep below this. Pushes c 500BHP and 650nm @ 1.8 bar. This is my 2nd turbo, having broken the first after 4 years of everyday use, track days, oil starvation and dyno pulls. I got a brass ball bearing put in this one too as a minor upgrade. Running well at moment 🤞🏻. Always love watching your videos. Class 👍🏻🏴🏴
@stefanmartensson87464 жыл бұрын
If you go for Bosch ev14 1200cc, I have a tune you can use to at least get it started and driving to gdm. Made by myself for 2.3 with T5 cams and Garrett 2876r and with the help of a wideband lambda. A lot of time spent on it. Amul is close to zero. Coldstart on e85 tested down to -10 degrees C. Idles and drives like any 9-5 at lower loads. Gives approx 470hp and 600Nm.
@JonasKakarikas4 жыл бұрын
Thanks, would be really helpful 👍 send to Jonas.kakarikas@gmail.com Did it work well with 1200cc? What Fuel pump did you go with?
@stefanmartensson87464 жыл бұрын
@@JonasKakarikas I went for walbro gst450. Overkill and a tight fit. And required drilling the return hole of the oem fuel pressure regulator to 3.0 mm. Other than that the 1200cc works as a charm. No hiccups and nice and smooth even at very small opening times. Only tuned on e85 though. The deadtime and flow rate in the specs of the 1200cc was not spot on, required a little tuning as well but I'm very happy I chose them.
@stefanmartensson87464 жыл бұрын
@@JonasKakarikas I will email you some questions about prerequisites next week. Running F40 gearbox so I need to change gearcal and can make some other minor changes at the same time.
@davevq3 жыл бұрын
Been following and watching you for a long time. Love the work you do. I like where this is headed.
@juancarloslozano33744 жыл бұрын
YEIIIIIIIIII!!! SWEDISH TO ENGLISH!!! GREAT JONAS! THANKS!
@griffo59 ай бұрын
I want these for my 300zx 😊
@tommybob2764 жыл бұрын
Snacka om julafton riktigt saabgodis ser fram emot uppföljaren. 👍👍
@d4ve5874 жыл бұрын
Jonas SAAB yoda 💪👍
@terolaitanen4 жыл бұрын
Power !
@saabcombi4 жыл бұрын
Very nice!
@bylentjahjai83912 жыл бұрын
I want to know how much high boost on this turbo i mean with stock wastegate can i drive like 1.7 1.8 bar
@JonasKakarikas2 жыл бұрын
Depends on alot of things, but yes you could
@juancarloslozano33743 жыл бұрын
Great video Jonas!! What are your reccomendations to do the same but in a 2002 9-3 2.0 SE engine (HOT)? Could it be possible to achieve 500hp?? Or a need a complete 2.3 engine like in a Viggen??
@shalock67714 жыл бұрын
Tko predator 2.8T saab is pretty fast to he shows good numbers
@JonasKakarikas4 жыл бұрын
Dont know what that is, but sure it does 👍
@wojciechb46374 жыл бұрын
Hey - Can I fit this to ‘02 Saab 93 -B205? Thanks
@JonasKakarikas4 жыл бұрын
Yes
@thonyonetwo4 жыл бұрын
Till vilken av saabarna? Nevermind. Detta ska jag också göra. Måste köpa en 9-5a först ;)
@marcelino2154 жыл бұрын
Den turbon ser riktigt läcker ut rena julafton 😁
@JonasKakarikas4 жыл бұрын
Håller med 🥰
@andrewwright. Жыл бұрын
based on a Garrett....won't give the same numbers...will come close but won't last long.
@JonasKakarikas Жыл бұрын
Been lasting for 3 years now without any problems, made 470bhp with not so optimal exhaust 👌
@ac810174 жыл бұрын
I have a 2007 95 Aero which has done almost 210000km, I thinking it might be soon time to change the turbo,is it possible to place the standard turbo with a bigger turbo and gain 50-80hp more with out doing much modification to the car?? Or should i just keep it stock since i want the car to last another 3 years.
@JonasKakarikas4 жыл бұрын
You can gain that power with a stage 3 tune and keep The turbo. You could not just swap turbo and gain power, without remap of The ecu The hardware upgrade is useless
@J1I9M7M4Y4 жыл бұрын
Ooooh.. Im like a kid the day before christmas. I can´t wait.. This is porn for me! Great video Jonas!!
@JonasKakarikas4 жыл бұрын
🙏 Its going to be epic
@J1I9M7M4Y4 жыл бұрын
@@JonasKakarikas Im a beliver!!
@simokantonen45682 жыл бұрын
wheres the link for turboshop
@JonasKakarikas2 жыл бұрын
Www.pulsarturbo.com
@simka19192 жыл бұрын
I'm interested in such a turbine, the price is affordable, I'm interested in whether the Pulsar is good or not, some of your experience. I like the finish, it looks pretty good .. 😊😊😃
@JonasKakarikas2 жыл бұрын
It is really good, i have been abusing it alot and it still works fine
@simka19192 жыл бұрын
@@JonasKakarikas Thanks for ansver good luck my brother...i baying this turbo for my C20LET Baby😃🥰
@Jimmye10004 жыл бұрын
Kolla in Sweden exhausts grenrör. :)
@JonasKakarikas4 жыл бұрын
Har kikat, helt klart högt på önskelistan 👍
@EricNordenfors4 жыл бұрын
Vill bara nämna att det fortfarande är riktigt trångt för turbon, även med sweden exhaust grenrör. Monterade nyss en gtx2971r på en b205r och det hann bli en del svordomar innan allt var på plats. Jag kör med avkapad kungskobra med silikonböj längst ner och den ligger emot i princip både vattenpump och ac-kompressor!
@Jimmye10004 жыл бұрын
@@EricNordenfors Ja det kan tänkas, men det går. Vill man ha mer plats så har de andra grenrör än de som ligger nära original i placeringen. Önskemålet här verkade ju dock vara att det ska gå att dölja rätt bra så de ser så original ut som möjligt. Går bra att trycka dit original värmeplåt över deras lilla extraktorrör så det är ju perfekt då även om de blir lite bökigt och trångt.
@Jimmye10004 жыл бұрын
Kan även tipsa om att do88 har specialgjorda slangböjar för trånga utrymmen. Kolla in Cobra head på deras sida. :)
@JonasKakarikas4 жыл бұрын
I know 😉
@rafamakuch30044 жыл бұрын
I am wondering how big difference is between this one and original Garrett, anyone have any experience? Because price is much different.
@JonasKakarikas4 жыл бұрын
There might be different quality of bearings etc... In The price of a garrett turbo is research and development. Not sure those expenses are quite as big on pulsar turbo systems, since its based on a already developed product.
@rafamakuch30044 жыл бұрын
Jonas Kakarikas Yup, that makes sense, pulsar didn’t have to invest on R&D, but honestly I am very curious if both turbos are totally same (pulsar vs garrett). My friend have this turbo but original garrett and he tuned his 9-3 arround on 480 HP (b207r) plus typical other hardware stuffs like injectors, IC and etc. Do you know whether this pulsar turbo is made in china?? I am gonna wait for your results, if you will be fully satisfied I will buy too, because price in Poland is almost twice bigger for original garrett.
@JonasKakarikas4 жыл бұрын
Ofcourse its not exactly The same, that would be illegal, but i bet its pretty close. We will see about The results on The 2,3l engine 👍
@rafamakuch30044 жыл бұрын
Jonas Kakarikas can’t wait, when you gonna start installing this turbo? 😁
@JonasKakarikas4 жыл бұрын
Its a bit of wait, need to get car from paint etc... Think it Will be some months ahead, need to get bigger injectors and a exhaust manifold as well and those are expensive parts
@RICARDOALVALAN2 жыл бұрын
I don't know if I missed it but what size and A/R is your turbine housing?
@JonasKakarikas2 жыл бұрын
. 86 a/r
@RICARDOALVALAN2 жыл бұрын
Thank you! I had a Gtx3584rs from pulsar and they're very good quality unfortunately my car was stolen in Tennessee and now I have one with a smaller engine, this turbo might work.
@JonasKakarikas2 жыл бұрын
Yes the turbo quality is really nice for the price 👌 to bad about your stolen car 😪
@jompemc4 жыл бұрын
Najs! Vem blir det som mappar sen då? :)
@JonasKakarikas4 жыл бұрын
Tackar, det blir gdm som får lägga sina fingrar på den sen 👍
@jompemc4 жыл бұрын
@@JonasKakarikas Misstänkte det, lycka till! :)
@Nikos6j3 жыл бұрын
do you think this turbo kit is good for a daily?
@JonasKakarikas3 жыл бұрын
Yes it should be Nice for everyday use 👍
@2TOKE694 жыл бұрын
Kostar dyrt då? Bra kvalle är ju värt pengar! 🤘😃
@JonasKakarikas4 жыл бұрын
Ang priset så är den ju dyrare än dom billiga och billigare än dyra 🤣 vi får se hur den funkar men ser väldigt bra ut 👍
@connyblomqvist36484 жыл бұрын
Vet du hur stor skillnaden är mellan 19T och 20T ? ...Ser fram emot motorbygget och dyno testet 👍
@JonasKakarikas4 жыл бұрын
Inte jätte stor, 20t har 47mm ind 58mm exd tror ja. Mestadels avgashuset som stoppar upp
@connyblomqvist36484 жыл бұрын
@@JonasKakarikas OK då gör 20T inte direkt någon större effekt skillnad om man jämför dessa två.
@JonasKakarikas4 жыл бұрын
Nja inte direkt, lite mer går ju säkert klämma ur än en 19t men inte jättemycket
@CR055FIRE2 жыл бұрын
how reliable is that
@JonasKakarikas2 жыл бұрын
Very reliable 👍
@The_Rock_That_Floats3 жыл бұрын
Tror du Garrets originalversion skulle göra någon större skillnad? Diffar ju en del i pris..
@JonasKakarikas3 жыл бұрын
Större skillnad tror ja inte, prisskillnaden ligger mycket i namnet + att garrett har en r&d avdelning som lagt x antal miljoner på att utveckla teknik, design och funktion. Återstår att se vad den presterar och hur länge den orkar med 👍
@The_Rock_That_Floats3 жыл бұрын
@@JonasKakarikas Tack ok!.. Har haft ögonen på denna ett tag, letar efter nåt till 9-5:an med lite mer krut än 19T som ändå klarar besiktningen
@sopq36514 жыл бұрын
Is it twin scroll
@JonasKakarikas4 жыл бұрын
No, t25 flange
@larijauhiainen85964 жыл бұрын
I dont quite think this one pulls 500hp from 2.3.I think its closer to 400 than 500.
@JonasKakarikas4 жыл бұрын
The gen1 pulls 450hp on a 2,0t so i bet you are wrong 😉
@larijauhiainen85964 жыл бұрын
So you have reference.Ok..But not with the stock manifold! You are not going to use stock manifold are you? 😄
@JonasKakarikas4 жыл бұрын
No with swedenexhaust manifold, original manifold will be a bottleneck
@taknaydamo86643 жыл бұрын
Update?
@JonasKakarikas3 жыл бұрын
Soon
@kusee.3 жыл бұрын
Updates?
@JonasKakarikas3 жыл бұрын
Very soon
@kusee.3 жыл бұрын
@@JonasKakarikas 👍
@hraklismantzouris4 жыл бұрын
Να σε ρωτήσω κάτι είσαι Έλληνας
@aftastosk60163 жыл бұрын
έτσι έγραψε αλλά μάλλον κοροϊδεύει, Λιθουανός πρέπει να είναι.
@hraklismantzouris3 жыл бұрын
@@aftastosk6016 που έγραψε ότι είναι Έλληνας
@aftastosk60163 жыл бұрын
@@hraklismantzouris κάπου σε κάποιο σχόλιο το έγραψε αλλά μάλλον πλάκα έκανε.
@hraklismantzouris3 жыл бұрын
@@aftastosk6016 στα αγγλικά η στα ελληνικά απάντησε έχω ρε φίλε ένα saab και θέλω να το κάνω τερας
@aftastosk60163 жыл бұрын
@@hraklismantzouris Ηρακλή δεν ξέρω τι ακριβώς μοντέλο σααμπ έχεις αλλά εγώ θα σου πρότεινα ένα GTX2867 "πρώτης" γενιάς με τον 11 φτερο συμπιεστή που ταιριάζει καλύτερα σε βαριά οχήματα σαν τα σααμπ. Μην ψαρωνεις με τα πρώτης και δεύτερης γενιάς αυτά είναι διαφημιστικά κόλπα.
@nicksaxo4 ай бұрын
What is your opinion for 400hp on a polo gti 20vt? Do you think this turbo gonna work perfectly?also for daily?
@JonasKakarikas4 ай бұрын
This will be perfect for a daily with 400hp 🏆
@nicksaxo4 ай бұрын
Ar??
@JonasKakarikas4 ай бұрын
0.82ar
@nicksaxo4 ай бұрын
@@JonasKakarikas thank you so much for your help!!