Unboxing My New DTF Printer from ProColored! The A3+ R1390 What Went Wrong???

[@brebearhewett]

“This is my channel.” YES. Always love when creators are 💯.

[@katrinasgracefulcreations3711]

Thanks for watching

[@rabsrealm]

Remove the smaller plugs on the ink tanks. You're pulling a vacuum when sucking the ink through to the dampers. Those are vents and should be left open to prevent the vacuum and allow the ink to flow.

[@kushanthapushpakumara7713]

That's exactly what I thought. The tanks are closed tight

[@gracegraphicsdesigning6398]

Exactly my point

[@kestraughn86]

yes i was going to say the same. I did this and was not getting any color until i unplugged them

[@elevated-apparel]

You have to extract the ink really slow. Once it's in the chainber pull out the syringe then insert it again now this is when you will extract the 5m from it being full already. Another thing is don't let the syringe push air back into the chainber or it will inset air in the lines.

[@katrinasgracefulcreations3711]

I tried not to let air go back in. It’s hard when nothing comes out. But I finally got it last night. Just still working on the back. Thank you for the tips

[@michelleabrams5116]

@@katrinasgracefulcreations3711 hi can you tell me what the best dtf printer to get that’s inexpensive for starting out

[@marcusbryant9193]

@@katrinasgracefulcreations3711 i tried to reply to u directly but im not good with this stuff but u have to take the top off whatever ink color u are trying to feed through the line while u use the syringe. That helps i left a comment a few days ago but didnt know if u got it but keep at it sweetheart its a process

[@katrinasgracefulcreations3711]

@@marcusbryant9193 thanks I appreciate it. I tried everything. I had to send it back. Something was wrong with the waste tank. They fixed it and sending it back

[@marcusbryant9193]

@@katrinasgracefulcreations3711 when u get it back just remember to open the ink tank on whatever color u are trying to feed

[@wandaivetterivera3887]

😂😂😂opening the crate😂😂😂too funny

[@elevated-apparel]

Try removing the plug on the ciss (where the ink goes on the door) remove the air plunge then take the syringe and plug it in the cartridge and pull ink threw slow till it fills up the line. Don't let it push air back in the lines. The after it's done plug the ciss air plunge back in.

[@louisd95714]

One would think for that pirce the company would have provided bottles with the correct openings so syringes would not be needed, like standard Epson EcoTanks. I would not even purchase a printer if I had to inject the ink manually. ALso, not sure if you saw this warning from the manual: 1. The print head and waste ink pump are not covered by the warranty. Due to the characteristics of DTF ink, if the print head is not used for a long time, the print head is easily blocked. Please carefully maintain the print head. If you do not use it for more than three days, please install the print head moisturizing solution. , you can contact our after-sales service to get the operation method; 2.Check the ink stock regularly, and replenish the ink when it is almost used up; 3.Regularly check the ink in the waste ink bottle. If the waste ink bottle is full, clean it in time; 3. After the printing task is completed, the printer should be properly turned off. It is prohibited to expose the print head to the air for a long time.

[@carolynstrachan3702]

I'm sorry you are having this problem. I am having problems getting the color to print the shade I need on my DTF. Learning the software is my challenge but I'm not giving up and I know you want. You will get there!

[@NancyGarcia-cr2is]

OH MY.... I got my DTF printer and oven from Swing Design and my printer came in the crate with foam very well insulated and was very easy for me to open the box myself in about 10 min using a screwdriver and pliers. The oven came in it's own box. I didn't have any issues with pulling the ink through.... I did my first 2 prints and they pressed great!!! now I did see on another channel that my white adhesive is supposed to resemple the outside of an orange peel and my was still grainy. So I think I still need to work on my curing oven settings. I was not sent a filter with mine as I have seen on some other ovens so I hope I am ok w/o it since I have it in an area where I purposely wanted good ventilation for the oven. I am about to do a 3rd and 4th design tonight. I need to review my opening procedure again so I can remember what to do to not have issues. But the opening/closing procedures and daily maintenance so far is a breeze. I hope my experience stays that way. I got the Prestige A3+ w/ the Phoenix 16 x20 curing oven. So far I am loving my experience with DTF.

[@katrinasgracefulcreations3711]

Yeah I wish I had a different brand congrats on your new purchase and hope all goes well for you.

[@roxannehoward7333]

You just amaze me every time you do a video, even when things go completely wrong. I'm sorry, I don't know anything about how to help you solve this annoying issue but if anyone can pull through this, it will be YOU! And by you showing your struggles you are finding out that it's not just you and vice a versa and everyone coming together with ideas on possibly finding the solution. Hang in there Ms Katrina and GOD Bless :)

[@katrinasgracefulcreations3711]

I definitely appreciate everyone’s help and solutions. You guys keep me going even when I feel like giving up

[@nahnisjourney1406]

Katrina, you are greatly appreciated. 🌹🌹🌹

[@katrinasgracefulcreations3711]

I appreciate you all as well.

[@moniquevann9950]

You’re ALL THINGS CRAFTY Congrats to u it will come together 💐

[@dawntyson8970]

You are the favorite big sister I wished I had, giving me all the business jui!

[@katrinasgracefulcreations3711]

Awwww thank you 🙏🏽

[@ladyprintboss]

Looking great thru it all queen.

[@katrinasgracefulcreations3711]

Thank you

[@annettethompson2723]

Hey miss Katrina idk anything about this machine but I can say ITS BEAUTIFUL MY FAV COLORS. SOO NICE. you’ll get it together if you have not already. Funny watching you crack it open thanks stay safe.

[@katrinasgracefulcreations3711]

Thanks for watching. I took a break from it. Still have to get it working.

[@DempsDesigns]

Yaass love the praise break dance 💃🏽 🙌🏾

[@katrinasgracefulcreations3711]

Always lol

[@achimdambmann5823]

😂😂😂😂🎉 Thank you for open the Box like this... i cant stop watching

[@tracywilliams61]

Thank you sooo much. Love that you give the good and bad

[@MontyDGrt]

As a PC guy, get yourself a Desktop. Desktop are inherently more powerful than laptops. Great vid. Glad you were able to share your issues with the DTF.

[@katrinasgracefulcreations3711]

I have an IMac If you watch my channel. The laptop is only for dtf but thank you

[@josephhall5372]

I totally understand what you mean about not having help and I feel bad for you because it it isn’t easy always having to do everything on your own without any help. I applaud you for everything you accomplish by yourself, my mom was a single parent and I watched her struggle so I have empathy. I have to move my grandmother and her entire house of things and I don’t have help right now so I can completely understand where you’re coming from. Sometimes it would just be nice to have someone help share the burden lol. It’s great though that you are an independent woman that has a successful business and you are going places. Plus you can say you did it all on your own! The struggle is real but I have confidence you’ll get the DTF printer working. Love your channel and everything you make!!!

[@katrinasgracefulcreations3711]

Thank you so much. Definitely not easy but I may it work and keep pushing. Appreciate it.

[@naidapederson5079]

Hey, I bought this printer as well. Have you ever had problems with red lights alternating flashing? I re set waste ink with a “key” but it keeps flashing after 4 hours.

[@Teesocrafty]

Hey Trina! I got my $80 off pro colored DTF! I appreciate it

[@katrinasgracefulcreations3711]

Awesome. Congrats! Thanks for the support.

[@Teesocrafty]

@@katrinasgracefulcreations3711 anytime I tried to DM you but I can’t figure out how but a long story short can you send me your email

[@StoneHazeCraze]

I just wanted to climb thru the screen to help you.. Katrina remember to take for yourself as well, all work n play isn't healthy

[@katrinasgracefulcreations3711]

Thanks appreciate it.

[@StoneHazeCraze]

@@katrinasgracefulcreations3711 take time for yourself is what I meant 😂✌️

[@katrinasgracefulcreations3711]

@@StoneHazeCraze I know. Trying to. Definitely need it

[@marcusbryant9193]

Open the caps on the ink storage and then feed the ink through the lines i had that problem at first but keep at it sweetheart

[@sylvestercecil5451]

looks like the vacuum of the syringe is sending the air back into the system. Try unplugging the vent plug on the ink bottles or keeping the ink bottles open so that it can flow.

[@lynnebizlyne436]

I truly love it that you are real 100%. It is so much appreciated. I love your tutorials. Thank you again!!!❤❤

[@katrinasgracefulcreations3711]

The only way I can be. thank you so much

[@maxinealarado9530]

Hi I hope you were able to figure it out. I have a Procolor DTF and really love it.

[@katrinasgracefulcreations3711]

Nope sent it back. Getting another brand

[@Geekedatbirthapparel]

Did you end up sending the other one back too?

[@whatstheteemorebyrocexpres3047]

Hey there. I just got the Procolored L1800 and will say in my “David Arnold voice”, “This ain’t for the week”. I’ve had it setup for about 4 days and it’s been a little challenging to say the least.

[@katrinasgracefulcreations3711]

Yeah it definitely is. Smh. I’m still struggling.

[@pamelarabon7709]

Which computer did you decide to use for DTF? I came upon the problem that mine wouldn't work.

[@CherylFoster52]

Thanks for the videos this is helping me because I’m planning on getting one for myself for Xmas now I just might wait

[@jessiegibson9023]

Good video thanks hope you got it figured out

[@katrinasgracefulcreations3711]

Getting a new one from another company. I posted a shirt about me sending it back

[@mishgist]

Where can I get my Dtf printer 🖨 from . Please drop the site below 🙏🙏🙏

[@katrinasgracefulcreations3711]

The link is now added in the description box with a coupon code

[@sarahmaerandall24]

Wondering if you ever got you dtf printer working?

[@michellewilliams1526]

I see that there are two plugs on the bulk color holders in the door, are you not to remove the other plugs to allow air to help the machine pull the ink? (the plugs closest to the back of the door)

[@dianachau7857]

Just send it back, get a new one. I love your channel.

[@flow_matik]

Can You DTF With Cricut Maker 3 ?

[@katrinasgracefulcreations3711]

A cricut is a cutting machine

[@flow_matik]

@@katrinasgracefulcreations3711 I feel like DTF direct to film printing is less work and faster..?

[@jamiejohnson-zl4sr]

Did you ever get it to work ?? We have had the same problems. They sent us the power source cause it went out. Then a print head and still not working. I wish we had gotten an epson! We have had this printer for almost 6 weeks and …..

[@katrinasgracefulcreations3711]

No I sent it back and I showed and told that in a short video. That was a while ago. I have a different one

[@MarriedtoMuggie]

Had mine since 2023.....my colors flow but my white dont print. So frustrating!! Did you ever find a solution?

[@lisayoung6591]

Looking for help here!! My R1390 procolored is giving me error messages that the ink is empty and will not allow me to print. Anyone else have this issue and can give some quick options for resolution? The procolored support team either messages in the middle of the night and has not had a resolution for weeks that has worked. Thanks!

[@truth7od]

Press the reset

[@ChristopherFranco-mq6zv]

What's the best DTF powder to use?

[@katrinasgracefulcreations3711]

I can’t tell you what the best is there are so many brands. In my other 2 videos I used the ones from heat transfer warehouse. Links are in the description box

[@suppliedoasis6143]

How do you buy the software for Mac? No one has given me this option, they only say it is windows compatible.

[@katrinasgracefulcreations3711]

I sent this back I had to buy a laptop I never used it with my Mac

[@pandemiccraftee]

Your a BOSS!!! I’m sure your werk it out! Watching you see if this is something work for😊

[@veniselindo6272]

Pull the ink through more. And do a head cleaning several times. Remember dtf printers are converted.

[@katrinasgracefulcreations3711]

I finally got the ink through last night. I will be doing the print head cleaning today.

[@veniselindo6272]

@@katrinasgracefulcreations3711 Just be patient with it. I put mines together from March and now I know how to fix the issue without contacting support.

[@ashleybringer2877]

Open the ink door. The top of the inks do you have both of the little plunger in? If so only the big one should be plugged

[@tatianaquinonez6079]

Katrina I 😅😅 enjoying your video

[@dronesoar]

I see in the comments that you got it through. Well done, i hear you have to keep the white ink moving or shake it up at least once a day on Dtf printers like that.

[@katrinasgracefulcreations3711]

Yeah there is daily maintenance just like a DTG machine. I have to get used to it. But my issues were day 1

[@tresabaker7703]

❤ Girl you look beautiful and amazing as always I always enjoy your videos and my thoughts and prayers are with you and your family always! God bless you and a speedy recovery

[@katrinasgracefulcreations3711]

Thank you

[@StephanLamar81]

How often should you do maintenance on it, & does it have a automatic ink circulation system?

[@katrinasgracefulcreations3711]

Everyday it says

[@carmenadames8395]

I set up mine today but I have a Mac how can I download the program or I have to pay a computer

[@trubel_473]

does anyone know where i can buy a dtf roll holder for my printer? if possible send a link

[@scaasiyburllc]

Wow. That was a lot to handle. Maybe you can do a system test print or print head clean.

[@brialo6016]

You are Strong you made it

[@Michybon]

I felt your frustration. Hope you get it working!

[@katrinasgracefulcreations3711]

I hope so to.

[@ghostdVice]

Hello, how many software did you use? I bought a used printer but it only came with the rip software. I have the same problem with the blinking light. Could you tell me which software? I would really appreciate it.

[@dronesoar]

Thought it was going to be like Raider of the Lost Ark when you finally got into that crate.

[@katrinasgracefulcreations3711]

lol 😂

[@dronesoar]

@@katrinasgracefulcreations3711 Just watched the rest of the video, poor you it was worst than raiders of the lost ark lol

[@nahnisjourney1406]

I ABSOLUTELY LOVED THIS VIDEO!!! ♥️♥️♥️

[@katrinasgracefulcreations3711]

Thank you so much for watching

[@CornyFlakes100]

I agree with Katrina,I am going through hell with my 1390 dtf procolored printer,I did all the protocols machine suffers in all ways.Guys from procolored just find ways to blame everything on you.About to search other options.

[@wendydawson8886]

You have this girl! Even with this hiccup, you're still Bossing ❤️✔️

[@katrinasgracefulcreations3711]

Appreciate it. I’m getting there

[@rudyiraheta80]

does that works with ms dos

[@veniselindo6272]

It works with windows

[@rudyiraheta80]

@@veniselindo6272 have you tried printmaster plus with this printer

[@veniselindo6272]

@@rudyiraheta80 no I haven’t. I have a Mac so I just paid to add it.

[@bluetoothtv]

That was a level up unboxing😅

[@Liviarzita]

You are the real deal!

[@katrinasgracefulcreations3711]

Thank you 🙏🏽

[@DJFATSTAX]

Queen I know I'm late to the party but I'm sorry you had a hard time with that printer. I think I'll just get a good inkjet and use the hack. If I need speed I'll use TKO like you said. Thanks for the info:)

[@chantilirving1586]

I love the color does it come in different colors and where did you get it from?

[@katrinasgracefulcreations3711]

It’s stated in the video. And I didn’t keep this one

[@bethalvarez6956]

It sucks when stuff doesn’t work I had the battle of the printers yesterday and I was losing my mind

[@katrinasgracefulcreations3711]

I know the feeling

[@yosoymoequius]

Hey Ms. Katrina... I continue to love your videos. Question though.. Do you have a video on the difference within the different Rollers with the Procolored DTF? I would love to know as I am doing my research in buying a dtf machine. Thank you,

[@sierram6315]

did they fix it when you sent it back? i saw you got a new brand but just curious about this one! i’m deciding between this one & the white one with the panda currently i’m not finding too much about this specific one so i’m a little nervous 🥴

[@katrinasgracefulcreations3711]

No I have a different one I showed it on my channel. I no longer have this model

[@truth7od]

I found out that when they assemble these printers the nozzles that the ink lines connect to be poorly separated after manufacturing, mean the inlets be pinched shut,

[@denisetirado5138]

So you mentioned having to pur hase a windows computer, which do you recommend? The company i am looking into says they dont offer the Mac RIP software. Im an apple user so id need to get a Windows labtop to run this printer 😵‍💫

[@stud01777]

Katrina did you ever get your printer Fixed or is it still down

[@doommega]

FELLAS LETS get out there and SAVE HER DAMMIT LOL - hey girl good vid

[@katrinasgracefulcreations3711]

😊😂 thanks

[@lynnebizlyne436]

Wish I could help but I am totally clueless on this machine. I’m totally sure she’ll get this working and fill us in on how she did it ☺️

[@gudprint8737]

Open the small rubber cover on the ink tube when your printer is printing

[@katrinasgracefulcreations3711]

idd that still not working.

[@MaryStremmel]

I ordered one from Aliexpress. I was able to get all the air out of the lines and I would get one good print and then it would get clogged... So they are using an older Epson Printer so I am assuming the print head is either used or remanufactured so I ordered a new print head and will install and try again.

[@nahnisjourney1406]

Oh my goodness! I felt so bad watching you get that crate open.😢 I’m so sorry 😞. But, Girl, you are my SHERO!!! Super Woman!!! God’s grace is sufficient!😊🙏🏽🙏🏽🙏🏽

[@katrinasgracefulcreations3711]

Sometimes I don’t want to be a Shero…lol. But thank you so much for watching.

[@mikewoods6407]

Open the holes on your ciss so the ink can flow

[@nahnisjourney1406]

@@katrinasgracefulcreations3711 I completely understand… just as people who are referred to as heroes simply for being humanitarian. I have often heard them say that they were just doing the right thing, and that they didn’t feel like a hero. Most people aren’t trying to be heroic, but others who see the act, are the ones who see it as heroic. I don’t mean to sound preachy, but I referred you as my SHERO because you stuck with it although you were in a lot of pain. I felt so bad for you and wished someone stronger was there to open the crate for you. I know the pain of having to bend over to accomplish a task, all while your lower back is hurting. I don’t think… no, I know that I wouldn’t have been able to stay with it because of my lower back that I had and unsuccessful laminectomy on. (The surgeon promised me he could fix it, but he failed. Now, my back is worse than before.) Anyway, I’m sure that far more people than I feel about you being our SHERO… not just because of that one day, but because of how you fight to be successful for both you AND your son. He is so intelligent, and you are an incredible mother. Yes, I have seen your video where you were being transparent about everything. So again, I have nothing but respect and admiration for you. …and you still push through to do these amazing videos TO HELP OTHERS learn to use their own equipment, to make informed decisions on equipment that you do unbiased reviews on, and how to even start a business and how to save money when shipping products to customers. You do so much good. Thank you. 🌹 🙏🏽

[@nahnisjourney1406]

@@mikewoods6407 That’s what I was thinking, but what do I know. 🤔

[@carmenadames8395]

what was the problem that you were having?

[@globe-trotter4860]

I feel sorry for the printer, I wonder if it got fix, or if at least finish printing the first roll, i hope it really was a manufactured problem, there are another videos were everything looks smooth and easy, also, the equipment is handle nicely.

[@MervHernandez]

You are allowing air back into the lines. When you start extracting, pull the needle out when you cant pull anymore. Release all the air in the sarenge and go back in and pull again. Personally I think the lines they use are to small making it hard to suck out the ink.

[@katrinasgracefulcreations3711]

I was trying my best not too but it was very hard nothing was coming out. It’s getting fixed now.

[@macoygunida]

patiently waiting for the update.

[@MTaropatchkeikis]

U R so true... Appreciate you

[@lizb3813]

Thank you, I was about to order but good I saw your video, now I guess I'm holding back. 🙁

[@katrinasgracefulcreations3711]

They sent me the smaller one that seems to work better for everyone but I still have another come bigger one coming from another company.

[@lizb3813]

@@katrinasgracefulcreations3711 Thank you! 😊

[@gloriacastillo7188]

Katrina can you please share on which of the smaller ones they sent you. Before I purchase one I want to make sure it’s nothing like the Epson printer I had for only 5 months and couldn’t get it to work anymore. I had to purchase a sawgrass printer which I’m loving so far. Had it for 2 months now and no issues. Thanks

[@katrinasgracefulcreations3711]

@@gloriacastillo7188 the white one with the panda on it. I’m gonna unbox it soon

[@tresormukenge4161]

much thanks. I just peeped mad game on this one

[@sliickplay8005]

When I extract that blue ink… red came out. I think they had everything set up wrong colored. Now I’m freakin lost

[@unlimitedtowing4334]

I'm so confused. I just wanna know the best DTF to buy. I always come back to this procolor but idk. Anyone help? What's the best dtf out here??

[@flores1tv]

Stay strong Sis

[@Klee1013]

I’m having a issue where it had a run code error and now won’t print.

[@katrinasgracefulcreations3711]

I haven’t even gotten that far.

[@printedmemoriesbyclaudette5092]

Hi Katrina, I have a Dtf Pro colored I might can help.

[@markl2095]

The only thing that I could see is when you were pushing air back in with the syringe. Hope it gets fixed. I was looking into getting one. I might just get it from Amazon, mainly for the customer support if things should go wrong.

[@macoygunida]

Nothing is on prime for dtf printers. It’ll be a struggle without prime cause amazon can’t do much if you buy it directly from seller.

[@brianwaden6955]

Hey Katrina I was looking into a video I have a question Will you put ink in your costumes you know you have one you put ink in and you have 1 with a vent. Try to take the one for the vent unplug it so you're cautioned to get air flow. Try to do another video I'm watching by the way my name is Brian I'm from Greensboro North Carolina.

[@TamiT3]

I'm only 3 min in and crackin up! I swear you are awesome!!! I'm not making fun I'm laughing because my son (autistic) said mom that's something you would do lol. I would chainsaw to that beast of a crate lol

[@katrinasgracefulcreations3711]

I wish I did have a chainsaw. Lol. That thing took me over 3 hours to get into

[@TamiT3]

@@katrinasgracefulcreations3711 lol

[@sani-flysani-time9337]

Help I have same machine they not want me to return it !

[@DoDreamOn]

Love you Boo and praying your strength I know we’ve talked about this thanks for sharing and I hope everything gets fixed soon… xoxoxo Everything will work out🥰 about to text you ♥️

[@katrinasgracefulcreations3711]

Thanks hun. I hope so. Seems like everything is getting to me lately.

[@DoDreamOn]

@@katrinasgracefulcreations3711 one day at a time and it’ll all work out… it always does… in the meantime I got you covered with prayers and a shoulder ♥️

[@airheadhtx]

I literally just ordered this printer two days ago through the homie Sam! :) Is there a way I can get an update on the printer. Im a little worried because mine comes in in a few days.

[@calw8085]

wish you would not have ordered it. All they did was convert a cheap epson model and charged you $3,000 for a $500 printer.

[@airheadhtx]

@@calw8085 yup. Except I paid $1800 lol

[@belindahicks6137]

Love you!! ❤

[@katrinasgracefulcreations3711]

❤️ ❤️

[@eddyboss2000]

i had this model same and i was able to use it 15 days only !!! bad bad things !!

[@katrinasgracefulcreations3711]

Wow yeah I needed up sending mines back. A hot mess. Mines never worked

[@NERO-ez1mn]

the air are so visible in the tubes that is why i trust the epson ink charge more

[@katrinasgracefulcreations3711]

I fixed that part last night so now I will be printing today to see if it works

[@myheartsoulcreations1624]

Shit happens girl! As long as they help with a solution!

[@AlfredoMartinez-vt3eb]

No worries it happened to me too. Just be patient talk to the people that bought it. We spent too much money to buy the stuff just be patient because I’m going through the same thing with all American print supplies.

[@katrinasgracefulcreations3711]

That’s the one I thought I was going to get

[@AlfredoMartinez-vt3eb]

@@katrinasgracefulcreations3711 right now I’m in All American supplies warehouse. It’s been three hours the still checking on my printer. They told me I got a wait another 30 minutes. Luckily it’s in California where I live. This is too much. I’m driving myself crazy with this pruners. Hopefully your stuff gets resolved fast, I’ll let you know what happened when I get home because I’m still waiting for mine they say they’re going to change the heads right now

[@macoygunida]

@@AlfredoMartinez-vt3eb any update? I’m thinking of getting the A3+ R from All American supply after watching this video. I’m also 22 mins away from their warehouse here in Long Beach .

[@AlfredoMartinez-vt3eb]

@@macoygunida sorry for replying so late but I do get the 83+ hour from all American print supplies they have to change the head of the printer that was the problem but I’m working on it so far and it’s working pretty good

[@AlfredoMartinez-vt3eb]

Sorry, I was trying to text fast. I’m trying to say I got the printer. It works pretty good so far.

[@jabucustomcreations]

Where’s your brother A-Dubb Mr Alan help our sister out LOL😂 but it’s just a hick up you remind me of myself we NGU Never Give Up and when we have to not happy about it. I LOVE THAT COLOR THOUGH, matches my Tumbler press ❤

[@katrinasgracefulcreations3711]

Hmmmm I have no idea

[@adubbproductions]

I tell you why. She coulda called me. I would have told her that all she had to do was twist the clips and and push the tabs up. Ruined that beautiful reusable crate . Box abuse. Hey, Independent women wanna be independent. Smh. Rip to the top of that box. I feel her pain on that printer though. These things are not tried and true. They come straight from over seas and to the customer with no QC checks. They need to lower the price cause we are doing all the quality control and as you can see it ain’t working out so well. Feel so bad for the box. She coulda called me. Hmmmmm 🫤

[@jabucustomcreations]

@@adubbproductions 😂 You did say you loved your box but you made your setup look so smooth but I know K gone make it happen I got faith in her

[@katrinasgracefulcreations3711]

@@adubbproductions Yes I am independent that’s not a bad thing at all. We didn’t have the same type of box yours was a different material. Mines was just wood. So it definitely wasn’t beautiful. And call you? You don’t have no time for lil ole me anymore.

[@katrinasgracefulcreations3711]

@@jabucustomcreations thanks I have to do what I have to do when I have no help.

[@LouRao]

OMG! I couldn’t stop laughing 🤣🤣🤣 during the time trying your very best to open that damn crate. Girl, I felt for so bad and wanted to jump into the monitor providing some help but technology isn’t there yet🥲. This video segment made my morning. That said, I would not have purchase any DTF printers that require syringe to fill the ink cartridges -my opinion. Whatever this brand of purchased all they did was cut cost by having consumers to use a syringe. This in its self is a red flag. Epson and other known brands is a choice I would had considered. Yeah, may saved a few bucks but the headache filling inks isn’t worth it. Neither are the computer software and drivers. Plus to pay for a Mac software is absolutely ridiculous 👎. As for the ink not flowing through the air tubes may be factory error. DTF printers has a air pressure pushing the ink through the tubes and it may be damaged. If you get it going not think this may happen again after replacing the ink. Something like this situation may also cause ink clogging -something to think about. If this was me -return it! Otherwise hope it gets resolved. ❤your videos 😎.

[@TheBlakescat]

Gotta pull that ink slower. Its too thick to pull that fast, which is why it was fighting you. Once you get that aor out hopefully you will be on a good place.

[@AngelBDesigns]

Hey Katrina! So sorry you’re going through this. I have the A4 version and my issue was opposite. I had all the colors but no white. I did a power ink flushing, done through the software. And my white has worked ever since. Not sure if you tried that yet or not. Hope everything works out for you! ❤

[@katrinasgracefulcreations3711]

Thanks I guess I will try that. I’m really over that Printer. Lol

[@macone06]

@@katrinasgracefulcreations3711 remove the smaller end of the caps that go into the ink bottles They are restricting the flow Its likke putting a straw in a cup of juice then putting your finger over one end and lifting the straw out of the juice it will not go anywhere until you release your finger 😁😁😁

[@amberfischer2959]

Yesss! Macone that’s absolutely what it’s doing. I could tell when I seen the lines. My friend had the same issue except the white wasn’t printing all colors. Were. Also she had to get the Mac software

[@macone06]

@amberfischer2959 hope this does it as i had the same issue with my sublimation printer and all along it was just the tabs in the breather holes Im in the uk so i hope you have the help from the other side of the pond 👍🏽👍🏽🤞🏽

[@veniselindo6272]

The printer is a headache until you get the hang of it. In the beginning you will waste a lot of ink. I finally got use to my erasmart after several months. It’s frustrating for sure. You have to do head cleaning over and over again.

[@hollotechpc]

You are definitely need an air purifier or inline vent fan with duct to vent those chemicals created when curing straight to outside.

[@marvinallen7497]

🤣 I got to follow you on here it does unlatch a lot easier

[@katrinasgracefulcreations3711]

I finally got in it but the latches were pried down so tight.