Unboxing

[@NeoIsrafil]

What a deal! All those upgrades and extras! Guy sold his whole kit!

[@GarageMiniRCUK]

Yes, although there was a sterrign issue with the car. But I fixed it after much work and a few tweaks . Runs great.

[@BMR3]

Woooohoooo! Now this is exciting, can’t wait to see what you make of this car :)

[@athermahmood1065]

Now that's a parcel worth waiting for! Awesome goodies in there!

[@GarageMiniRCUK]

Yes I got lucky on ebay. Although the steering needed fixing, all the parts were provided in the haul. 👍🏽

[@jamesparoline3757]

You hit the jackpot I just got finished putting together the GLR but I'm having a hard time getting it to work with my EX6R the steering is so sensitive after you get it going maybe you can share your setting again one heck of a deal

[@GarageMiniRCUK]

Yes, sure will, I'll be doing a track day Saturday and will get the set up done by then. I'm going to use a DasMikro asf 4 channel reciever.

[@jamesparoline3757]

@@GarageMiniRCUK Thanks

[@GarageMiniRCUK]

hi , I found the same issues with ex6 on asf. I reduced the steering speed in settings and steering return ,this made a difference ,I am using this as a drift car so it is a different set up. Although I ended up switching to my Nb4 radio and a genning servo due to the existing servo jamming . It handled fine with out any steering adjustments needed with the nb4 .

[@patrickjean-philippe7679]

Nice, have you set up your web site for these 1/27th scale cars. I bought a Mini-Z 19 years ago but since then I have lost touch with the various improvements, brands, etc… I would like to find a comparison amongst AWD top of the range racing models with carbon fibre 98mm chassis and shaft transmission rather than belt. Are there any shops for these in Dubai, UAE ?

[@GarageMiniRCUK]

Yes. I have. The website is about the types of cars. The Gla is the best awd racer in my opinion. Please see my more recent reviews of it. Not sure about dubai

[@patrickjean-philippe7679]

Thanks 🙏🏾

[@BeaversHobby]

Wow! Full set of GLA and goodies! What a great buy. That XRX servo is really good. I also have one. I'm really curious about the origin of this car. As far as I know those wheels are on sale almost exclusively in Asia.

[@GarageMiniRCUK]

it also has an xpower sensored brushless esc and motor(s). I purchased from a guy here in the uk and had it delivered within 2 days. It says almost ready to run on the box ,but that model usually comes with a cheaper gl racing speedo similar to the atomic one .steering was jamming on the servo head and limiting right turns so a bit of work was needed .

[@BeaversHobby]

@@GarageMiniRCUK Jamming servo saver is a common problem of GLA. I read some people revert it back to standard servo horn. Xpower ESC is really nice too. Seems like you got an EU spec car. International spec will have non-sensored ESC. EU will come with Xpower sensored ESC and sensored motor. Really happy to see you get a GLA. I'm waiting to hear your opinion.

[@GarageMiniRCUK]

@@BeaversHobby it's like you predicted the future. That's exactly what I did! (revert to normal servo horn.) video coming soon.

[@alismailyabdulbasit]

@@GarageMiniRCUK Hi ... Any plans to sale the GLA ... Best regards Abdul

[@gregdemandanteii44]

Great amount of goodies in the box. Btw may i know what body is that orange one. Kinda like it. More videos please. Thanks!

[@GarageMiniRCUK]

I think it's an Audi r8. 👍🏽Thanks

[@gregdemandanteii44]

@@GarageMiniRCUK is it the GL brand or atomic? Anyways, thanks for the time answering my queries. Have a nice day or night (which ever) stay safe and more videos.

[@GarageMiniRCUK]

Gl brand. The gla is an mazing car.

[@gregdemandanteii44]

@@GarageMiniRCUK yeah really great car.

[@donfitz69]

Can't wait to see the comparison to the BZ3.

[@easyeas01]

Great video. Just a quick question as i'm new to this, can you fit any gyro onto GLA for drifting?. I have GLA with DasMikro FUTABA S-FHSS receiver, Futaba T4PV transmitter but would like to know what gyro to get for drifting and how does it connect to the electronics i'm assuming it plugs into the receiver? thanks for your videos and advice, J

[@GarageMiniRCUK]

Hi, yes it plugs between servo and reciever. I have the onisiki gyro which is great. But if you have das micro reciever you might be better off with one thst has micro plugs. What servo you have?

[@easyeas01]

Garage RC I have the servo that comes with the GLA V2.1 kit it has “GL003-DMG” written on the side of it

[@GarageMiniRCUK]

That's a nice one. So it has a mini jst plug that's fits in your reciever. Most gyros come woth futaba style plugs... Except the atomic DRz gyro. That's a really good one and comes with the correct plugs. www.rcatomic.com/atomic/index.php?main_page=product_info&cPath=3_331&products_id=5938

[@ST1VO]

Wan't to sell it?!! I'm on wirral.. I just rebuilt a k989 following beaver hobbys instructions.. great stuff!

[@GarageMiniRCUK]

Hi, mate, same here I used beaver's videos to mod a k989. The gl is close to my heart. But I might part with it. Do you get to race anyone where you are?

[@rctony710]

Can you compare this car to the atomic bZ3? Would you review a bz3? Why aren't there any videos on the bz3?

[@GarageMiniRCUK]

kzbin.info/www/bejne/Z2a6d62ufrJ-pLs I will be comparing with bz3 next video.

[@killahkay2112]

ok I 'm not sure what wheel offset to get ... 0 to + 3 is 6 Set just for the Font or rear . 12 set in total :( Need he your help .

[@GarageMiniRCUK]

Depends what shell you are putting on it. I bought a set of awd mini z wheels as it had an asortment off offsets. I'm running wide 3 offset at rear and 1 narrow. For stability wider is better, but depends on shell. Too wide and it won't fit some mini z shells. You can get spacers to increase off set too. First decide what shell you want. It's lexan then I'll play around wirh a set up today.

[@killahkay2112]

​@@GarageMiniRCUK yea I was planning on getting that . but they were all out of stock in all the shops in France. All good . I got Some F2 , F3 ,R0 ,R1 . to start here off Got a McLaren 12C GT3 that I need to paint. 5250Kv & a couple of lipo's . can't wait . hopefully it won't be to long

[@GarageMiniRCUK]

@@killahkay2112 ill set my gla with a mclaren shell. I think it'll be wide 3 at rear and nRrow 2.5 at front. Tell you what I think.

[@GarageMiniRCUK]

I've done a gla video so you can see how the wheels and mclaren body match up. I'm using the original carbon base plate 98mm set up. 👍🏽

[@esmokebaby]

Where can i buy bodys i looked on the main site but the ones i want are discontinued

[@GarageMiniRCUK]

What types are you after? Mini z asc or gla lexan type?

[@esmokebaby]

@@GarageMiniRCUK ether or i have a wltoys p969 gona do some drifting it has a 98 wheelbase

[@GarageMiniRCUK]

@@esmokebaby if you are in the UK I use wheelspin models, otherwise I normally get mine from ebay. The wl toys fits some of the mini z 98mm shells, but not all of them, I'll try and find a link to help you.

[@esmokebaby]

@@GarageMiniRCUK no in the us. And awsome thank you

[@GarageMiniRCUK]

@@esmokebaby kzbin.info/www/bejne/Y5ime3iOjbx1e9E Watch this video by beaver hobby channel. It'll help, he has put quite a few different shells on his wl toys k989. Ebay is pretty good in US if you search kyosho mini z. I've picked up some used bargain shells. Also remember if it's a rwd mini z shell the wheels won't fit wl. Only the awd mini z shell wheels fit and even then you want zero offset as wl k989 is a wide chasis. So the 98mm subaru shell is no good as its not wide enough for k989.

[@mr30fps39]

Where can i buy and how much

[@GarageMiniRCUK]

Hi, which country are you in? I'll have a look who is the closest to you. I will be launching my own website for these cars soon. 👍🏽

[@mr30fps39]

I live in America

[@GarageMiniRCUK]

Normally from China approx $200 depending on what you need to spec up

[@agades3022]

Hello I would like to buy the same model but impossible to find a reseller in rtr, can you communicate to me the coordinates of your reseller

[@GarageMiniRCUK]

There is a place in Germany that sells the rtr version in the same spec as mine. I will get you the link.

[@agades3022]

@@GarageMiniRCUK thank you very much, so I look forward to the link, best regard

[@agades3022]

@@GarageMiniRCUK thank you very much, I look forward to the link, best regards

[@GarageMiniRCUK]

@@agades3022 I've ordered to the UK and they were very efficient. www.srcc-devils.de/gl-racing/sets

[@lucada32]

@@GarageMiniRCUK what speeds can you expect from the 3500kv motor?