Unbrick your Master, Master Pro or T4.

[@kalbic]

Roger, you saved me. I bricked my Begode Blitz and this technique worked. I had the app up with the firmware I was trying to install. I had unplugged the power/plugged back in. Held the lift button, then pressed and held the power button and then started pressing the lift button quickly while never letting go of the power button, I saw the firmware start, I let go of the power once the firmware completely loaded up. Worked like a charm.

[@roghaj]

Awesome!

[@gialongtonthat5404]

did you do it with an iPhone or android?

[@mariojandrisevits7212]

Roger Mein Alptraum ist vorbei😅Das selbe gewesen bei meinem Extreme.Du hast mir so sehr geholfen 🎉Danke

[@Euc_spirit]

Wie hat er es denn nun geschafft? Ich verstehe das gesprochene in dem Teil des Videos schlecht..

[@mariojandrisevits7212]

@@Euc_spirit Knopf Start drücken linken schnell mehrmals schnell drücken.App laden Update Firmware starten bis verbindet.. nichts drücken bis %100fertig.

[@electricunicycleadventures6386]

Thanks Roger! I would have been lost without this video!

[@freestyler7]

I admire your patience and persistence! It seems that master style boards require you to keep the power button pressed in order to keep the wheel on. Be sure to check the power connector for brown outs caused by sparks. I have an anti spark cable that I use for this reason.

[@Toryo213]

Good job Roger no exact science to these things yet gotta rely on the community 👍

[@mahdihosseini6361]

THANK YOU SO MUCH THIS VIDEO HELPED ME RIGHT NOW

[@FinnBjerke]

Roger u bloody well rule.

[@floatypiet]

Thank you so so so much Roger! I had the problem with my T4 today. I'm able to go to 100% but the light won't turn on when I get to 100% 🤔 so I still can't turn in my wheel

[@coolhawk2003]

Cool stuff

[@MC-qj2zd]

My friend holds down the lift button the whole time starting before the update and after it finishes.. and it worked for him 🤷

[@ZuberEUC]

I think EUC World, now puts the Master into "flash mode" automatically when you update firmware to the Freestyle custom firmware?

[@roghaj]

This only becomes an issue if the flash fails. Once your wheel is bricked, it will not accept an incoming firmware request. That’s when you need to put the main board into boot loader mode.

[@stevescott5858]

I just received my MP pro v2, should I even attempt to update the firmware?

[@slydogracing]

Roger! I literally have a S22 and bought a Master just because your videos are so Awesome! Watching you rip on your Master made me pull the trigger. My problem is I get it today and the suspension is pure garbage please pretty please explain to me what you have done to yours to make it so smooth. I am 220 and mine just bottoms out and has no compression dampening. Thanks in Advance for your time

[@roghaj]

Thanks a million. Makes me feel awesome. I really do love the wheel. Here is a video where I explain the suspension stuff. kzbin.info/www/bejne/fXi9lZZvZ9Zopsk

[@slydogracing]

@@roghaj You da man! Thank You Thank You at the beginning of the video you literally took the words out of my mouth. I suggest a name change "Roger EUC Wizard" seriously Thanks Again

[@dantemarcos1410]

Roger that!😂

[@ElectricUnicycles]

Very nice. I need to find the deep dark forum that you're hanging out in to find out about this stuff 🙂

[@roghaj]

Stumbled across it while doing some human trafficking.

[@electricunicycleadventures6386]

Mine was getting 1 % for awhile then I closed every other app on my phone tried again and it went through just by holding the power button. I don't believe you need to tap the other button.

[@Simonisms]

How on earth did you come up with this fix? You're a wheel wizard for sure 🧙‍♂️

[@唐人街快车]

User error?

[@CrunchyTire]

Any chance you have the Master linkage arms or whatever they're called to sell during martys tour? I like my shock but Im looking for the option to change it out and need those custom mount bracket. 😀

[@roghaj]

I’ll try to throw a few in my car for Friday.

[@CrunchyTire]

@@roghaj that would be amazing thanks!

[@Papalou1234]

Hey Roger you said you have to discharged the caps but when you unplug the power you did not press power to discharged the caps 🤣

[@roghaj]

I would assume that was while the headlight was on. It would almost instantly discharge the capacitors.

[@yeahbuddy6852]

Maybe Begode should do a (how to video them self) ?

[@roghaj]

They should. They won't

[@Hunter_Heart]

So, your buddy connecting to the app, therefore you couldn't make the proper connection through your phone's bluetooth. He completely closed the app, then you press and hold the power button (right button, power) to get into the bootloader to flash the new firmware.

[@roghaj]

Actually the steps were different than the master. On the master, you don't hold the last button. It would just beep. You know you're good. With the master pro, I was just looking at the screen and it was starting the firmware update without me hitting a button on the phone. I was so happy I fixed Josh's wheel. He is a nice guy.

[@Hunter_Heart]

@@roghaj Good thing you found a solution and its recorded on KZbin. This would benefit future owners of MP if they ever run into this problem. Begode should give proper instuction incase we need to get into the bootloader to flash a new firmware. Are you going to put its through its paces?

[@meriwald1329]

🤦 If anyone has this problem and wheel won't accept the new firmware - this random clicking and metling connector pins with connecting/disconnecting it million times is not going to help. There is a correct procedure for entering that mode. Text me on telegram if someone needs help. Same username

[@torion29able]

What is it...I just bricked mine tonight smh

[@gialongtonthat5404]

what’s the procedure?

[@gialongtonthat5404]

@@torion29abledid he respond to you lol

[@omidel.]

Why did you reupload?.same 🪅sound at the end..

[@roghaj]

I was missing the intro on the other one. People were asking why I was doing this and I was confused. Did not realize the intro was gone.