Begode Master PRO: HATE the Unboxing, LOVE the Power!

[@gar_ee8884]

A pro tip for saving yourself the trouble later, to remove the backing of any 3M adhesive backings, just use a hair comb, brush it over the corner and it will separate them instantly. Takes no time at all.

[@freshlycharged]

😮 what!? I need to try this!

[@mathieudu40]

nice tip ! What works well also is using a craft knife.

[@f.cscootriders]

Ive found using a Stanley knife blade to lift the paper from the adhesive helps a lot too

[@RoastPorkandGreens]

Just use scotch tape to pick up corners

[@Vmaxfodder]

I love how you support safety gear!

[@GitDatPC]

I'm hooked on my EXN 🙂 Perfect balance of performance, weight, stability and range 👌

[@VECTOR_Coasters]

yet almost zero safety

[@MiddlegroundWithMathew]

@@VECTOR_Coasters 11 riders in my group, 8 on EXn going on 2 years and probably 50k Mike's between us, the only problem any of us had was changing the stock tire out and 1 dead headlight. Once Begode became complete owner instead of Gotway, QC went way up.

[@VECTOR_Coasters]

@@MiddlegroundWithMathew (this excludes the ex30) they all have no water proof rating, hot charge ports, no temperature sensors in the battery, no smart bms, no dual hall sensors, some wheels are transported without transport mode, the master, t4 and master pro all had motor issues, the old shells of their wheels (msp, rs, and exn) all have shells that are as water proof as a sock (that’s easily fixable though), all of them have hot charge ports as far as im aware, no tilt back for over torque, etc but they have improved a little which is good

[@greenwave819]

@@VECTOR_Coasters wow from what you say, it is crazy anyone would ever ride a Begode wheel. And yet so many do, and have none of the issues you talk about above... because those issues are very uncommon. All makes have issues here and there. Begode according to many (those who sell/repair/ride), are now very high quality

[@VECTOR_Coasters]

@@greenwave819 they happen more then other manufactures and also people ride them because of the extreme power and they are not high quality besides the ex20

[@RCDevotee]

Thanks Andrew and Jimmy! Happy New Year! There are quite a few folks in the BAESK8 group already rocking Master Pros. I only have a Master but learned to do the following before I ended up getting one: 1. Ordered the Grizzla fairings and pads which replaces the stock pads except for the little one on the bottom. 2. Use and X-Acto blade to take the 3M top layer off. You should be able to get between layers easily with the blade. If that proves problematic you can make a little cut and stick the blade inside the cut and lift the top layer off. 3. Ordered a much better shock pump while waiting for my Master to come into stock. I can easily get over 350 with a real pump. 4. Just planned to take the batteries off to remove all the plastic. If you have the tools ready and haven't put on the pads it can be done very quickly. The initial setup isn't great but the ride of the latest Begode wheels is amazing. I loved my EXN HS but have no regrets selling it before the Master arrived. I already knew from the first ride on 134v wheels with suspension that there would be no going back for me. I was able to blast around on the EXN fine through San Francisco but it is soo much better on the Master. Bumps and street obstacles don't impact the Master like the EXN. The Master just doesn't have great range since you can sustain much higher speeds more easily. In addition, the pack is just pretty small in comparison to the big boys. I don't care about doing big air or singletrack on an EUC so the Master line of EUCs works for me. It is great to see all the next generation wheels and what they bring to the community.

[@freshlycharged]

Excellent tips to help smooth out those unboxing pain points. Just wish such an expensive wheel came with a more premium unboxing and setup experience. But you are correct, the ride is pretty amazing!

[@greenwave819]

love the smiley logo. Yall should have stickers! This wheel looks so raw. I'd ride all over the Rockies!

[@Xailow]

Can't wait to see a range test on this!

[@freshlycharged]

That’s gonna be a long video! 😅

[@stevescott5858]

I believe someone said on KZbin, that they got 16 miles of range while averaging 44mph

[@steveo6034]

Like Andrew mentioned I wish someone would develop the hardware/software and interface to be able to use our wheels as a backup battery. I'm gonna be buying a Bluetti soon and I want atleast 2000wh but it really sucks knowing I already have the battery on my og Sherman but no way of using it as a backup. Excellent video, hoping to get this wheel in the spring.

[@TroubleshootGamingMeds]

Wish I could afford one, but a buddy of mine owns one that I've ridden a couple times. It's such an incredible wheel! Gokus nimbus cloud for real.

[@KTU-Rides]

Use a blowdryer for adhesive backing! makes it easy to separate the paper back vs adhesive!

[@Townie9225]

👀 @ 3:01 Can’t wait for that review!

[@Andrew-vt4jt]

It's a beauty!

[@kaygee1623]

Very nice unboxing experience and ride.

[@freshlycharged]

Glad you liked it

[@mikeintampa250]

Hey guys, great wheel and great review, but you have to get a ramp to save your backs.

[@freshlycharged]

Got one that you can recommend?

[@GiffysChannel]

your logo is brilliant lol

[@Fertux]

Is it possible if you could review the Dualtron storm limited that would been very nice if u could🙏. Anyways i love your’e videos keep up with the Good work👍

[@Papalou1234]

Hey Jimmy and Andrew if you ever remove the paper out from begode pads faster us a olfa exacto blade and grab the paper corner with the blade and youre thumb it goes quick😉

[@todd6888]

Gotta hand it to Begode! They push the boundary of the profit they can make and what they can get away with.

[@RayVi5ions]

Make my EUC a back up battery for the house and I’m sold

[@Baileybites365]

How’s the Rivian doing!

[@EverlastingEclipses]

Besides the total design failure and unboxing experience. The power it has is spectacularly amazing!!! I'd ride the shit out of this wheel if i were given choice! But my wheel is Sherman S. and so i really don't think I will need another wheel for the next several years.

[@freshlycharged]

The Sherman S seems pretty amazing!

[@Nemonurwingy]

Looks pretty cool, too big for me I think. I have a V8S and an EXN, and I use the V8S more for actually doing stuff just because it’s so much easier to deal with. This thing is 15 pounds more than bringing both the V8S and EXN together. Crazy, but I’m sure it’s fun to ride.

[@freshlycharged]

You quickly get accustomed to the size over time and then you eventually find yourself missing the power, speed, and suspension when riding other wheels.

[@Nemonurwingy]

I think it depends on where you ride. For pure fun rides, I’m sure you are right. I run errands or carry it up stairs to a train platform or onto a bus many of the trips I ride. EUCs are not legal past 25 mph here, so there’s diminishing values getting a super fast wheel for me. I got the EXN for cheap, even it is more than I’ll likely ever use regularly. I would like suspension eventually, but that’s not a deal breaker.

[@freshlycharged]

@@Nemonurwingy good point 👍

[@stevescott5858]

Looks like the ultimate long range street machine

[@bookmark2846]

That much lithium ion would make you feel like you are riding with a small thermonuclear device between one's legs. If anything goes wrong, it is gonna go out in a blaze of glory. They should add an AC outlet so we can brew coffee while we are on the road, lol. Would it make sense to have an LFP option for those who prioritize safety over range?

[@Patkilla7558]

Sheesh. 134.4v? 4800 wh? You can probably power your home with this EUC. Seems so powerful.

[@bosunhawk]

For the internal plastic covering, push a knitting needle or thin rod and lift. Saves ages of losing that angle while lifting with fingers.

[@Andrew-vt4jt]

Great tip!

[@outerheaven2k7]

This is my next wheel

[@freshlycharged]

Love it!

[@GiffysChannel]

I hear people talking about the frame twist. DId you experience this?

[@bepriceless]

Shoddy craftsmanship, all the way around.

[@timpriestley8997]

Yep, cheap and thrown together, just after speed and distt, don't care about anything else

[@electrocycle6560]

There’s was a couple segments where it gave me kuji rolls vibes. Lol

[@freshlycharged]

Kuji is an EUC legend!

[@PatVachon]

Yup. VTOL would be awesome!

[@jayformento1235]

When you guys gonna unbox/review the teverun fighter supreme?

[@CrossroadWater]

That clanky suspension makes this wheel a non-starter for me.. having to take the wheel off to remove the inner plastic doesn't help either. Thanks for the video : )

[@Andrew-vt4jt]

It's just 6 Allen bolts to remove the battery packs so it's not that hard.

[@mig6220]

6 screws, and ur done. And the linkage will be updated soon, no more noise

[@dewaynelowery8511]

Man, EVERY time I see a Begode wheel I just think "Garbage craftsmanship". They REALLY need to focus on making ONE high quality EUC instead of pumping out wheel after wheel just to steal another company's thunder. It's the little things Begode.

[@EUCBOY]

Thanks very much 👍

[@truetech4158]

Put a gob of tape over that beepy excessively loud annoyance to make it quieter, Or replace it with a looping sample player that coughs instead of beeps, like the beginning of that snappy black sabbath tune.

[@greenwave819]

We need a solid after-market trolley handle for it seems just about every Begode model! Still my biggest complaint on the EX.N

[@dute007]

Easy 150 - 170 miles real world range on convervative ride, What do you think sirs? 🤔 Hopefully you guys do a vid on it, a conservative and a blast ride...

[@firstlast9813]

2023 needs a 70 mph capable EUC

[@freshlycharged]

😅 if any company is wild enough to do it, it’s Begode… I’d be happy just to see easy peel adhesive in 2023!

[@firstlast9813]

@@freshlycharged It wouldn't have been hard to use velcro or have screw holes

[@nicholasmilton1902]

Pedal dips in corners?

[@gtasandman]

Segway GT review coming up lol

[@freshlycharged]

Stay tuned!

[@AISuccessTribe]

Use an exacto knife to poke the corner off sticker backing bros.

[@majki6262]

any new high end e-scooters?

[@BigBoyElectricToys]

Which EUC do you recommend for some 270+ over 6ft? Would love to get into these love the videos!

[@mig6220]

This one. For ur first wheel- it may be a bit much. It's the heaviest on the market. I'd get a mid range non-suspended wheel to learn on.

[@BigBoyElectricToys]

@@mig6220 thanks for the help! I'll look into something in that range for starters.

[@teddy_123.]

Nice bro

[@benjaminjonah3214]

Bro how much I need Ole one am from Ghana Africa

[@RTS_2008]

This wheel looks great, but the size alone is such a turn off for me. 118 pounds is crazy! I have a master and a Sherman, and I honestly can’t imagine riding something that’s 30+ pounds heavier than those wheels.

[@TheDownloader86]

Guys this wheel is already obsolete, now there is ugly V2 version :D

[@helmuteckert9161]

Wenn man eun begode Rad Besitz, ist es immer nach 6 Monaten alt. Werden scheinbar nicht für längere Tage vorgesehen, Leute kauft euch alle 6 Monate ein neues begode Rad. Das ist der Wunsch vom Hersteller,( begode.)

[@freshlycharged]

🫤

[@dcscreenworks]

It's already ugly in this version. I'll take the V13, any day...

[@mig6220]

It's a minor update. The parts u need will fit the V1, and will be available soon.

[@deridionentertainment]

10:00 how about instead of wasting 20 minutes on trying to remove the tape guy use a small sharp tool like a small scissors or blade to get in between the tape and the cover. Kind of common sense but IDK even the shovel on your wall lol will be better than your hand

[@Zetler]

Imagine hitting a pot hole on that thing at 50 mph 😳

[@pacochawa2746]

If I had the money is the only thing stopping me lol.

[@eBoard3R]

⚡🤙🏼⚡

[@firstlast9813]

Married for over 20 years with 4 kids? I thought you were 28-34!

[@freshlycharged]

You make me blush! 😊

[@-COBRA]

this build quality is awful. It's like all factory workers went to holidays, so the management took first people from the streets to build this.

[@grb1969]

This begs the question, why not market these wheels as portable or backup generators and get the power company/tax subsidies like Elon likes to pimp? Or even just an elaborate karaoke machine... oh yeah, no speakers.

[@JonahHax]

you should have left the plastic on the battery boxes for 50% improved strength.... Is anything NOT broken on that wheel? AND it came with a checklist... facepalm.jpg

[@mach16j]

This wheel is already outdated

[@mig6220]

Minor update. Parts will be available soon. Alien Rides will have all the upgrades to retrofit

[@dirt.surfer]

Thanks for the video guys. Can't get excited for begode eucs I'm sure the ride and mechanics is alright but the build quality is crap and a new version well be out in 3 weeks.