UNDER $150 Soldering Iron: Aixun T3B w/ T210 Handle Review. Is It Worth It? Better than Hakko & JBC?

  Рет қаралды 41,456

VCC Board Repairs - Jesse Cruz

VCC Board Repairs - Jesse Cruz

Күн бұрын

Пікірлер: 112
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
I hope my jumpers weren't too ugly for you guys 🙈🤣 Don't forget to buy the station here: bit.ly/3tCVOe7
@mr_mnky
@mr_mnky 2 жыл бұрын
what size jumper wire do you use for this type of repair (and for flex cables & such) ???
@peterspiegelenburg4262
@peterspiegelenburg4262 2 жыл бұрын
There are some serious problems with the SSL of the webshop. When I replace the https by http my Asus-router tells me the website contains malware.
@u-hi5
@u-hi5 Жыл бұрын
0.01 mm not insulated wire, above red uf mask
@belaircomputerguyllc4001
@belaircomputerguyllc4001 Жыл бұрын
Just arrived today. I CANNOT BELIEVE HOW AMAZING THIS MACHINE IS. It blows my Hakko out of the water. A true pleasure to use. Thanks!
@VCCBoardRepairs
@VCCBoardRepairs Жыл бұрын
Amazing 🔥
@ItalianRetroGuy
@ItalianRetroGuy 2 жыл бұрын
I've been using the T3A T245 for a year now and it's all been working right. Only issue is that if you somehow ground the tip to any ground that isn't the station's, or insert it improperly, it starts glowing red hot as it heats up to center-of-a-star temperatures. That has ruined a tip for me, waiting on a tip tinner so I can try to resurrect it.
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
Oh wow! Ill have to keep an eye out for that
@ItalianRetroGuy
@ItalianRetroGuy 2 жыл бұрын
@@VCCBoardRepairs might have been fixed so don't necessarily need to worry about it
@NigelB-cz9bz
@NigelB-cz9bz 2 жыл бұрын
I have to say I like the Aixun tools. I recently purchased the Aixun iHeater Pro for all Iphone models from X to Iphone 13 pro max for only £168 UK pounds, and it really works a treat. Very impressed with this soldering iron too, seems to be doing the job just fine. I too use Hako and still have it, but changed to Sugon T26 which is another great unit, which is another cheaper unit. Aixum seem to be very good, so lets hope they have longevity too. Thanks for the Video Jesse.
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
Oh that's cool. I'll have to look up their other Aixun tools.
@calciumcarbonate9877
@calciumcarbonate9877 2 жыл бұрын
Hey, That's great stuff! Do you mind linking me fo where you grabbed the set? The price is quite good.
@shiftctrlhack
@shiftctrlhack 2 жыл бұрын
I use the T3B C115 & C210 pencil with great results. You definitely want to get genuine JBC tips and you will see a noticeable difference it how well the heat transfer is. I work on laptop and tablets on a daily basis. I also have a JABE UD1200 with the JBC C245 handle and tips. I purchased these a few years ago when I was on a budget and since they all work so well I have never needed to upgrade to the " HIGH END MODELS ". I don't really see a need for it. I even purchased the JBC C115 pencil holder to hang my C115 pencil instead of putting it in the T3B holder. You have to do a slight modification but it works really well.
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
I will definitely be trying a genuine JBC tip once one of these fail. I have the iron cable attached to a zip tie on my shelf, so it's out of the way
@grininventor
@grininventor Жыл бұрын
What do you think of the Jabe station ? How does it compare to the Aixun T3B ?
@VCCBoardRepairs
@VCCBoardRepairs Жыл бұрын
No idea. Never used it
@grininventor
@grininventor Жыл бұрын
@@VCCBoardRepairsI was asking the other guy but thanks for the answer though 😂
@Rapid-eraser
@Rapid-eraser 2 жыл бұрын
JBC tips have deferent resistance (about ~1ohm less from the Aixun provided) in the tip and you have to recalibrate the station to offset the temp difference.
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
That's good to know! Thanks for the tip (no pun intended)!
@Rapid-eraser
@Rapid-eraser 2 жыл бұрын
​@@VCCBoardRepairs I wish Aixun would provide for both T3A and T3B more ouf of tips (Aixun branded) there is a plethora from other fendros for T245 but for T210 tip only the 3 types that came with the station are available :( Original JBC tips looks like they are working ok, but at a premium higher price.
@techdoc.repair
@techdoc.repair 2 жыл бұрын
I've been eyeing this station for a while. Currently using a KSGER t12 station with an aluminum handle along with a weller 1010na. Both are good but I love tools lol. You may have convinced me to pull the trigger. Nice review thx. Also, I think the curved tip is not meant to solder with the tip, you are supposed to hold the elbow down and hold a blob of solder on the elbow and drag solder over contacts. works great that way.
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
Yes, I've tried using the "elbow" of the curved tip & still nothing. I normally use the J tip for my Hakko and know very well how to use it. Maybe I just have a bad J tip for this T210 handle.
@travisfrost6508
@travisfrost6508 2 жыл бұрын
@@VCCBoardRepairs I've had a couple j tips that just won't hold solder on the elbow also so you must've gotten a lemon. Pretty annoying>.
@RandomUser2401
@RandomUser2401 2 жыл бұрын
I really wish they would ship it with larger tips. These are nice for micro micro microsoldering but even working on a 0402 you the to the limit of their heat output.
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
I haven't had any issues with small components. I actually don't really use the iron to install components. that's handled by my hot air station.
@super_tech
@super_tech 2 жыл бұрын
Nice review Jesse👌👍
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
Glad you liked it
@lallyji8051
@lallyji8051 Жыл бұрын
love your vids man. you explain things so well
@VCCBoardRepairs
@VCCBoardRepairs Жыл бұрын
Glad you like them!
@orfeous
@orfeous Жыл бұрын
You can upgrade the firmware via computer as well and also customize screen with aixun software! :) I might order this one. Looking for a soldering station that are kinda allround. Some generic PCB through hole soldering, and cables and plugs and stuff. 100-200 euro i think would suite me. No everyday use. Just time to time. Using a Velleman VTSS30 today. Really old and outdated. Theres no accessories for it. But shipping here to Sweden seems to always be expensive from many places. Sometimes the shipping costs same as the product or twice as much so it wont be worth it :)
@VCCBoardRepairs
@VCCBoardRepairs Жыл бұрын
It's an amazing Iron. Still using it today.
@orfeous
@orfeous Жыл бұрын
@@VCCBoardRepairs cool! Did you know that you can update the firmware on this via computer? :) you can also customize the screen via their software on pc. I might order this one actually. But you never know if there are a new/other model on it's way that's better/improved :)
@kaiserkhalil1
@kaiserkhalil1 2 жыл бұрын
I still use old 936 soldering iron 🤣. NICE REVIEW 🕺
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
I haven't heard of the 936. is it any good?
@kaiserkhalil1
@kaiserkhalil1 2 жыл бұрын
@@VCCBoardRepairs its a old style soldering iron with transformer and alot of soldering tips specially if u work with pure copper tips. These new soldering irons are good but i started working with 936 so it suits me and its cheap 🤣
@JohnWilliams-zo5jf
@JohnWilliams-zo5jf 2 жыл бұрын
Thanks very much for the video. I will definitely get one
@spartan456
@spartan456 Жыл бұрын
Hey Jesse! I had a question about this station. I've heard the T210 handle is capable of accepting legit JBC tips. I was also wondering if the station itself could interface with a legit JBC holder and handpiece? I've already ordered one of these stations as I need to teach my new coworker how to tackle a lot of this soldering stuff, and I figure he can learn on the FM-202 while I use the AiXun. But the issues you pointed out with the holder do sound quite frustrating, so I was wondering if using a legit JBC holder would also work?
@VCCBoardRepairs
@VCCBoardRepairs Жыл бұрын
It can do jbc tips Not sure about the stand
@spartan456
@spartan456 Жыл бұрын
@@VCCBoardRepairs Thank you! As an added note, it looks like they may have resolved the tip cleaner issue on newer iterations of the T3B. I just got mine, and the whole tip cleaner is sitting quite firmly in the handpiece cradle. It's still removable of course, but it doesn't at all pop up like yours seems to in this video while cleaning. I am very pleased with the station, and the fact the handpieces work with legitimate JBC tips is awesome. This is a very good station for the price! My one and only complaint is the foam grips! These suckers were an absolute PAIN to get installed on the handpiece. I feel the whole process would have been MUCH easier if the handpiece were slightly altered and featured a fully removable cable on the handpiece itself. I kept thinking "man, if I could slide this UP the handpiece, it would be a lot easier."
@MDTrepairs
@MDTrepairs 2 жыл бұрын
Thanks... Wonder if I'd still need two of these to replace my FM203
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
It did for me!
@tasuwer1
@tasuwer1 2 жыл бұрын
I am 100 percent it still can not beat jbc, but it definitely gets the job done ✅
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
I haven't used JBC before so i have no way to compare. But i'm sure the original works great.
@MrRawUK
@MrRawUK 3 ай бұрын
What is the difference with the handles such as T210 and T245? Is it just cosmetic or where the grip is or is there more technical explanation? thanks.
@VCCBoardRepairs
@VCCBoardRepairs 3 ай бұрын
The size
@jeffdughman9741
@jeffdughman9741 2 жыл бұрын
Im going to buy one for my micro set up, hope this one is relieble, need it to last long enough for me to save up for a full JBC SYSTEM. do you think this will hold up for a year brotha? and great job on the video, thanks for all the effort you put into these vids :)
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
I don't see why not. It's been working fine for me since i recorded the video.
@jeffdughman9741
@jeffdughman9741 2 жыл бұрын
@@VCCBoardRepairs Sweet thanks brotha !
@SlingshotGamer
@SlingshotGamer 2 жыл бұрын
Great video! Definitely going to order one. Did you calibrate the tips or were they working out of the box? Do you have a coupon code for the order?
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
I didn't calibrate it until after the video, but it worked great without calibrating. You can purchase the Soldering Iron Kit here: bit.ly/3tCVOe7
@belaircomputerguyllc4001
@belaircomputerguyllc4001 Жыл бұрын
Just ordered. It was $151 including expedited shipping!
@chinaphonefixteam6300
@chinaphonefixteam6300 Жыл бұрын
High Quality JC AIXUN T3B Soldering Station with different types iron tips for mobile phone motherboard BGA CPU IC soldering repair. The world’s first 200W Full Intelligent soldering station
@naidol
@naidol Жыл бұрын
T3B is 95W, not 200w. So you don't even know the specs of what you are selling. The T3A is 200w but you cannot use 210 and 245 handles interchangeable. You have to buy the separate stations or the T420 model.
@mihailsjakovlevs6497
@mihailsjakovlevs6497 6 ай бұрын
Could you please check if the T3B station has the issue when the tip touches ground (i.e. mains earth) while soldering as reported on the T3A? And also if there is voltage on the tip while operating (also reported on T3A). Thank you!
@VCCBoardRepairs
@VCCBoardRepairs 6 ай бұрын
i never experienced any of those issues
@nidusa1
@nidusa1 2 жыл бұрын
could you use Aixun T3A 245 station with genuine JBC 245 handle, are they compatible to connect JBC handle to it? thanks
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
I have no idea.
@anonym6391
@anonym6391 4 күн бұрын
Nidusa1 have you found the answer to that question? I am also interested to know if they are compatible.
@jumanjimedia6324
@jumanjimedia6324 Жыл бұрын
Where do you get the microscope light
@brycond809
@brycond809 2 жыл бұрын
I'm really interested in this station. I see it is also available with the T115 Handle, what's the difference?
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
It looks like the T115 is a larger iron with larger tips. So for what I do, I don't really need a larger iron. Although I haven't tested it personally.
@limebulls
@limebulls Жыл бұрын
How is it compared to the FX951? This is the on I have
@VCCBoardRepairs
@VCCBoardRepairs Жыл бұрын
Aixun is much better
@limebulls
@limebulls Жыл бұрын
thank you@@VCCBoardRepairs ! And would you suggest to buy the "original" jbc tips or will the standard tips from aixun do the job nearly as well?
@VCCBoardRepairs
@VCCBoardRepairs Жыл бұрын
The Aixun tips work well. JBC Tips are nice too but expensive
@TheArifgigani
@TheArifgigani 2 жыл бұрын
your microscop is very good wich name and company is in your microscop??
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
Parco Microscope: amzn.to/3362K9t
@nidusa1
@nidusa1 2 жыл бұрын
is it better to go with C210 system or get the 245 system and use small tips with that?
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
i'm not sure. i guess that would be a preference thing & the types of devices you work on.
@catharperfect7036
@catharperfect7036 5 ай бұрын
C210 is really for fine work rather than general soldering. I got both.
@EQUID
@EQUID 11 ай бұрын
Im sold and wanted to place an order but noticed its not a local order. How long did it take for your order to arrive?
@VCCBoardRepairs
@VCCBoardRepairs 11 ай бұрын
Very quickly of you pick express shipping. Injured Gadgets also carries it in the USA
@samsong2163
@samsong2163 2 жыл бұрын
Thats good i like tools review Can you test Quick 861dw vs Atten st 862
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
That would be a good idea! I'll add it to my to-do list
@samsong2163
@samsong2163 2 жыл бұрын
Thank you
@emreozturk4053
@emreozturk4053 2 жыл бұрын
What is difference between t210 and t115 tips?
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
I believe the T115 handle & tips are larger.
@brycond809
@brycond809 2 жыл бұрын
@@VCCBoardRepairs This is strange. I read elsewhere that t115 is smaller than the the t210. If true the t115 should be ideal for iphones.
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
@@brycond809 Maybe! i am not sure
@catharperfect7036
@catharperfect7036 5 ай бұрын
115 is for incredibly small work. They're what the JBC nano rework station uses.
@Sherifone78
@Sherifone78 Жыл бұрын
15:00 where to find colorizer microscope light ?
@VCCBoardRepairs
@VCCBoardRepairs Жыл бұрын
check here www.vccboardrepairs.com/gear
@experttechnicianfix
@experttechnicianfix Жыл бұрын
Sugon t26d please...
@f4funks
@f4funks 2 жыл бұрын
Qual o modelo desse micro??
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
Sorry, I don't understand
@TonyToneFixMyPhone
@TonyToneFixMyPhone 2 жыл бұрын
Why when I can have a JBC for $2,000? LOL : ) And at $50 per tip I've spent $8000 on tips alone LOL !!! hahaha
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
hahahah i know right
@pcvitamins
@pcvitamins 2 жыл бұрын
Parco vs amscope !!
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
That's on my to-do list! but good reminder. thank you
@Empirelyrics_
@Empirelyrics_ 2 жыл бұрын
Beleza amigão!
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
Thanks for watching!
@samsong2163
@samsong2163 2 жыл бұрын
Also next time we can do discord server
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
I don't have a Discord server.
@rajputgamingyt00
@rajputgamingyt00 2 жыл бұрын
TOP
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
Thanks for watching!
@AkKa-sx6bz
@AkKa-sx6bz 2 жыл бұрын
vlw guerreiro
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
Thanks for watching!
@ameliabuns4058
@ameliabuns4058 4 ай бұрын
This station isnt ESD safe as a warning.
@VCCBoardRepairs
@VCCBoardRepairs 4 ай бұрын
Okay
@zxrjimmy1
@zxrjimmy1 2 жыл бұрын
I never have any luck with fake JBC tips, always fail,
@VCCBoardRepairs
@VCCBoardRepairs 2 жыл бұрын
Ill have to try a genuine JBC one day!
@zxrjimmy1
@zxrjimmy1 2 жыл бұрын
@@VCCBoardRepairs yes that's what I use everyday, the knife tip and bent one,
@mosparkmore6340
@mosparkmore6340 Жыл бұрын
Love ur videos i do repairs in Melbourne and i learn a lot from ur videos . Wish we could chat on wttsapp and share experience
@VCCBoardRepairs
@VCCBoardRepairs Жыл бұрын
I really appreciate your support. Thank you so much
Aixun T380: The Ultimate Microsoldering Tool or Waste of Money?
28:12
VCC Board Repairs - Jesse Cruz
Рет қаралды 3,3 М.
Aixun T3B Обзор паяльной станции
42:27
Рома Кузнецов
Рет қаралды 33 М.
小蚂蚁会选到什么呢!#火影忍者 #佐助 #家庭
00:47
火影忍者一家
Рет қаралды 126 МЛН
IS IT WORTH IT? New Dual Solder Iron Aixun Soldering Station T420D Unboxing Review
35:59
VCC Board Repairs - Jesse Cruz
Рет қаралды 9 М.
Popping a 5000A Fuse
18:42
Photonicinduction
Рет қаралды 6 МЛН
Soldering station technology & the lie of "SOLDERING PATRIOTISM"
20:48
Louis Rossmann
Рет қаралды 136 М.
The Best Practice Routine for Beginners. Learn to Reball & Run Jumpers. Microsolder Training.
52:31
Is the Aixun T3A a good T245 soldering station?
35:12
Tony359 | Tony's Tinkering Shop
Рет қаралды 27 М.
Best hobby soldering iron? Pinecil vs. Miniware, Hakko, Weller and Ersa
24:57
Made with Layers (Thomas Sanladerer)
Рет қаралды 756 М.
Four Steps to Flawless Wire Joints (How to Solder)
11:45
Will Donaldson
Рет қаралды 468 М.
Repairing An AIXUN T3A soldering station
32:56
Buy it Fix it
Рет қаралды 58 М.
小蚂蚁会选到什么呢!#火影忍者 #佐助 #家庭
00:47
火影忍者一家
Рет қаралды 126 МЛН