Priming with my R500 LVLP spray gun

[@joeyyates1366]

One of the best painting KZbin channels out there

[@ekginseng]

yeah because not everyone has 5000$ for a three phase air compressor 120 gallon and seperate iwata guns for each coating u use

[@UndergroundPaintKing]

Appreciate that Joey🙏🏽 I hope the channel is helpful!

[@UndergroundPaintKing]

Definitely don’t need all that to get the job done!

[@jayp9450]

True dat homie by far. 🤙🏻

[@UndergroundPaintKing]

@@jayp9450 appreciate you!

[@gabrielgonsoulin8150]

I just wanted to say thank you upk. You motivated me to paint my own car. I ended up painting it black in my garage with a spray it 33000. It came out flawless.

[@UndergroundPaintKing]

Awesome 💯that’s what I like to hear and I’m glad I could help in any way Gabriel!

[@oopspaint]

The UPKING always talking, but always showing good and correct/ smart ways of doing things!

[@UndergroundPaintKing]

Lol I try to at least have some information for my people if I’m gonna be doing a lot of Talking Oops Paint!

[@rcs0296]

for just primer, I leave the hard cup on it,but for paint the spectrum system is awesome and fair priced,thanks for the video UPK

[@UndergroundPaintKing]

I agree with you Richard that’s a good way to go, appreciate you checking out the video!

[@iitsED]

@@UndergroundPaintKing best way to clean out the hard cups?

[@UndergroundPaintKing]

@@iitsED the hard cup is good for primer and I like using the disposable cups when doing base and clear

[@iitsED]

@@UndergroundPaintKing yes, was just curious of your method of cleaning the hard cups so I’m not wasting too much lacquer

[@UndergroundPaintKing]

@@iitsED I honestly don’t have a better way of cleaning the hard cup other than lacquer beyond replacing the hard cup with disposable cups which saves you on not having to clean the cup and only having to clean the spray gun

[@frankrodriguez1977]

Love these LVLP projects. Im going to order that 1.7 for high build. Thanks again UPK

[@UndergroundPaintKing]

You’re welcome Frank and I appreciate you checking out the content!

[@SmokeyA55]

Looks like a good primer gun for the price UPK thanks for video

[@UndergroundPaintKing]

It worked great Jonathan and for the price it’s hard to pass it up! Appreciate you checking out the video

[@mr.404atl2]

Thanks for sharing all the footage and your years of knowledge.

[@UndergroundPaintKing]

You’re welcome Mr. 404 I appreciate you checking out the videos and I hope they are helpful!

[@iitsED]

Awesome!! I have the 1.4 & 1.3 because of you and I’ve been having great results!! Time to pick up this 1.7 for primer, so I can get rid of that purple harbor freight. Thanks as always for the knowledge 💯

[@UndergroundPaintKing]

You’re welcome Edwuar, you’re gonna have a nice spray gun setup once you get that 1.7💪🏾

[@yeayeasautoadventures1161]

take a 1/16 (1.6mm) drill bit from inside to outside on the purple gun,save yourself the 70 bucks or buy another 1.3 gun

[@borna430]

Thanks King for another great video. you're the Michael Jackson of spray painting. Your movement is as sleek as Michael Jackson's moonwalk.

[@UndergroundPaintKing]

😂 I’ve never been compared to Michael Jackson before 💯 I appreciate that Borna🤝🏾💪🏾

[@garethenzor7146]

Looks great to me. Enjoy watching. Thanks

[@UndergroundPaintKing]

Thanks for checking it out Gareth!

[@karsbkool]

Hey King. I got one of my R500s back from my buddy Nacho today. His helpers had got I all clogged up and just dropped it in the middle of his disaster area paint table where it laid for 3 months. They spilled primer on it. They spilled basecoat on it. They spilled clearcoat on it. I'm not bullshitin'; it took a screwdriver to pry it up off the table. I had to use pliers to get the air cap off and turn the knobs. I couldn't even pull the needle out with pliers! After hours of soaking and scraping and brushing I put it back together with my spare 1.3 set, and it looks pretty good and sprays like new. Takes a beatin' and still does it. I cleaned up the 2.0 set I pulled out of it. I'll send it to you if you want to check out a nozzle for thick primer.

[@UndergroundPaintKing]

I’m really impressed with this spray gun because I’m waiting on it to fail but it hasn’t failed me yet! I would definitely like to check out the 2.0 set Kenlycan

[@karsbkool]

@@UndergroundPaintKing if you soak an HF purple gun in thinner for hours, you might as well throw it away... I use the 2.0 gun for primer nearly every day. It looks rough but sprays great. Let me know where and I'll get that tip set on its way to you.

[@UndergroundPaintKing]

@@karsbkool email me at [e-mail]

[@100amps]

I bought the SprayIt version of this gun a while back but haven't used it yet. It did well on your Corvette, so it should do well on my Corvette too. I don't have your skills, so I'm glad you showed it in action, and how to use it. Thanks man!

[@UndergroundPaintKing]

You’re welcome and good luck on your project 💯

[@darrellsomers5427]

I think that air compressor is as hot as hell but if it works it works and the compressor seems to be able to take it love your video's great info

[@UndergroundPaintKing]

Thanks Darrell, I really appreciate you checking out the videos, and I don’t really use the compressor until I’m ready to paint so i definitely work it hard but it’s only for a short period of time

[@jamesmulready4119]

Thanks to you , I have one ordered . Hopefully I have the correct adapters coming too. Got me inspired

[@UndergroundPaintKing]

Glad that the channel could be helpful in any way James 💯

[@oopspaint]

Wow… that laid the primer down very nicely! I’m surprised ! I may have to look into that little gun.

[@UndergroundPaintKing]

I really have been using these spray guns a lot to see when they will fail and I’m surprised because they haven’t failed me yet so they are definitely worth the money in my opinion

[@nathanielbolden5053]

Not bad at all!…I’m gonna get both guns!…and paint my own damn car!

[@UndergroundPaintKing]

Yessir 💯 you can do it bro 💪🏾

[@Grant7]

Primer makes everything look better!!! Good job my man...

[@UndergroundPaintKing]

Wish all I had to do is prime everything and my job would be easy lol…appreciate Grant for checking out the work!

[@386Clarke]

Looks good Champ! It’s nice to see that Vette getting some work done. I know you’ll take good care of it. Be well.

[@UndergroundPaintKing]

Thanks Matthew, it’s been a long time coming for the vette but I’m gonna do my best to get it right…I appreciate you checking it out! Be well Fam

[@mikeammargon6847]

Good work bruh......... the Sprayit and also the Eastwood LT100 is the same gun..

[@UndergroundPaintKing]

Thanks Mike I appreciate you and I haven’t had the chance to try the Eastwood but I knew they were the same gun from different ones telling me💪🏾 appreciate you checking out the work!

[@bracsim]

You have come a long way, good things coming to you, you deserve it, keep up the good work.

[@UndergroundPaintKing]

Thanks Bracsim I appreciate that and appreciate you supporting the channel!

[@jerem0621]

I hear the intro…I smash the like button!

[@UndergroundPaintKing]

Greatly appreciate you Jeremiah and I hope the channel helps!

[@braindead_entertainment]

Love the content man! Appreciate all the effort

[@UndergroundPaintKing]

Glad to hear you’re enjoying the channel and I hope it’s helpful!

[@braindead_entertainment]

@@UndergroundPaintKing we will find out this week haha

[@UndergroundPaintKing]

@@braindead_entertainment good luck!

[@braindead_entertainment]

@@UndergroundPaintKing thank you!

[@pstreetgarage7304]

Very satisfying to watch. It looks amazing.

[@UndergroundPaintKing]

I was having a good time spraying it P Street, appreciate you checking it out!

[@Snell2K]

Great video UPK! I used that same setup to spray high build primer and it too turned out great like yours. Can’t wait to see the finished product 👍👍

[@UndergroundPaintKing]

Thanks James I appreciate you checking it out and your project turned out great 💪🏾💯…I’d like to showcase it on the channel if you wouldn’t mind!

[@Snell2K]

@@UndergroundPaintKing I would be honored to be showcased on your channel!

[@jamesadams3476]

Great video upk I like how you always try different spray guns and tools. Reviews are very informative. Also you know I have been waiting for a update on the vette. Keep up the videos my friend.

[@UndergroundPaintKing]

Thanks James I appreciate you and will keep the videos coming!

[@Rivierars]

Damn that gun sprayed primer smooth 😳 bad ass and was probably like $70 another winner UPK

[@UndergroundPaintKing]

It did a great job Ramon and you’re right, at $70 you just can’t beat it!

[@bear_vibes5130]

Also caught your last video. Toilet paper works great.

[@UndergroundPaintKing]

I’ve had a few people say the same thing!

[@jayinmi3706]

Looks like it went better than on the Camaro. No drips. Looks great! I shot my sealer today and had runs from hell. Back at it tomorrow.

[@UndergroundPaintKing]

It definitely sprayed better than with the Camaro, what caused the runs?

[@jayinmi3706]

@@UndergroundPaintKing not 100% sure. I was shooting it at about 25ish psi in my HF HVLP gun with a 1.8 tip. When i checked the data sheet it suggests 25-40psi for a gravity feed gun (which it is) but it says 8-10psi for an HVLP gun, so maybe the air pressure was too high? I got some orange peel in it as well, so I'm probably going to go over it with 400 or 600 before I lay paint. At least I didn't have any obvious dings, scratches or sanding marks...better to find that out with cheap sealer than paint. You think pressure might be the issue? I was doing about 50% overlap, fan height was probably 8 or 9". Thanks! Paint is going on with the SprayIT.

[@UndergroundPaintKing]

@@jayinmi3706 if you were using a HF spray gun, chances are you needed the pressure up higher, those guns have been known to spray better around 40 psi

[@jayinmi3706]

@@UndergroundPaintKing OK.I'll try that. It is came in a set with a touch up gun. It isn't the purple gun. Hard to figure out when I see people spraying at one psi, the. data sheet suggests another, etc. Thanks for the advice.

[@UndergroundPaintKing]

@@jayinmi3706 let me know how things go, I’ve used those spray guns before

[@lynntankersley4837]

I really enjoy your videos. Do you paint Harley's with some of the cheaper guns like the ANI F160S?

[@UndergroundPaintKing]

@@lynntankersley4837 I don’t have a ANI F160 but I do have other cheaper spray guns that I use to paint motorcycle parts with

[@charlesclemons741]

What up King! I'm finally about to paint my 75 Vette. I'm going to use Speedokote Urethane High Build. The TDS says use a 1.3 tip but it sounds like that's a pretty small tip. Should I use the 1.3 on my Sprayit gun or should I use a larger tip? As always, great content brother! Keep it coming...

[@UndergroundPaintKing]

Glad to hear that you’re ready for paint Charles 💯 if you have the option, I would test the 1.3 tip and see if you like how it sprays the primer and if not you can move up to a bigger tip size. Good luck on your Corvette 💪🏾

[@danamcintyre3565]

It's hard to tell on photos or videos but they are good guns for the money. They only thing it's a slow moving gun, and if your like me it's hard to reach out like that for long periods of time. They are great for small compressors and they don't create a ton of over spray.

[@UndergroundPaintKing]

Yeah having to reach out for a long period of time could become a issue if you have to do it a lot

[@danamcintyre3565]

@@UndergroundPaintKing Yes not only that I'm vertically challenged if you know what I mean.

[@UndergroundPaintKing]

@@danamcintyre3565 lol I am as well 😂

[@LakesideAutobody]

Great information UPK - always enjoy your paint tips :)

[@UndergroundPaintKing]

Thanks Jerry I appreciate you, have a great week my friend!

[@jraposo911]

Looks good buddy 😊JR

[@UndergroundPaintKing]

Thanks, I appreciate that and appreciate you checking it out 🙏🏽💯

[@ericpecana5529]

Another satisfying and learning video UP champ.. Do you have a up load video for correct ratio for clear coat and primers/ sealer? Thanks 😊 🍻

[@UndergroundPaintKing]

Thanks Eric I appreciate you checking out the video and I do have videos on how to mix paint and primer but I’ll make another video to help out

[@Netnert]

I see that air compressor is no long available at harbor freight unfortunately, what air compressor would be similar from there? Thanks in advance

[@UndergroundPaintKing]

I believe they have a MCGRAW 20 gallon compressor that should work good with a lvlp spray gun

[@josephmartinez8803]

That was the same spray gun that you used on the car that you primed at your house garage. You had issues with it, so what did you do different, between the home job and the shop job, since the shop job sprayed out much better?!

[@UndergroundPaintKing]

I switched cups and went with the cup that comes with it and cleaned it real good and it sprayed great…at the home garage I started with the spectrum pps system and had problems with it and switched to the regular cup and cleaned it and it worked fine Joseph!

[@davegunner2717]

Thank you 🙏

[@UndergroundPaintKing]

You’re welcome Dave I appreciate you checking out the work 💯

[@dm5124]

How do you refill the paint cup in the middle of painting? Do I need any attention to the in progess painting before refilling the paint cup. Do I need to clean the spray gun a little bit during refilling the paint? Your video is excellent.

[@UndergroundPaintKing]

I appreciate you checking out the video and once I run out of material I can either remove the cup from the spray gun and refill it or switch over to a pre mixed cup of material and continue spraying and I don’t clean my spray gun in between refilling, hope that helps!

[@Semiautosoplaya]

You tough my guy I been following you for a while now , I appreciate the knowledge you drop in these videos … do you sand the whole car down before and after priming or just certain spots ?

[@UndergroundPaintKing]

I like to sand the whole car before and after priming. I appreciate you rocking we me🤘🏾💯

[@mikewolfe5917]

I love the videos keep them coming

[@UndergroundPaintKing]

Thanks Mike I appreciate you checking the videos out!

[@mikewolfe5917]

Thanks for the info on the gun

[@UndergroundPaintKing]

@@mikewolfe5917 you’re welcome!

[@carpassion4ever]

Man I've been searching for a channel like yours for months. So glad I came across your channel. I have the same setup in my garage and wasn't too sure if I should take a chance and do a paint job with my 21 gallon AC. @paintsociety said it'll have a terrible result because water would began mixing with the paint from the AC being so small and have to continue to refill. Multiple channels recommended no more than a 25ft air hose. I only have 2 100' air hoses. What are you thoughts on my setup? Can I make it work and get great results? This would be my first time painting a complete car, I've only painted body panels and parts before.

[@UndergroundPaintKing]

I have multiple paint jobs on this channel using the small compressor setup and have gotten great results, I use a 50 ft hose and think a 25 ft hose would work great also but using the 100 ft hose could make things more difficult. There are ways of getting around the water issue while using the small setup so that you don’t have the issue of water buildup in the line while spraying. So with all that being said, you definitely can get great results using a small compressor setup

[@anthonysaoulidis6340]

What are you using for line filtration? Keep up the great content!

[@UndergroundPaintKing]

I honestly just keep my tank drained and a filter on my spray gun and that’s it Anthony…I appreciate you checking out the videos!

[@joewalton2726]

Look good

[@UndergroundPaintKing]

Thanks Joe I appreciate you checking it out!

[@johndosh2469]

Hell yeah!!

[@UndergroundPaintKing]

Appreciate you checking it out Josh!

[@designsinorbit]

Wow, that gun has almost no over spray. Interesting!

[@UndergroundPaintKing]

Very low on the overspray and is a excellent spray gun

[@thelastsamurai5857]

You need bigger compressor bro Good job

[@UndergroundPaintKing]

I have bigger compressors and have painted plenty cars with this small compressor with no problems so I really don’t need a bigger compressor but I appreciate you checking out the video!

[@jamespolucha8790]

This gun should be good for a first time painter don’t you think ? I’m just painting a motorcycle gas tank

[@UndergroundPaintKing]

This spray gun is great for a first time painter James, let me know what you think of it if you get yourself one!

[@husky1239]

Great video upking I am working at the moment with a small compresaer using a lvlp as the corvette the spray gun your using is a great gun for primer I have a question have you ever used a 1.3 for hbprimer and what is your experience on it thank you for all your tips and reviews upking great channal thank you once again

[@UndergroundPaintKing]

Thanks for checking out the video Husky and to honest I have always sprayed primer with a 1.7-1.8 tip so I don’t have any experience spraying high build primer with a 1.3 tip

[@OldJoe212]

Lookin' good Boss. Couple of questions. Do you ever have a problem with the paint drying on the thin plastic covers and blowing off into the wet paint? Also, I know you are going to mix/thin more paint than you're going to use, so how long can you keep it in a sealed jar? As always, thanks for sharing your knowledge.

[@UndergroundPaintKing]

The plastic I use is made for the paint and overspray to land on and stick to so I don’t have a problem with it while painting or priming but if I let it dry for a few days it is possible to lift and get into the fresh materials that you’re spraying, As long as the paint doesn’t use a catalyst/hardener use should be able to put it on the shelf for a long time and it not go bad as long as it’s sealed properly but take into consideration that all products and brands aren’t the same Joe, I hope that helps!

[@nelsonfernandez7473]

Nice video showing spraying primer, do you sand that primer before the the base paint or no

[@UndergroundPaintKing]

Thanks Nelson I appreciate you and yes I sand my primer before spraying sealer or base

[@mellis181]

I have the R500 LVLP spray gun. Is there a safe solvent I can spray to get my spray pattern close so I don't have to waste paint trying??

[@UndergroundPaintKing]

Once you get to the point of painting you can have some paper or cardboard handy and do some quick spray outs to get your pattern how you want it, or just get a similar solvent to what you’re spraying and set up your spray pattern

[@michaelcarr7858]

You didn't have any problem with a press fit lid on the pot ? I found them to leak in the past on a different gun. So went to a screw on lid only.

[@UndergroundPaintKing]

I haven’t had a problem with it yet but I think I would if I tried putting to much material in the cup so I just avoid filling to the top and it seems to work fine, appreciate you checking out the video Michael!

[@shon8088]

Good morning bro! So I found a compressor like yours but it’s the 29 gallon 2 hp one from Harbor freight, got my spray it 33000 on the way so hopefully I’m finna get to it. How long and what length air hose are you using with your spray it gun?

[@UndergroundPaintKing]

Grand Rising! I use a 50 ft hose with my compressor setup 25-50 ft is the best for a small setup Shon8088

[@shon8088]

@@UndergroundPaintKing thanks!!

[@UndergroundPaintKing]

@@shon8088 you’re welcome!

[@garypostell5268]

Is that a epoxy primer sealer?

[@UndergroundPaintKing]

No it isn’t Gary

[@borna430]

Hi UPK, please help a newcomer here. I purchased A610 gun per your recommendation. My question is I am trying to paint epoxy primer with it. I want to know which needle should I use for epoxy primer(1.3, 1.5, or 1.7 mm)? And also what is the good PSI for shooting epoxy primer? Thanks in advance.

[@UndergroundPaintKing]

You can go with a 1.7 tip but check what is recommended by the manufacturer of the primer that you’re using, also check to see what pressure is recommended by the manufacturer and make adjustments how you see fit to work for you

[@borna430]

@@UndergroundPaintKing Thanks for the quick reply. The product Data sheet says HVLP guns: 1.4-1.8mm tip , 8-10 psi (output) Doesn't say anything about LVLP gun

[@lboogie6263]

Another great video. Question. Some say you only need to prime the bodywork areas but sand the whole car. I am guessing it a more uniformed look if the whole vehicle is primed so the paint has something better to stick to right?

[@UndergroundPaintKing]

It really depends on how you do your prep work along with your bodywork, if you do the entire body of the vehicle in 80 grit and leave it at 80 then you’ll want to prime the entire vehicle to block it out and fill in those heavy scratches but if you fix a few spots and prep the rest of the vehicle with 320 grit for example then you could get away with just priming your bodywork areas

[@lboogie6263]

Oh. Ok. That's what it is. Looking forward to seeing your other channel.

[@UndergroundPaintKing]

@@lboogie6263 glad I could help and I appreciate you checking out both channels L Boogie!

[@cwwCADAVER]

Thank you for sharing for all of us the work that you do... I'm going to purchase this gun and getting the one that comes with 1.3 tip, I heard you say that you used 1.7 with the primer.. will 1.3 tip lay down 2k urethane primer ? Will I have to thin it down? If you have the time to reply I most appreciate it.

[@UndergroundPaintKing]

You’re welcome and I appreciate you checking out the videos🙏🏽 Depending on the primer that you go with, the 1.3 might be able to spray it but you would have to check with the manufacturer and see what they recommend. I spray all my primers with a 1.7 tip and I know I’m good unless I’m going with something even thicker and have to go with a bigger tip. Best thing to do is test it out and see if you like the results. Hope that helps!

[@cwwCADAVER]

@@UndergroundPaintKing I'll just buy a 1.7 tip and problem solved...

[@UndergroundPaintKing]

@@cwwCADAVER makes things a lot easier!

[@Jahrome3278]

hi there upk ,so for spraying primer at 28 psi....? is that with full fan and full fluid?

[@UndergroundPaintKing]

Yes sir Malcolm, I always set at full fluid and you can make adjustments on your fam as needed but full fan is a good starting point and then dial it in to your liking if need be

[@Jahrome3278]

@@UndergroundPaintKing oh ok because i did get me one of them spray guns ,havent used it yet.i did see your fan wasnt that wide.which all good.thanks once again UPK for helping out the likes of us.🙏

[@UndergroundPaintKing]

@@Jahrome3278 you’re welcome and we all in this together bro I’m just helping my people out 💪🏾

[@darryll7899]

What primer u use, lays down smooth asf haha

[@UndergroundPaintKing]

Lol I use shop line 2k primer it’s a ppg product

[@bear_vibes5130]

I was wondering what happened to the corvette.

[@UndergroundPaintKing]

Getting close to some paint

[@The88katana600]

Still think the binks #7 is one of the best guns made yea it and I are old school lol.

[@UndergroundPaintKing]

Lol it is one of the best made and many will agree with you!

[@joewalton2726]

Hey another question, where can I get more caps an needle sizes for my gun? I would like to use this gun for all my spraying from epoxy primer through clear coat.

[@UndergroundPaintKing]

You have to buy the kit that comes with the different tips and needles

[@joewalton2726]

@@UndergroundPaintKing do you know where I can get it. I found the kits on Amazon but they have the guns as well. Are there other kits?

[@UndergroundPaintKing]

@@joewalton2726 that’s the only kit so you would have to purchase the kit

[@2koolforyou88]

Do you measure with those hf cups I know they have the numbers on the cup itself

[@UndergroundPaintKing]

I don’t measure with them because the measurements are terrible on the cup so I just stick with mixing cups

[@roblove9744]

Hey UPK.. can you use the lvlp guns for single stage paint?. Like the Speedokote and other single stage?

[@UndergroundPaintKing]

Yes you can Rob, I know of people using it to spray single stage and having great results with it

[@roblove9744]

@@UndergroundPaintKing thank you. I liked and subbed. Learned a lot with your videos!!

[@UndergroundPaintKing]

@@roblove9744 thanks Rob I appreciate you subscribing to the channel and I hope it continues to help!

[@oopspaint]

Was that epoxy or DTM primer? Brand ?

[@UndergroundPaintKing]

2k surfacer from shopline (PPG product)…I appreciate you checking out the video Oops paints and I enjoy the work you put up on TikTok!

[@makinithappengarage1488]

What psi u spray your primer? On a LVLP setup? Thanks

[@UndergroundPaintKing]

I believe it’s in the video when I start spraying the primer, appreciate you watching the video

[@bear_vibes5130]

Hence gravity fed.

[@UndergroundPaintKing]

Appreciate you Bear

[@kilogolfmike8095]

What’s good man I finally got a small compressor but was wondering if I needed a line dryer/filter installed before I sprayed

[@UndergroundPaintKing]

You can use one on the end of the spray gun Kilo

[@kilogolfmike8095]

@@UndergroundPaintKing thank you

[@UndergroundPaintKing]

@@kilogolfmike8095 you’re welcome

[@1984SWM]

Was this 2/1 part

[@UndergroundPaintKing]

Yes I mixed the primer 2:1

[@joaquinmireles3912]

It dud good what color going to be lol

[@UndergroundPaintKing]

It’s going back Red

[@mikewolfe5917]

How much was the spray gun?

[@UndergroundPaintKing]

I believe I paid around $69 for the spray gun and I had to pay shipping so I paid under $90 all together Mike

[@dardenvern]

can that compressor supplied air to do an overall with that gun?

[@UndergroundPaintKing]

Yes it can, I have multiple videos doing overall jobs with it on this channel!

[@dardenvern]

@@UndergroundPaintKing thanks I realized after watching the hummer and Tahoe you painted

[@UndergroundPaintKing]

@@dardenvern appreciate you checking out the videos!

[@joewalton2726]

Hey king, I bought the spray it 33000 spray gun to do my truck with, would the 3m adapter s2c work for it as well? Thank you for all your help so far.

[@UndergroundPaintKing]

Yes sir it will work Joe

[@joewalton2726]

Thanks King, I really look forward to watching all your videos.

[@UndergroundPaintKing]

@@joewalton2726 I appreciate that Joe and I hope the videos continue to help!

[@2flyingbiscuits429]

What psi for 1.3 tip with kustom epoxy primer? Says spray with 1.3-1.4

[@UndergroundPaintKing]

It’s best that you do some test panels first to figure out what you should set your psi at and how you want it

[@2flyingbiscuits429]

@@UndergroundPaintKing I’ve never sprayed epoxy or used Lvlp ….what am i looking for?

[@UndergroundPaintKing]

@@2flyingbiscuits429 you want to spray it without getting a heavy texture, so you want it to lay pretty smooth as best as you can depending on what you’re going for on the project you’re working on

[@realtruth97]

So... If you put the compresor to,,, 100 psi l, let's say. And you're painting. And the compressor goes low? And it turns on. It will fill it to max psi. 😐 So... You're not painting at 100 psi anymore. You're now at max psi. Whatever the number is. Just to put it in perspective.

[@UndergroundPaintKing]

Once you go under whatever psi your compressor is set at to turn on at, and you’re still spraying the compressor will keep running and never get back to the max pressure you set unless you give it time to fill

[@bear_vibes5130]

The vacuum system will kill a small compressor.

[@UndergroundPaintKing]

Are you referring to a siphon feed?

[@robertcharlton1551]

It just goes to show there is not much difference between a more expensive gun and a hundred dollar gun. So you add a spray buddy. Thanks

[@UndergroundPaintKing]

You can definitely get a great result with a inexpensive spray gun Robert, I appreciate you checking out the video!

[@bryanchaney2572]

I have run into a serious problem. I have the sp33000 gun, finally used it the other day. Finished the job I was doing, cleaned the gun, went to put it back together and for the life of me I cannot find the adjustment screw, I call Cal. air tools, they send me to Master tool for parts, doesn't anybody answer a phone any more??? They send me to the forum on their site and there is nothing on the spray guns. Any info on how to get parts, or am I out of luck. Great gun, sprayed a great pattern, but hey, mistakes happen, parts get lost(and if it is going to happen to anyone, it will happen to me, as daddy used to say I would lose my head if it wasn't attached.) I am still aways from actually spraying the vehicle, I was just running a test run with some latex to check it out. Any help would be greatly appreciated.

[@UndergroundPaintKing]

I don’t know of any way to get parts without re-ordering another spray gun Bryan…I’ll try doing some research on it

[@bryanchaney2572]

@@UndergroundPaintKing master tool don't sell parts for any spray guns. Only compressor parts.

[@UndergroundPaintKing]

@@bryanchaney2572 probably have to get another spray gun

[@bryanchaney2572]

@@UndergroundPaintKing I was afraid of that, hopefully it will turn up. When I first too up this project I knew it was going to be a chore, I found out it is more than I first thought. I have a whole new appreciation for people that do this for a living. The painting is the easy part, it has its challenges, but the prep work, that is where the work is at. I am working on my dad's 93 ext cab c1500 gmc, and it had quite a bit of fiberglass work that had to be done. Working on it, it's getting there, and I will get it done.

[@UndergroundPaintKing]

@@bryanchaney2572 it’s always good to get a real understanding of what goes into body and paint work, I know you will do a great job on your project!

[@bear_vibes5130]

Lots of blocking to do. But did decent.

[@UndergroundPaintKing]

Blocking won’t be bad at all, appreciate you checking out the video!

[@joaquinmireles3912]

Spot putty lol

[@UndergroundPaintKing]

What about spot putty?

[@joaquinmireles3912]

@@UndergroundPaintKing you could use it but would have be primer the sealed and painted lol

[@UndergroundPaintKing]

@@joaquinmireles3912 once I fix those areas I can prime them then block those areas and then seal the car and paint it, this is just a high build primer that I sprayed on the car

[@no_more_nyce_guy]

First

[@UndergroundPaintKing]

Appreciate you checking out the video No More Nyce Guy!