Fire testing is often misunderstood. This video gives an overview of furnace testing so that you can interpret results of tests and understand what test certificates may mean.
Пікірлер: 13
@tanzeemazmi5312 жыл бұрын
Could you please share the idea how to pressure make neutral at specific height... As per given different type standard... Such as BS,EN & UL
@firesun2 жыл бұрын
Dear Tanzeem. You need to have constant pressure measurement, and then adjust your outlet opening size, inlet sizes and/or burner operation.
@lehadanceledonferrada40511 ай бұрын
ISO 834-1: 8 Pa per meter heigth of each sample tested.
@tanzeemazmi5312 жыл бұрын
Which material is uses here to fixx unexposed thermocouples please...?? Could you please share the supplier details
@firesun2 жыл бұрын
I think that was a ceramic blanket (i.e. woven glass fibre material). Our outdated code says we should use asbestos which is illegal.
@paneristovski55123 жыл бұрын
Can in some video in future explain how to calculate fire loading on one zone from material what is stored in the zone? Tanx.
@firesun3 жыл бұрын
Have a look at our video on the Eurocode parametric fire. That does a worked example to calculate the time-temperature curve based on the fuel loading in the room.
@tav62442 жыл бұрын
Please advice on the small-size fire furnace
@firesun2 жыл бұрын
There are some papers on small-scale furnaces. They are not perfect in that some performance is not fully predicted. Bigger samples tend to perform worse. However, small-scale tests are useful for understanding behaviour, thermal modelling and preliminary behaviour.
@tav62442 жыл бұрын
@@firesun Could you please share the papers on small-scale furnaces ?
@firesun2 жыл бұрын
@@tav6244 We have not published any papers ourself on the topic. However, in the literature you will find some papers comparing the response between such furnace. In textbooks such as "Structural Design for Fire Safety" it discusses the difference in results between small and large-scale tests.
@TheRafikinfo3 жыл бұрын
Hello, please, I need a topic: Study of the reinforcement of reinforced concrete structures after exposure to fire.
@firesun3 жыл бұрын
Dear GC Structure. We have a video on this channel about the design of concrete for fire. Also, there are a number of good textbooks on the design of concrete for fire (Buchanan & Abu; Wang et al; Naser & Kodur; etc.). Various guidelines for repair are also available. Thanks Richard