Hi Toasty. May 2024 here. This tutorial is still relevant and helpful. Thanks for creating, uploading and sharing.
@GarySchiltz5 күн бұрын
Ubiquiti should forget their own documentation (not really) and point to this video. Seriously helpful!
@TJeremiah Жыл бұрын
Toasty, thanks for these tutorials. I’m an installer, and have sent 100’s of clients your way through the years. I will give them the updated version now. Well done.
@calvinregan1559 Жыл бұрын
This video is awesome. I’m not a “tech” guy and was looking to set up three U6-LR access points. I couldn’t find anything on the internet that had easy directions to set these up - until yours! This really helped me and I have all three set up and working. Thank you!
@sowlvdr Жыл бұрын
I cannot thank you enough for this video. I’ve seen easily another 50 on this subject and yours covered everything everyone else missed. A million thanks!!
@ashaprovocateur Жыл бұрын
This is great. I found you after my installer stopped answering my messages. I've only encountered one major-ish problem using this approach: (1) when setting up the UniFi Network on my MacBook, I followed your advice and did not create a UniFi account. Welp, this just backfired on me because UniFi has locked me out of accessing my devices and says I have to reset them in order to regain access. So while, my system is back up and running.. all that hard work I did lives in a vacuum where it cannot be accessed.
@barrywalker26066 ай бұрын
Hi, just found this prior to installing an AP - really great video and very well presented Thank You! :)
@kenucho0119Ай бұрын
Thanks! Worked like a charm followed exactly as you did. Mac is a tiny different but easy to follow
@user-xs7pl3zu9x Жыл бұрын
Thank you so much for your tutorial. You explained it very carefully and in a manner that was very clear for a novice like me. I managed to set up my unifi nano AP successfully thanks to your guidance. Many Thanks
@yobdez3 ай бұрын
thanks for video very helpful - in the small platic baggy there is a little L shaped tool (spotted it as you were removing the screws) - makes it really easy to unlock the clip to rotate the AP form the bracket
@brentallenoutdoorsfl2 ай бұрын
This was exactly what I needed. 👌👏
@wingnut3578 Жыл бұрын
This video is awesome! It's very helpful. Thanks!
@trone322 ай бұрын
Excellent set up video still using this today
@wa27 Жыл бұрын
FANTASTIC tutorial. Thanks man
@richardsutherland97316 ай бұрын
ThankYou. EXCELLENT. THE best tutorial
@AnasBalghiti5 ай бұрын
Great tutorial man! 👏👏 I was wondering what was the internet speed after this whole process compared to the first speed test you have done before the desktop setup? I would love to optimize my internet speed with my UniFi. Appreciated !
@ThePatsev10 ай бұрын
Great video tutorial! Thank you!
@maikeljimenezmoreira27526 ай бұрын
Great video, it is very helpful thank you a lot.
@elvispressedtalot9899 Жыл бұрын
Explained well
@victorappelqvist73398 ай бұрын
I have a problem with this. I had to reset my Ubiquiti Unifi UAP-AC-LR Roaming-access point AC1300. And it does what it supose to do and the light now is solid white and it is still connected to my edgerouter x. But i can't find it with the app anymore and don't know how to find it. Please help
@artikru253511 ай бұрын
nice totorial! But after I removed the settings on my app of android device it doesn t shows up in my manager divices in browser firefox to set it up throught my desktop pc windows 10☹
@jajoykhan137311 ай бұрын
Bro literally I like your vedios
@quartzsite11 ай бұрын
Thank you, helpful !
@sackreiter1 Жыл бұрын
I have 4 APs I put in years ago. I went to check on the configuration and Network Application I had no longer worked with my browser (Firefox on Mac OS 10.15.7). I downloaded the new version (7.3.83) and when it starts up and I "Launch a Browser to Manage the Network", it asks for a "Username" and "Password" and the ones from my previous version don't work. How do I get the Network Application software back to a startup version and re-adopt these from scratch? Or is there a better way to do it?
@lukasc4534 Жыл бұрын
Very very very very helpful
@valeenoi2284 Жыл бұрын
Question: If I have a Security Gateway in the upstream, and an EdgeSwitch which I plug a Unifi Access point to it, how do I create multiple VLANs for different SSIDs? Do I need to do it on the EdgeSwitch, since the AP is connected through it, or do I need to create the VLANs through the controller, then configure them on the EdgeSwitch?
@ToastyAnswers Жыл бұрын
You will need to do both. When you configure a VLAN for the Wireless network (on the AP) this will need to be passed all the way up to the gateway. For example, if you have two networks which will be passed all the way down to the wireless networks... (Say... Internal (1) (untagged) and Guest (2) (tagged).) Then, this will need to be passed end-to-end. In the controller, you will need two networks defined. One for VLAN 1 (untagged) and another for VLAN 2 (tagged). These will need to be tied to each respective wireless network. On the Edgeswitch, you will need to make sure the port connecting to the AP is not tagging traffic for VLAN 1, but is tagging traffic for VLAN 2. (PVID = 1, VID = 2). You will also need to make sure the uplink to the security gateway is untagged on VLAN 1 and Tagged on VLAN 2. Lastly, on the Security Gateway itself, you will need to make sure the uplink port has the network for VLAN 1 assigned as untagged and VLAN 2 assigned to the same port as "tagged". This is the "default gateway" for the network. Hopefully this made sense...
@hennessy6996 Жыл бұрын
Hi, awesome video! I'm new to UniFi. Question for you if you allow me please. Can these APs be managed from a different network that the APs are on ? For example, I bring these APs up in a specific VLAN for management, however, I want to have the management software installed on a VM on my server VLAN which is a different network secured via a firewall, is that possible to still manage these devices?
@ToastyAnswers Жыл бұрын
Yes, this is very possible and recommended. When you define your "Networks" just create an additional one for Management. Then, you can assign that network as the "Management Network" under each AP (I believe there is also a global setting for this, but I'm not sure off the top of my head).
@hennessy6996 Жыл бұрын
@@ToastyAnswers Hi Toasty, Thanks for this directions. I applied the steps you mentioned, when the APs report to the network application I can see the Mgmt VLAN subnet for each AP (tagging VLAN ID on the switch port). However, problems arise when I switch the management system to another network and VLAN ID, the APs start showing as offline, even though pings are possible to the APs. Am I missing something?
@user-ij4uh9br5r9 ай бұрын
Super helpful, thank you!
@boiga19668 ай бұрын
Thanks!
@cesarblanco Жыл бұрын
Great video thank you.
@netrionio1 Жыл бұрын
I want to say that I really admire what you do and I appreciate your work. But besides of that , I want to comment that the prices of unifi have skyrocketed. That means that if an AP has 200eur, it is better to look for other solutions. My first choice would be Mikrotik and then TP link Omada...
@ToastyAnswers Жыл бұрын
You are correct. The supply chain issues have caused prices to skyrocket. I've noticed this especially in the Edgerouter line of devices. The main draw has been the price to performance ratio, but that has dwindled recently. I've actually been doing a fair amount of testing on the Omada devices as a possible replacement for Unifi. There are a lot of pros/cons to this, but we can really only work with what we can get our hands on.
@PontschPauPau3451 Жыл бұрын
Just wanted to point out that the U6 Lite AP does NOT come with a PoE Adapter, you have to add it to your order. Very disappointed to open mine and discover I have to wait another week for a stupid adapter to come. EDIT: I see you've added it to the description since others have already pointed it out, but you couldn't spare a couple of minutes to edit the video too? Cmon man.
@himahamoda43058 ай бұрын
Good Job on your Video and I am hopping that you can show us how to set two Unifi Ap with the same SSID please?
@ToastyAnswers8 ай бұрын
This should be a part of a future video, but really all you need to do is adopt multiple access-points following the same procedure. By default, all APs you adopt will receive the same SSIDs you have configured in the controller so adding multiple for the same SSID is as simple as adopting more than one. You can limit the assignment of SSIDs through AP groups and certain models have a maximum SSID count per device. Hope this helps.
@itchyJaw7 ай бұрын
@@ToastyAnswers Hello how can I setup my ap that others can access it? Like for example I configure the nano hd unifi ap on my laptop but if I have another laptop I want to access it with that too how can I do it?
@itchyJaw7 ай бұрын
Hello how can I setup my ap so others can access it? Like for example I configure the nano hd unifi ap on my laptop but if I have another laptop I want to access it with that too how can I do it?
@benbalk892510 ай бұрын
Toasty, do you have a video on how to set up and manage door accesses? I am a landlord and need to set up different tenants with permissions.
@ToastyAnswers9 ай бұрын
Unfortunately, I have not messed with any of Ubiquiti's access control equipment.
@tttradionet Жыл бұрын
Why does my U6 pro not light up at all when i have the exact same setup? brand new everything.
@mGodrim Жыл бұрын
Hi Toasty, thanks for the video it's really great. I just have one question if i have 2 AP and want to make one wireless network, can I just use an unmanaged poe+ switch. Or do I have to get a managed UniFi switch like the USW-Lite-8-POE
@techtraveller3989 Жыл бұрын
Configuring Unifi is sometimes a problem when you set it up without using any switch and connecting it directly to your pc.
@MarcsTechBlogg Жыл бұрын
Hey :) great video!!! Unfortunately… the AP ist not showing for me like you explained in 30:35 😢 do you know why? I managed to sign it with my iPhone first, than I restored it to default swttings and followed all your steps but it’s still not there… do I have to connect to the AP via wifi first? Because it is asking me for a wpa key if I do so but I don’t know where to find that key…it’s not in my uni controller on my iPhone anymore, the light on the ap is white again… I don’t know why it’s not working for me
@joemeagem1 Жыл бұрын
I really appreciate your tutorial!!! I have what I hope is a simple question. I have used your simple computer based controller (no log into UBNT) process to program up APs for one business. Now I want to do that same for another business. I have taken a back up of the new set up and now I want to do a "file new" for another totally separate config. Do I need to remove the controller form my computer and reinstall or is there a simple new config option someplace or somehow? THANK YOU!!!
@lauraschuler4107 Жыл бұрын
Hi Toasty, Wow this is super educational and probably a bit over my head BUT my installer has gone missing 3 years after the initial config and i'd rather own the management anyway. the PW changed on my Arris Modem Router and the AP's went to PW error so non working in a stand alone bldg and in the main home. - they were never labeled as AP1, or 2 etc. I was thinking of following your video to reset my 2 UAP AC LR AP's back to factory then set up first as standalone via mobile app, then in the console (which I would download to a desktop) make it into one ssid and PW as you said in your past comments. All this plugged into an existing and broadcasting Arris modem/router that already has a SSID/PW - would these all just share the same SSID/PW for a room to room AP transition or does the two AP's just need to share a new SSID/PW that is already connected to the main router switch? thanks for any tips - can't get too much worse with it coverage being out. Thanks for this education... I will watch this a few more times but appreciate the time it took you to tell us this .
@electronic3479 Жыл бұрын
good
@jazzjohn24 ай бұрын
Quick question: Can a guest network be set up using the mobile app?
@brianracer686811 ай бұрын
Nice mousepad. 😊
@user-nv3fw2ej5r5 ай бұрын
Great video. Very informative. I have one quick question - if someone were to set up the AP's with the controller on a PC and down the road decided to buy a Dream Machine Pro can the AP's be moved over to the Dream Machine as the controller?
@ToastyAnswers5 ай бұрын
Yes, you can migrate between software and hardware controllers. There are some limitations, but in general this is supported.
@user-nv3fw2ej5r5 ай бұрын
@@ToastyAnswers that is good news. I am currently a Meraki customer from a home user perspective and I no longer want to pay to licensing fees. I just purchased one long range AP to test out in comparison to my MR34's so I will be setting it up as a stand alone. If the performance is better I will buy a few more. Eventually I can see switching out my MX64 and Cisco 3850 if all goes well.
@Eric-ou6iu Жыл бұрын
I got my WAP working finally but I cant figure out the desktop program. Wondering if you might be open to doing a zoom call to see if you could help figure out what is going on? I could share my screen. Thanks Eric
@AhmedSalahHassenTec Жыл бұрын
Thanks a lot for the explanation, Toasty, but it shows the last message in setup The device is being finalized and the setup depends on that I can't send a picture I am trying to make a config through the application on the mobile phone
@lepique2009 Жыл бұрын
Toasty, I am facing a problem where I can´t find the APs even following your guidance ... and after many attempts I got one of them in a separate network but can´t have it in the main network ....
@ZenoxioGD7 ай бұрын
Hi, I somehow created an account without watching your video. Now I cannot get the configuration page and it takes me straight to the UniFi Network page where I see the Self Hosted Network. How can I undo and start over so that I can follow your video and get the "Name Your Network application" page ?
@ZERICKLUMAMAАй бұрын
Thanks for the Video. How far can this send signal? I want to use my account at work place and the shop which is about 1 kilometre apart but I can see the building where the shop is situated when I'm at home.
@ToastyAnswersАй бұрын
These really only operate in roughly a 300ft diameter, but it could be more or less depending on the specific environment. Wireless operation has a ton of variables. If you are trying to cover a distance of 1km, I would look at the wireless bridge options such as the Nanostations or Ubiquiti's other bridge options. These are better suited to covering large distances.
@juicer526 ай бұрын
In process of setting this up and have some beginner's questions. There are 3 APs and will use PC as "controller." All 3 APs are wired. Can I use the same name for the network and password as the network name and pw of the main modem/router combo supplied by the ISP? Do the Unifi APs automatically mesh with the ISP's router and allow for seamless roaming while moving from one area of the house to another where the client device grabs the strongest signal automatically? The 3 APs and the ISP modem/router are in different parts of the house and I am hoping to be able to take advantage of the reach of each of the 4 broadcasting signal. Apologies for any dumb questions as my understanding of networking is limited.
@ToastyAnswers6 ай бұрын
You can set the SSID and password to the same as your existing modem/router combo. In theory, the devices should latch onto the closest access-point but this isn't very reliable in practice. The modem/router combo will not "mesh" with the Unifi wireless network. Devices will be able to hop between both (since the SSID/PW are the same) but the two networks have no way of sharing client information for roaming purposes (since they're two different manufactures, platforms, etc...). The "roaming" will be entirely up to the client devices which will most likely result in them sticking to one or the other as long as they're in range. I've had good luck with setups like this in the past, but I've also had terrible luck. It all depends on your individual setup and a million other factors... but on paper it is supposed to "work".
@outsidenomad Жыл бұрын
I am interested in being able to remotely access the controller and settings. If I go with the remote access option will that only work when controller software on computer is open and active?
@ajmexico Жыл бұрын
It seems like once you have set up the AP using the console software, the phone App is completely useless. Right? I just went through setting up an AP lite for the first time, and this video helped a lot, mostly to give me confidence that this would all work the way I wanted.
@ToastyAnswers Жыл бұрын
It isn't completely useless. You can still connect to the controller itself to monitor and make minor changes. That being said... I personally never use the mobile app.
@juicer526 ай бұрын
Hi Toasty. Me again. It's been two weeks of plugging away and I thought I had it sorted out BUT if I interrupt either internet OR power, the APs go offline and report "adoption failed". Controlled via Win 10 PC 2 older UAPs (M/N UAP) powered by POE wall adapters. After power or internet interruption APs get stuck at "adoption failed" Tried with DHCP and also with both static IPs set outside the DHCP range of the ISP router Tried Uplink Connectivity Monitor and SSH authentication disabled or enabled. Only a factory reset gets them up and running again These MIGHT have been working properly before ISP switched router, bypassing the Edge Max POE 5 router and owner isn't inclined to invest in new equipment since ISP provides one free wifi extender and aftermarket extenders aren't too expensive. When these first fell into my hands, a firmware was suggested and I accepted. (Bad idea?) There is one other UAP at the home that I assume hasn't been updated but I have no idea what controls it or how to see its Firmware version. If I unplug the ethernet cable, that one unit comes right back on line and since our area is prone to power and internet outages, I assume that one unit is coming back online unassisted. I realize these are outdated units so more of intellectual curiosity. Any suggestions much appreciated as Ubiquiti suggests just go buy new.
@royalbank29102 ай бұрын
Hi Toasty, thank you for this great video. I could configure my APs on my mobile phone following the steps you provided in this video. However, the console cannot find my APs. I reset the APs from the mobile and using the reset button on the device still cannot find the APs. Please assist. I am using Windows 11 Pro
@pbrigham Жыл бұрын
On the Unifi WiFi6 lineup, none of them come with a Poe injector with the exception of UniFi6 Mesh access point, all the other 4 types of Unifi WiFi6 line up DON't have a poe injector, you need to buy it separated.
@random007nadir Жыл бұрын
Good to know.
@ToastyAnswers Жыл бұрын
Thank you! That's what I get for not ordering a new AP to do this video with. I've added this to the description as a mistake/correction.
@pbrigham Жыл бұрын
@@ToastyAnswers Great, same happen to me, I got the Unifi WIFI6 Light only to found out that was not shipping with the Poe injector.
@LjupcoFTW4 ай бұрын
Question, I just had the chance to set one up, I didn't seprate the networks so It should be only one. But for some reason there are 2 networks one which is protected and other is not, if possible can someone tell me what is the problem?
@fatalradius Жыл бұрын
Toasty! Thanks so much for this video. Quick question for you (although I believe you kind of already answered it, but I just want to confirm with you). My friend has an office space with a Comcast Business Router, and he bought 4 UniFi 6 Lite's. Basically we plugged each one into the Comcast Business Router, and when setting up through the mobile app it asks us to set up as a stand alone device since we didn't have a console. It seems like we need to configure and name each access point with its own SSID and pwd. Ultimately we'd like the wireless network under one SSID and pwd, where each user auto switches to the nearest AP. This can only be done with a separate Ubiquiti console?
@ToastyAnswers Жыл бұрын
Yes, with the Unifi console (controller) you can push the same SSID and password to all APs at the same time. You can configure each one individually (as you've already done) but it definitely makes things easier with a controller orchestrating all the changes.
@mattpeulen45282 ай бұрын
Anyone have any ideas if I don't seem to be able to see my three ap's no matter what I seem to try?
@aamjad2001 Жыл бұрын
Hi, i wanted to have something which i could use to enable multiple students to connect to the wifi without problem inside a classroom. So i decided to buy a single unifi ac pro ap and connect it to my 100mbps ptcl router. I installed the software on my computer. And followed steps given on internet. Now all i get is wifi only when i and about as close as 1 foot to the ac pro. As soon and i move away. I loose all bars of wifi. So no connection. Does this mean that my device is broken. Or what. It works
@MG-jz1eh8 ай бұрын
Hi, I have a question. I have a WiFi modem, from that modem cable goes to the AP via its adapter. Referring to your WiFi setup screen @ 14.25 video, should that be the same as wifi name and password from my modem, or can I pick something completely different here?
@ToastyAnswers8 ай бұрын
You can pick something completely different if you would like. It's really a personal preference as well as a trade-off. If you choose the same SSID and Password as your modem, you shouldn't have to manually switch networks. Your devices should connect to either/or as long as they're in range. The downside is that while it should work like this in theory, you sometimes get devices hanging onto a single AP even when the signal is unusable or flat out refusing to connect to the other access-point. If you choose a completely different SSID and Password you will have to manually choose the wireless network you want to connect to. Of course, if both are saved on the device and you run entirely out of range of one... your devices should connect to the other (as long as you have the automatically connect option selected for both wireless networks).
@MarcelGavalier Жыл бұрын
My mikrotik POE router do not boot up the antena and i need to use POE injector!
@yask4it10 ай бұрын
The tool to open cover comes in the box
@DesignerDigital6 ай бұрын
So, Question! I have my unifi 24 POE+ 2.5 Switch, I have 4 AP AC Pro units, once I set up the two networks House and Guest on every AP and everything is all plugged in. How do I set up preference on which endpoint will connect to each AP, will it do it by proximity? or how does it normally work. I just don't want the TV all the way to the corner to be connected to the AP that is the fartest away.
@ToastyAnswers6 ай бұрын
In theory, it is by proximity. However, there are a ton of factors that will determine how well this works in practice (device type, supported protocols, network-specific configurations, etc... . If the two APs are too close to each other, you may have a difficult time getting clients to connect to the nearest AP and not "stick" to one that is further. Since the TV doesn't move it will probably stick to the nearest AP "better" than other devices, however, if the nearest AP reboots it could connect to the further AP and decide to remain there. There are things you can do to try and solve this issue, but it can get quite involved.
@DesignerDigital6 ай бұрын
Heard about Band sterring, I guess power cycling your APs every once in a while can help out as well. @@ToastyAnswers
@danielalexis9409 Жыл бұрын
Toasty, Thank you so much for this tutorial. What is the max distance between my router/modem and my AP please? I set up one up in our church which is over 400 feet. I do not get good wifi connectivity. What can I do to optimize that?
@ToastyAnswers Жыл бұрын
If you are using Cat5(e) ethernet cable to connect your AP to your router/modem then the maximum distance is going to be 330 ft (100m). This is a physical limitation of the medium and while it may "work" at distances greater than this, it is not recommended or reliable to do so.
@danielalexis9409 Жыл бұрын
@@ToastyAnswers Thank you for your reply. I am using Cat6. What can I do if I need to go beyond that 330 ft limitation please?
@d4nkbud Жыл бұрын
Toasty, thanks so much or the video. I am looking to install several unifi WAPs. How would I go about installing WAPs #2-4 (townhouse, one for each floor) while keeping each WAP on the same SSID? Thanks!
@ToastyAnswers Жыл бұрын
Basically, the exact same. Once the controller is up and running you can adopt the rest of the APs in the same manner as the first (as long as they can communicate with the controller). The wireless settings are pushed to all the APs unless you setup specific AP groups.
@wilmanmiami Жыл бұрын
Great video Sir. How I reset the AP from the network controller pc software, without press the reset button at AP, thanks
@ToastyAnswers Жыл бұрын
If you navigate to the device in the controller there is an option to "Forget" the device. This removes it from the controller and automatically resets the device to factory defaults. I believe it is under the device maintenance tab... it's changed places a couple of times throughout the years.
@kyngsley1 Жыл бұрын
Toasty you explain things very easy. Can you explain how to configure udm pro with a 24 port switch using sfp ports.
@ToastyAnswers Жыл бұрын
I can definitely do that once I get my hands on one. I haven't pulled the trigger on ordering a UDM yet.
@deprofj.i.b5558 Жыл бұрын
Thanks for the video. My question goes thus, why is my UDM Pro failing to adopt my devices (such as switches and APs)?
@ToastyAnswers Жыл бұрын
Typically, when I see this happen, it is because the devices are on a different network than the controller and do not have the "Inform-address" configured correctly. Also, if the devices are not getting IPs via DHCP, then they can "fall-back" to the default IP of 192.168.1.20. If all of them are connected at the same time and fall-back to this IP, there will be problems. I would first make sure the devices are getting the proper IP and that it is on the same subnet as the UDM Pro. Second, I would try adopting the devices one at a time. There can be some other reasons for adoption failure, but those are the most common.
@jarwinvandulken40056 ай бұрын
Question. If i have 1 ap in the gardenhouse and an normal router in my house. How will it switch between both wifi networks? Or can i give them the same ssid name. Thankx
@ToastyAnswers5 ай бұрын
If they have different SSIDs then you will have to manually switch between each wireless network. That is, unless you completely lose signal from one and automatically pick up the other. Typically, as long as you have a usable signal from one wireless network, you will stay connected and not switch to a different SSID. You set both networks to have the same SSID and password. This increases your chance of a device automatically connecting to the closer access point. This doesn't always work in practice, but worse case scenario is if your device completely loses connection with the house, it should automatically connect to the the gardenhouse if it is closer. There are some caveats to this... but in general this is how it is supposed to work.
@Stormwhopper Жыл бұрын
Hey Toasty Thank you for your to trials. I had to reset my network and wanted to implement my AP into it. For some reasons, the controller doesn't show the AP. Only in my mobile App as standalone is possible. Its reseted. Did it x times...do you have any idea?
@ToastyAnswers Жыл бұрын
Usually, this is because the controller and the AP are on different networks. There could be a lot of different reasons for this, but I would make sure the IP address the AP is receiving and the IP of the controller are on the same subnet (i.e. 192.168.1.X).
@castromcesar2489 Жыл бұрын
Thank for all your great help I have a question there's a way the Ring work any UBIQUITI SYSTEM cloud record playback anything thanks
@ToastyAnswers Жыл бұрын
I'm unsure exactly what you are asking, but the Ring cameras will not work with Unifi's Protect software.
@JagadishM Жыл бұрын
thanks for lovely content video,, in next part of this video make it Guest Hotspot, Bandwidth profile, how do i limit download speed for quest wifi clients so on..
@ToastyAnswers Жыл бұрын
Thanks for the suggestion! I've got a guest hotspot video on the to-do list.
@lankari14 ай бұрын
The app does not look anything like in this. Where do I get the password? I stopped wathing at 21 minutes because I do not understand anything, and nothing looks like in my devices. (Apart from the box and the device outlook.)
@djhinrg Жыл бұрын
I bought ap enterprise, am using poe lite switch. My controllers can not find the ap. Any advice?
@ToastyAnswers Жыл бұрын
Make sure the APs are on the same network as the controller and that there isn't any firewall or anti-virus breaking communication on the controller itself (the APs need to be able to talk with the controller on port 8080 at a minimum.
@Mark-hi7kh Жыл бұрын
When I was setting my access points up about four years ago I had always read to never set the radio power auto and the channel to auto. Has that functionality been improved over the last few years?
@ToastyAnswers Жыл бұрын
I feel like it's gotten a bit better. Recently, I've set more deployments to use only auto and I haven't had the nightmares I've had in the past. It definitely works better with smaller deployments though. I will still manually tune the radios if there are a good number of APs or if they're in a crowded area.
@drsch4 ай бұрын
Unfortunately the desktop software menus are very different now than they are in this video.
@bLegendaryful Жыл бұрын
Hey Toasty! I have a telus wifi hub as my main wifi point and want to use a unifi 6 lite for my basement. Would I set my wifi/password in step 5/6 of "initial controller configuration" as the same as my current wifi in order for it to mesh together?
@ToastyAnswers Жыл бұрын
You can set all the details the same in order to have a (mostly) seamless experience. In theory, your devices will "roam" between the two depending on signal strength. However, in practice, it doesn't always work seamlessly... your milage may vary, but that is how I would set it up.
@marksparky Жыл бұрын
Hey all hope someone can help. My nanoHD doesn’t show up in the controller app. I can set it up via the phone app but I’d rather use the controller for more functions.
@flowntn1989 Жыл бұрын
Excellent as always. In a SOHO environment, why would one use vlans rather than an additional WIFI network with “guest” enabled, which is what I have always done. There is the usual issues of enabling wireless printers for the guest network, dong that would be a very helpful tutorial. The U6 waps are a big step up from WiFi5 (in my experience with lites at least) and worth an update in its own right. More please!
@derek400004 Жыл бұрын
if your needs can be satisfied by enabling the separate guest network, then just do that. VLAN is intended for more advanced use cases, and e.g. especially if you have multiple (4 or more) subnets that you want to keep separate from each other, and want to service all of them without a whole lot of SSIDs, which will impact your wireless network performance.
@user-gu2sm4hi4w Жыл бұрын
Hi. My two Unify 6 Pros in 2 rooms are not dropping any phone while running around between them so the download / upload drops from 300 mbs to 1 mbs and below. How to set this up correctly please that a client with bad connection would be forced to connect to the better access point please?
@ToastyAnswers Жыл бұрын
Check out my optimization video for more information, but you can try to tune the channels and power levels to best suite your environment. However, there are quite a few variables that can come into play here and tuning can sometimes be more of an art than a science.
@andresinaga9885 Жыл бұрын
Hey Toasty! How many clients can Unifi AP AC HD provide with each of them doing a video conference (Google Meet, Zoom) in your opinion?
@ToastyAnswers Жыл бұрын
The main difference in the HD version is the 4x4 MIMO radio as opposed to the 3x3 in the AC Pro. The actual amount of clients will depend largely on the actual environment the wireless is deployed to. There are a lot of variables and a lot of optimization settings that can affect the actual number of clients supported. From a quick google search, it seems like 200 clients isn't unheard of. However, this isn't assuming they are all in a zoom meeting simultaneously. By the numbers, at 1.7Gbps, the HD should support roughly 550 clients on a zoom call using 1080p resolution (at 3Mbps per stream). This is theoretical, and like I said above, will depend largely on a variety of factors. I don't believe the HD will support near this many simultaneous users.
@frickious2864 Жыл бұрын
signing up using UI account will allow me to remote access to an AP from anywhere?
@ToastyAnswers Жыл бұрын
Yes, as long as the local controller has internet access.
@kentech8783 ай бұрын
My unifi 6 pro Never works have tried to configure it with no success I only see a wifi names with mac address but i cant see any password to access it
@cheslynboks78886 ай бұрын
hi can you control the ap remotely with your phone as well like if you need to whitelist a mac address or can this only be done on the unify controller
@ToastyAnswers5 ай бұрын
You can make limited configuration changes using the mobile app. I'm not entirely sure if MAC whitelisting is included in the mobile app, but as long as you are able to access a controller instance you can make some configuration changes.
@cheslynboks78885 ай бұрын
@@ToastyAnswers thank you
@tonyarnachellum3364 Жыл бұрын
Hi can someone please tell me how to add my isp settings to the network controller? thank you.
@spitsparrow Жыл бұрын
I plugged a new one into ethernet cable that is coming out of a switch. Its POE so should be getting power. But literally nothing happens. Is there a button that i need to press or once plugged into something the light should just appear?
@ToastyAnswers Жыл бұрын
There isn't a button you need to press. The AP should start lighting up when it is plugged in as long as the PoE version is supported. This depends on the version of PoE supported by the AP as well as the version supported by the switch.
@avurasamuel7193 Жыл бұрын
HOW CAN I LEAVE MY NETWORK OPEN
@missj7765 Жыл бұрын
Do you offer outside on KZbin help because I need help. For some reason when I try to set the access point up via controller it won’t give it that way and it doesn’t work standalone either
@ToastyAnswers Жыл бұрын
Please send a message to toastyanswers@gmail.com for additional support.
@missj7765 Жыл бұрын
@@ToastyAnswers thank you, I will be sending you an email in the morning
@speed4502 Жыл бұрын
Can you do multiple APs on the mobile app? will they all be independent? is it better to just do it on a controller
@ToastyAnswers Жыл бұрын
You can setup multiple APs on the mobile app, but they will be independent. The best way to deploy these is with the full controller.
@speed4502 Жыл бұрын
@@ToastyAnswers the reason why I ask is because I have setup a client on my laptop. And I still have their controller on my laptop. So to install a new controller I’m gonna have to until the old one and install a fresh one correct?
@parvez7077 Жыл бұрын
How far can the poe injector be from the access point?
@mohamedelaater1210 Жыл бұрын
120m with cat 7A S/FTP Cable
@faradayengineeringlimited Жыл бұрын
I added an unifi AP to a 3rd party router, do I choose NO DHCP or DHCP Relay ?
@ToastyAnswers Жыл бұрын
When using these with a third-party router, those settings don't do anything. It really doesn't matter what you select because they won't be applied if you don't have a Unifi gateway device. Keep in mind that whatever settings you select will be applied to a Unifi gateway device should you ever install one.
@lil_rockstarrr Жыл бұрын
If I want wifi can I add my aircube to devices when designing the network? It wants me to purchase devices when I just want the wifi
@ToastyAnswers Жыл бұрын
You can add the Aircube into the mix at any point. I'm not really sure what youl mean by purchasing devices. I don't have any experience with the AirCubes.
@varnarao8432 Жыл бұрын
Why connect on mobile app if it wasn't required in the first place?
@ToastyAnswers Жыл бұрын
Can sometimes be quicker to setup if you don't have an existing environment.
@robertclanin3148 Жыл бұрын
Thanks for the help, I can't get the file to open. It's asking what program to open with. can you help me. I downloaded Java
@ToastyAnswers Жыл бұрын
You should select the latest version of Java you downloaded to open the program. The latest versions of Unifi controller use a different version of Java than all the previous editions. This usually causes some issue with launching since most people have the previous edition installed and then have to upgrade to the new Java 11 to run newer controllers. My recommendation is to un-install the older version of Java if you don't have any other programs dependent on it. Otherwise, you will need to manually select the newer Java runtime.
@robertclanin3148 Жыл бұрын
@@ToastyAnswers Thanks, Java is such a bother
@parvez7077 Жыл бұрын
Can we use any other brand poe switch ? Can you suggest 1 poe switch that is compatible to this ubiquity wifi 6 access point
@ToastyAnswers Жыл бұрын
Any switch which supports the same PoE spec as the access point will work. My two examples are Cisco SG-350 and TP-Link JetStream 8-Port. PoE is a universal standard and as long as the switch supports that standard then it will work.
@dannyzhang4854 Жыл бұрын
When I try to scan the AP bar code, but it keep ask to join the unknown wifi network, so I cannot adopt the AP, any solution for this?
@ToastyAnswers Жыл бұрын
I haven't encountered this problem. You may try resetting the AP to factory defaults and trying the process again.
@prodigy803 Жыл бұрын
How do I integrate it into my Deco mesh setup? Can I just plug it into my Deco unit instead of my router?
@ToastyAnswers Жыл бұрын
I don't have any experience with the Deco mesh system. If it allows wired connections, you should be able to plug it in (most likely using an injector) and have it work normally. However, it will not tie in to the mesh system and will operate independently of that system.
@user-pv7xd8ir6u Жыл бұрын
Please can i use different controller after resetting the AP?
@ToastyAnswers Жыл бұрын
Yes, when the AP is reset, it will be eligible for adoption by any controller it can contact.
@PopoyTanke Жыл бұрын
What PoE supported switch are you using?
@ToastyAnswers Жыл бұрын
The one I used in this video is a TP-Link TL-SG2210MP. My main switch (for all my "production" equipment) is a Cisco SG-300.