Universal Pellet Stove Distribution Convection Motor Blower Replacement How To

Instructional video for the universal replacement Blower Motor Fan PH-1500CWFM. 1500 RPM Convection Distribution Blower Motor replacement used for Harman Fasco motors, St. Croix and Kozi Brand Pellet Stoves.

[@jimeide2542]

I received my replacement from you and this video will help save me some time. The wiring question and your answer also helped. Thank you

[@EarthSense]

Very glad to hear that Jim - Let us know how everything is operating once you have it installed. We'll make sure you are 100%. Thanks!

[@rcdogmanduh4440]

Excellent now if finding some that sells just motor was that easy!

[@EarthSense]

Here's a direct link to the motor kit pellethead.com/product/kozi-pellet-stove-circulation-fan-kit-120v/ You can browse all of our parts at www.pellethead.com. We guarantee the best prices with the fastest shipping!

[@VeeLo1]

Hi. I'm wondering the if I ordered the right one. My cage only has 2 holes and the clip in wires are a bit different. I drilled 2 new holes and you send the other wires. Should I change out the wire clip? I have two female white wires.

[@EarthSense]

Thanks for contacting us. Just to verify, what stove make and model are you putting the blower into? Also, do you have a part number on the blower you ordered? Happy to cross check with our parts team and make sure we give you the right direction. Thanks!

[@VeeLo1]

@@EarthSense I have a pelpro flat top and I ordered the 238943Pellethead Replacement Glowb...SKU: KS-5020-1050 | ACCVFNAS | PH-1500CWFM-KIT

[@EarthSense]

@@VeeLo1 Thanks for the information. I believe you can just change out the wire clip/end here and be good to go, however I am running it past our parts manager for confirmation. I'll be back in touch ASAP. Thanks!

[@EarthSense]

@@VeeLo1 I have heard back from our parts manager: If installing into a Dayton blower housing this is normal. The PH-1500CWFM was intended for the Fasco housing but with slight modifications will work in a Dayton housing as well. I believe in both applications the “noise reduction ring” is not used. Metal on metal due to short pemb studs. Let us know if you have any other questions. Appreciated.

[@charleschapman2428]

I just received this blower, what size is the allen wrench, I can't seem to find anything to fit it.

[@EarthSense]

Charles, Our service tech just stated he uses a 7/64" T-Handle Allen Wrench. A Metric 119mm / 19mm Allen Wrench should also work. Any other questions please let us know. Thanks.

[@budtate401]

Will that work with an englander blower housing also

[@EarthSense]

Hey Bud, depends on the Englander model you have, but yes for most you can just replace the motor and utilize the existing housing. If you know which model Englander you have let us know and we can steer you in the right direction. Thanks!

[@renaesandoval4842]

Hi what wire plugs into the new motor I have 2 wires white and other pink the new motor has 3 wires white, black and yellow with green are u able to tell me.

[@EarthSense]

Hi Renae, happy to help. If you do not have the green (ground) wire lead you can leave that disconnected. I would suggest you connect the white to white wire and black to your pink wire. Keep us posted. Thanks!

[@hanlonsrazor6474]

@@EarthSense Thanks for the response! I was running into this issue as well.

[@renaesandoval6933]

I have same model #but my original cage bigger and why 3 wires with the new one the original has 2 wires

[@EarthSense]

Thanks for the message Duane. Yeah, depending on the blower make and model there will be some variances to the size and type of the inner squirrel cage paddle wheel. With the wiring, most new blowers will have the 3rd green ground wire. The ground can be left disconnected if you don't have a receiving wire in your model. Any other questions please let us know. Thanks

[@ernestoflores6856]

How can I know if convection motor is damaged, mine is not running?

[@EarthSense]

Ernesto, Let's run the motor to direct power to ensure the motor itself is running properly. Here is a video on creating a test cord so you can do this. kzbin.info/www/bejne/qJ3QmnaPfpeKhs0

[@WilliamVG]

1500cfm? I don't think so.

[@EarthSense]

No, 1500 RPM, not CFM. Any other questions please let us know.