Unleashing the Wecreat Vision 40w Diode Laser

The WeCreat Vision 40w is the laser I've waited 4 years for and is the first laser I've owned that is comparable and better than most 40w CO2 Lasers
WeCreat's MakeIt custom software makes the experience of creating as easy as possible. This is a great machine that could easily become the centerpiece of your creative workflow and the software now has an integrated AI function that makes designing and creating even easier.
*************************************************************
-------- Get One for Yourself: shrsl.com/4kin2 --------
************************************************************
**Ask questions, I would be happy to talk about and answer any questions you have about this laser
---------------------------------------------------------------------------------------------
***Please consider subscribing and supporting the channel on / geekbuilders
Custom designed shirts available from TeeSpring:
geekbuilders-s......
More info - Go to:www.geekbuilder...
----------------------------------------------------------------------------------------------
-Follow and Subscribe
/ geekbuilders
/ geekbuilders
/ geekbuilders
***Check out the Making Geeks Podcast
**www.makinggeeks...
-------------------------------------------------------------------------------------------
Music was purchased from:
EpidemicSound.com

[@tiffanyhallback4055]

Hi! Thank You for this review! I am interested in cutting acrylic clear, metallic and colorful words and single letters across a variety of fonts. Will it cut acrylic?

[@GeekBuildersNet]

Diode lasers and only cut and engrave dark/opaque acrylic. You cannot cut metal with any diode machine

[@RodneyJorgensen]

12:37 I’m looking at purchasing this machine. I’d like to add the additional exhaust fan. I can’t seem to find where you linked to it. Thank you and great information on the machine.

[@GeekBuildersNet]

@@RodneyJorgensen Here is the link for the in line fan. You might also need to be an adapter to fit the hose to the fan. a.co/d/28h8N2U

[@mtz3843]

ive almost got the money saved up to get one, i really want a wecreat 40w, so i can do some deep engravings pics for my church. ty

[@GeekBuildersNet]

That's great! That sounds like a great use for the machine.

[@billedburg7712]

Review sounds like every other one, like you didn't really look for or mention the negatives because machine was free..

[@GeekBuildersNet]

Ok, fair. Here are some negatives. 1. Using the machine feels like working in a bucket, it is not entirely comfortable to work within. 2. The built in rotary is a great convenience but does not allow for a lot of flexibility especially if the item has a severe taper. 3. The fume extraction could and should be a little better, an in line fan is a near necessity. 4. The machine is fairly tall in resting mode so should be place on a waist height or below surface to make it easier to work with. 5. The software will decent still has a lot of improvements that can be made. ---Anything else that might be deemed negative from my experience stems from diode technology, not WeCreat. I hope that helps a little.

[@tedcisneros5382]

I didn't see the information on the exhaust fan?

[@GeekBuildersNet]

@@tedcisneros5382 Here is the link for the exhaust fan I currently use. a.co/d/2QgbZ2t

[@nikkiahodge-drain4321]

Can this engrave shot glasses?

[@GeekBuildersNet]

It can technically engrave glass, but requires an extra processing to do so

[@onewtonphoto]

Can it cut a 2x4 bar of plywood?

[@GeekBuildersNet]

It probably can, but it is the most ineffective way of cutting a 2 x 4