If you want to see high res images of these holders to aid in making your own, you can find them on my website: www.thewoodwhisperer.com/videos/unnecessarily-fancy-custom-walnut-tool-holders-for-chisels-spokeshaves-router-plane-and-scrapers/
@zachariahbuckmaster66114 жыл бұрын
I'd laugh if I clicked the link and it was a high res photo of your open fly.
@woodenren4 жыл бұрын
Beauty table.
@daltonwilliamson81604 жыл бұрын
Great video. Could you explain that table saw technique you use at 1:45
@bloodgracet56404 жыл бұрын
I do appreciate Mark' s sense of humor, a really top-level woodworker and yet doesn't take himself to seriously. I have gained a great amount of training from watching Mark. Love the videos.
@woodwhisperer4 жыл бұрын
Really appreciate that!
@jeffgrant9354 жыл бұрын
All I could hear was Cremona saying, "Nice Crotch!"
@RedBairnMedia4 жыл бұрын
And here was me thinking Matt Cremona was the only one that heavily featured Crotch figure in his videos.
@anthonydtobias4 жыл бұрын
Ha! Good one
@manny35493 жыл бұрын
@@anthonydtobias lol!!
@nathancragun56404 жыл бұрын
I have never felt closer to you.
@peejavery4 жыл бұрын
I maintained eye contact the whole time.
@janitor66694 жыл бұрын
Liar, liar, unzipped pants on fire.
@JoshStockwell844 жыл бұрын
Which eye
@davidgreen37234 жыл бұрын
Mark has to be the only woodworker on KZbin that doesn’t use French cleats for everything!
@woodwhisperer4 жыл бұрын
David Green and ironically, I probably started that trend or at least encouraged it. 😂
@maxthrust9764 жыл бұрын
I did the same magnet thing on a box I made for my palm gouges, only I covered the magnets (and the entire inside bottom of the box) with some nice 0.3mm birch plywood. Clearly we’re both brilliant.
@TheEveryMaker4 жыл бұрын
Thank you for not refilming the intro. I needed the laugh today.
@WindRidgeWoodCrafts4 жыл бұрын
Exactly. I bet that was the toughest 3 seconds of Marc's life deciding whether to reshoot or not.
@filimoncatalin4 жыл бұрын
I watch it every time I need a good laugh and can`t help thinking of J when he made that zoom-in...how amused he was :)))))
@firesurfer4 жыл бұрын
For the small chisel, use the Forstner bit to drill for the magnet, insert magnet, cut a plug to fill the hole, recut the slot. Glue in cork. OCD is satisfied. I bet now you can't stop thinking about it. payback for 0:11
@zacprunty4 жыл бұрын
lmfao. that slow zoom got everyone in here feeling like uncle touchies.
@southerncustomcuts7294 жыл бұрын
I thought the “staring” comment was about the paid promotion graphic! Once it was fully zoomed in that I realized what was going on! #reallife
@adamb26194 жыл бұрын
While I love the large in-depth projects you present, I love these smaller projects...they keep the woodworking moving in his shop. I promise I didn't stare too long.
@characterbuilding8866 Жыл бұрын
I LIKE HOW THIS VIDEO WAS POSTED 2 YEARS AGO, BUT I CAME ACROSS IT AND LAUGHED OUT LOUD AT THE BEGINNING WHERE I COULD NOT STOP CHECKING OUT YOUR OPEN POUCH. its still funny!
@MaydaysCustomWoodworks4 жыл бұрын
Dude props for just rocking the fact that it's overkill lol. I mean... In a content Creator's shop, almost everything is overkill from what's absolutely necessary for function... Because it's necessary for appeal which strangely enough is profitable.... anyways! ... Great video. And I really appreciate the transparency about overkill. I think more starting woodworking need to know the possible simplicity they can go with to get great functional results
@woodwhisperer4 жыл бұрын
Thanks man. Though I wouldn't say my overkill shop is that way for the sake of appeal. I'd say it turns off as many people as it attracts. I do it because that's what I want to do. When I stopped building furniture for clients, I went back to more of a hobbyist mentality and my shop pretty much reflects that. But it's more about my personal desires than appeal. If I were going for mass appeal, I'd probably downgrade everything in my shop.
@MaydaysCustomWoodworks4 жыл бұрын
@@woodwhisperer oh. Well that makes sense to me. And that's totally fair. Well again, props for just rocking it lol. I know most people would do the same if it were viable for their situations. I'm personally very "function" motivated but that's because my business is making wood products. If I were retired or I did this as a hobby I would likely take the appeal up several notches as well
@uriel-heavensguardian8949 Жыл бұрын
😂🤣😅🤣😂🤣 I caught that sir! It Happens! I do it all the time. Great video!!!
@damc32324 жыл бұрын
This is the reason we like TWW so much. Informative and funny AF.
@andrizeefoshizee3 жыл бұрын
This OCD attention to detail makes me so happy.
@roofermarc14 ай бұрын
Really nice. What an inspiration
@seanbrotherton5424 жыл бұрын
That is the funniest thing. Anyone else would have reshot the entire video. Glad to see the humor and real life remaining in the content. Going to build that for my chisels. Will go unzipped to make it authentic!
@scotadam4 жыл бұрын
That slow pan in at the beginning got me. Thanks, I needed a laugh.
@jcims4 жыл бұрын
Saw the sign, scrolled down to lol at the comments, scrolled back up to see the barn door front and center. Got a good belly laugh. cheers!
@realpdm4 жыл бұрын
omg the slow zoom. Thank you for this.
@contra813 жыл бұрын
I know its been a year but i spit out my coffee laughing and said YOUR BARN DOORS OPEN out loud lol
@matthewwilt14554 жыл бұрын
Mark, I love your sense of humor!!
@alevxzx4 жыл бұрын
Simply gorgeous! The tool holders I mean. I'm sorry, but the rack for card scrapers is not screwed perfectly vertical on the wall.
@matthewgrisnich17694 жыл бұрын
Ya its an eighth of a degree out. Terrible!
@daniel923e4 жыл бұрын
I like the quality of content in your videos, and also the humoristique part.
@Ericd4894 жыл бұрын
I can't wait for part 2, "Decorative Inlay on my Walnut Tool Holders"
@reforzar4 жыл бұрын
The intro was perfect.
@Wordsnwood4 жыл бұрын
What is seen cannot be unseen.
@doubledarefan4 жыл бұрын
If you wood not have pointed it out, I probably wood have not noticed. On topic: Mark of Gunflint Designs wood be proud. #unnecessarywalnut
@donbrowning6894 жыл бұрын
Very nice!
@TheAllmightyHansa4 жыл бұрын
Hey Mark. Just wanted to say that I love your videos. You have such a relaxed style. ^^ And as a non-native speaker I like your clear speech. It is quite easy to follow you. 😃
@anthonyboudreaux36754 жыл бұрын
I just finished my workbench and trying to decide whether I should build drawers. Do you have any regrets about adding it to yours. I really enjoy your humor and your skills. Thanks for posting
@woodwhisperer4 жыл бұрын
Anthony Boudreaux not at all. It’s a nice way to store the stuff you use at the bench among other things.
@michaelfarmer26612 жыл бұрын
OCD is a gift Details matters great job
@toddtidwell4 жыл бұрын
Tears are pouring because I'm laughing so hard. Best intro ever. I laughed at the blatant pointing it out...and then died as the slow zoom started. If this woodworking gig of yours doesn't take off, you've got a career in comedy videos.
@5minutewoodworker1434 жыл бұрын
Fantastic video once again!
@gbjones544 жыл бұрын
Ok I won’t look and you don’t think of Elephants. 😂 😂 😂. Fancy stuff Marc but good ideas.
@thewoodweldingfabricator93004 жыл бұрын
Ok we get it! Your both talented with wood and with 'wood', you dont have to rub our faces in it.
@davidlashaway2 жыл бұрын
In the process picking up a Veritas router plane. What is the most common size blade you find yourself using? Or should I just pick up the set that comes with all the blades?
@Daweisstebescheid4 жыл бұрын
it is not unnecessary, if it satisfies you then it is justified 🤘😎🤙
@woodwhisperer4 жыл бұрын
I like the way you think!
@ragnkja4 жыл бұрын
Daweisstebescheid We should allow ourselves pretty things in our workspaces, because we do better quality work when we’re happy.
@Daweisstebescheid4 жыл бұрын
@@ragnkja yes, absolutly 👍👌
@brucegoodwyn9784 жыл бұрын
All this may seem like small "piddly" items but they give the shop just a little bit of flair. Of course, using walnut doesn't hurt!
@kennethturner95814 жыл бұрын
Wow I really love the look of that oak. You sir are a true craftsman!
@SpencleyDesignCo4 жыл бұрын
Kickass video Marc!
@manny35493 жыл бұрын
Love this build! Camera went closing up on its own from 0:19 to 0:48 for some reason
@woodwhisperer3 жыл бұрын
Oh that wasn't "on its own..." lol
@manny35493 жыл бұрын
@@woodwhisperer "Try not to stare at this!" LOL! - Allow me to tell you that you do such a great job educating us and helping us...we appreciate it every bit!
@woodwhisperer3 жыл бұрын
Thanks very much!
@lifeofbrian96954 жыл бұрын
Great, now I can't help but stare since you pointed it out.
@crmcbrideww4 жыл бұрын
Hey your Duluth fireflex hose was shown.
@matthewkowalski87774 жыл бұрын
When the zoom in first started, I thought to myself "wow, Marc is really starting to take his editing to the next level!" Then after 10 seconds, it became clear what was happening. ha!
@wb_finewoodworking4 жыл бұрын
Loved the intro! I also liked the tool holders. The walnut was a great choice.
@dominiquebrewer1392 ай бұрын
What chisels are these? They are beautiful!
@BeaverCraftTools4 жыл бұрын
Thank you for sharing this interesting video. Love your sense of humor 😁
@odarkthirtywoodworks35434 жыл бұрын
That slow pan had me in stitches! Thanks brother for making me laugh! Great work as well!
@JonDunnmusician4 жыл бұрын
All fantastic- magnets style points
@SSBailey778454 жыл бұрын
Okay.....I’m not staring but, dang, I cannot tell you how many times my own fly has been at half mast!🤣
@rmyukon4 жыл бұрын
The zoom in made me crack up. :) :)
@Archania4 жыл бұрын
Can't stop staring now....
@aaronallgrunn78454 жыл бұрын
Finally found the one way to slow zoom in forcing thousands to look, and not get "me too'd". True craftsman.
@willygonwildincanada90244 жыл бұрын
So unnecessary yet so satisfying!
@craigpereira63814 жыл бұрын
Very Nice
@islanddreamers91274 жыл бұрын
The Wood Whisperer!! Now with more crotch !
@jeremyspecce4 жыл бұрын
Just got one of those router planes and still have everything in the box it came in. This is pretty do-able!
@anthonydtobias4 жыл бұрын
🤣 Damn it camera, back up!! Back it up!!!
@danielwinsor60184 жыл бұрын
🤣🤣🤣 My man! Been belly laughing for like half an hour!
@BaoNguyen-un1km4 жыл бұрын
Lol unnecessarily fancy indeed
@alfredneumann46924 жыл бұрын
I see, you also don't like the french cleat system. Good!
@johnpembleton19194 жыл бұрын
Nice job, can you post link for magnets. Thanks
@drparks10613 жыл бұрын
Why not use french cleat system? I just got done watching your other video on it and I'm interested in doing one for myself. But have you abandoned it for some reason?
@vallejokid19684 жыл бұрын
Your tool holder is open
@jonathanmoore4674 жыл бұрын
Hahaha 😂!! Way to out-crotch Cremona!
@mdoering4 жыл бұрын
That intro had me dieing Marc 😂
@whiteheadcustomcrafts35554 жыл бұрын
im looking to get myself a really good set of chisels can you recommend anyone
@Pierre-Axel4 жыл бұрын
😂😂😂😂😂👍👍 thank s Mark your great😘🍺🇨🇭
@blayne2029 Жыл бұрын
what kind of router bit was used? thank you!
@natelarge4 жыл бұрын
Your killing me with the slow zoom 😂
@forestlampcraft4724 жыл бұрын
👍👍👍👍👍👍👍👍👍👍
@scottroy61954 жыл бұрын
I wouldn't have noticed if you didn't point! Now it's all I see.
@FAMAWoodworking4 жыл бұрын
Great job, thanks for sharing!
@FredMcIntyre4 жыл бұрын
Nicely done Marc! 😁👌🏻👍🏻👊🏻
@motormikeyy77074 жыл бұрын
i cant even look at your eyes in this video!! LOL WHYD YOU POINT IT OUT... hahaha
@chrisd36484 жыл бұрын
What’s the countersink bit he uses at 3:50? I have seen it before and mentioned but I can’t find where.
@CanadianFuzzy4 жыл бұрын
The slow zoom killed me. lol
@plumbum65583 жыл бұрын
What brand of wood chisels do you prefer?
@nw24153ns4 жыл бұрын
As a newbie would you recommend a push block, a gripper and a push block, two push blocks or maybe just one gripper to try? I have some table saw experience and I'm just working on small and medium sized projects. I'm just interested in your opinion. Thanks!
@woodwhisperer4 жыл бұрын
I'd start with a push block and a good push stick. It's important to understand what's going on at the table saw and what makes a push block different than a GRR-Ripper. GRR-Rippers aren't cheap so you should know what it does and how it works to decide for yourself if the value proposition is there. I love the GRR-Ripper but I don't use it that often....only on cuts that would be questionable any other way.
@pcicchin4 жыл бұрын
Make sure you use a SAFE push stick, and not just a stick with a notch like a lot of saws come with. kzbin.info/www/bejne/baWTYpefZdBlnqs kzbin.info/www/bejne/aHmlaoasaciAnc0
@bcrou7122 жыл бұрын
I'm dying laughing. I love your videos man
@brian4544544 жыл бұрын
Making a wal”nut” sausage holder for your next video? Or will that be a guild project? (Unless it’s too small for the guild.)
@PrimalEdge4 жыл бұрын
always a great video
@mtabernig4 жыл бұрын
Your fly was open AGAIN>>>>>>LOL
@justinjones92554 жыл бұрын
Thanks for the inspiration because I was needing to build holders for a router plane and card scrapers. Can you tell me your source for the rubberized cork sheets you used in the chisel holder?
@daleatkinson34534 жыл бұрын
LOL, I don't care who you are thats funny!
@yellowsnow30004 жыл бұрын
The wood's definitely whispering 😏
@chm17014 жыл бұрын
Some nice ideas here, even if some are plagiarized 😉 Out of curiosity, what made you choose the Veritas router plane over other brands, please? I’m considering either the Lie-Nielsen and the Veritas. Thanks.
@woodwhisperer4 жыл бұрын
I can't comment on their current offerings since things may have changed, but at the time when I purchased Veritas was the only company making a wide range of cutter shapes and sizes. They also have a really nice locking mechanism and removable blades that make sharpening easier. The splayed angle of the handles feels better in hand as well.
@thallmeister4 жыл бұрын
0:40 I see you found a way to keep your channel name while simultaneously bringing in a whole new demographic.
@scottdunsmore83554 жыл бұрын
OMG. Nearly peed myself laughing. I think you were set up by @twwjason.
@SpydieFan4 жыл бұрын
Nice quick project. I think I’ll be using the same chisel holder design. What was the oil you used to finish?
@woodwhisperer4 жыл бұрын
Just some walnut oil.
@janitor66694 жыл бұрын
That zipper thing can only happen when you put on your sponsored trousers in a hurry because you normally don't use them in the shop :D
@williamellis89934 жыл бұрын
Everything looks great even though it was overkill. You didn't support the mallet handle, just the head. Are you slipping?
@woodwhisperer4 жыл бұрын
I got tired.
@wickedwoodgaming14863 жыл бұрын
I gotta say. I'm a veteran, so I have a pretty dark sense of humor. If I was drinking milk. You would be liable for me spitting it on my phone. That bit when you pointed out that you didn't know your fly was down was so, simple stupid. Lmfao!
@AutotechWoodworking4 жыл бұрын
"Try not to stare at this" appears on the screen with a large arrow pointing downward to the left. So what do I do, my eyes follow the arrow to see where it's pointing and I then automatically avert them to look elsewhere. The camera then slowly pans down while zooming in and it gets harder, (no pun intended), to look at anything but where the arrow had pointed. I couldn't help but laugh though. What was this video about again?
@madrox41324 жыл бұрын
So how long after this did you order that concave spokeshave?
@MauricioGoncalves.4 жыл бұрын
Nice!
@jeffreysmith50184 жыл бұрын
great video, great ideas! I had to watch it twice though, I thought I missed the Duggee break, but no. No such break, sad :(
@woodwhisperer4 жыл бұрын
Duggee was busy destroying another set of earbuds.