Cbr F2 Streetfighter build "Timelapse"

[@cdcss]

By far the sickest F2 street fighter I've seen.

[@unrolodeporai]

Thanks buddy

[@mastergunzz]

Hey man, I know you have heard this a thousand times but this video was freaking great. I have this same bike in my garage and the plastic is all busted. I've been trying to figure out what to do with it and wasn't aware of the streetfighter thing. Thanks for the inspiration and I'm starting on my bike tomorrow. Thanks again!

[@thomasgolania5303]

mastergunzz what year is this bike?

[@mastergunzz]

I'm gonna say 93. That's what year mine is. I think the F2s are 93-94.

[@Lucianoveloce]

how did ur build come out ?

[@bustarogers9990]

Lee Johnson ...did you finish your build , or did it never get going mate???.

[@vytas5584]

That is amazing. I am sure the work was 20 times harder and more involved than it seemed

[@eric62backstrom]

My first bike was this same model and livery with the pink stripe removed. same slip-on. very nostalgic!

[@STLCBR]

Just came across this. Looks good! Glad to see more people have done the r6 tail swap since I first posted 4 years ago. That was my first bike and first project. I'm now on my 6th bike and yet I still miss my fighter... Only input I have is the front fender, lose is or chop it down. It's the last piece of bulky bodywork on the F2 and just doesn't it the look. It's the only thing left that gives away that it's a 20 year old bike. Hopefully I'll come across one for cheap and recreate my first bike... this time in track trim, seeing as I don't ride the street anymore. Looks great and keep it up!

[@unrolodeporai]

I never thought you would see this. Its my first bike and first project as swell. i saw your build on the cbr forum and here on youtube. I wanted to thank you for documenting it. I would've never done it if i didn't have a blueprint available like the one you and r1sabotage put out there.

[@travisguide4516]

a tear came to the eye when the frame butt got its tail chopped i guess this did end up great good job

[@unrolodeporai]

Travs Guide non of your tears where in vain. the frame butt will be remembered

[@Yelwas]

Wow what a quick worker, looks like it was done on saturday afternoon and finished in time for tea

[@nohate4shit]

amazing... getting a CBR 600 f3 1998 to build a streetfighter stunt bike ....your ✊✊✊✊✊👊👊👊 👍 wow

[@andrewlawson3798]

From ugly & dorky to slick and cool. Nice ride man 😎🤙🏽.

[@agentx4315]

Not bad brother. Solid build. If you shave down the front of the front fender to match the back of the front fender it will look more aggressive. I did that with a dremel on my F2 streetfighter. Shows a little more tire and makes it look more modern. Great job!

[@matts5936]

I was stumped with what to do with the ugly seat glad I watched this

[@f0rmula09]

excellent build man. Im looking to do a Salvage Build into a streetfighter just like this and it gives me alot of good ideas. keep up the awesome work!

[@mikesnow.]

Super nice! Great work dude.

[@ryfayuznisoul]

I love your bike bro....I have a CBR 250 but i don't know how to make it beautiful. ..you are my inspiration brother... Your fan from Thailand. God bless you. Yuzni

[@unrolodeporai]

Thanks for the kind words Yuzni. I'm no more capable of doing a build than you are man, lol. For some reason when we see people do cool things on youtube, we seem to put them on some kind of pedestal. Non of us are born knowing how to walk, talk, change a tire, or build a streetfighter. You just gotta find the knowledge, and jump into a project. Don't be hesitant, it's all just nuts and bolts.

[@ryfayuznisoul]

Thanks bro...I really want to do something on my bike...but don't know where to start... God bless you bro and thanks for replying my comment...

[@Mk2escortcossie]

Sick fighter fella, you have given me inspiration for my build, great song choice too

[@unrolodeporai]

That makes it all worth while. send me a picture or video when your done with it.

[@ralphbove]

really nice job mate. That bike looks great. I am in the middle of a 1991 GSXR 1100 street fighter build.

[@LancerFIN]

Sick build man and at so low cost. If bike insurance was cheaper I'd get some old bike and turn it to a streetfighter/stunt. Something I could trash on and not care if I dropped it.

[@govnor1495]

Totally awesome! Excellent build and excellent vid.

[@ScorptionF24]

La mejor que vi en mi vida, hermosa!!! Estoy enamorado. Voy a intentar llegar a un f2 y transformarla a streetfighter 😍

[@unrolodeporai]

Has un video cuando la transformes!

[@hectormayen8522]

great job you got talent

[@alyk.sultan5741]

Great fucking work man what a transformation

[@jodymccleary6193]

I just started my street fight F2 build yours turned out sick

[@edisonbruh5034]

Viva Colombia papa! Te quedo severo el video

[@travisguide4516]

yayy funny comment the purple f2 with nice original fairings has been my dream for a while i found one in riverside now i need 2500 such a good price!!

[@jonnysmitty7538]

rad man. looks completely different.

[@unga6057]

you are just amazing. i bought the same bike but i dont know how to fix it like you, you inspired me though

[@panchovillaxx7]

Just amazing job,great job!

[@unrolodeporai]

Thanks Pancho

[@andresdafonseca347]

Eres bueno para las reformas, buen gusto excelente trabajo

[@jimtoone1777]

Love it! 👍🏻👍🏻👍🏻

[@olav6008]

can you pilz link the Tail Rear Fairing ? amazing build !

[@redactedrider7606]

I'm really late, but it's an R6 fairing

[@lan4z346]

@@redactedrider7606 can you tell from the model of which year

[@p.chakraborty4453]

Incredible work

[@gasm101]

Wow! Le quedó suuuper bien.... estoy pensando en hacerle algo asi a la mia... es una CBR929RR año 2001.... felicitaciones por ese buen trabajo!..

[@unrolodeporai]

Muchas gracias. Me encanta la luz de la 929, y el estilo no se ve tan biejo como la mia se veia. Si yo fuera usted, no la cambiaria. Pero esa solo es mi opinion.

[@gasm101]

unrolodeporai si tiene una linea bonita... pero hace poco se me quebró el foco precisamente... y por eso he pensado en esta posibilidad, pero debe de ser bastante complicado...

[@unrolodeporai]

Tavo929RR ni tanto. en la descripcion del video puse el youtube de un senor que hiso lo mismo pero el esplica todos los pasos que el siguio. se llama R1sabotage

[@gasm101]

unrolodeporai aaah pura vida... voy a ver el video y tal vez me animo a hacerlo!

[@Rayza92]

Looks like an adventure/ cruiser to me.

[@MightyForSure]

I don't like that seat, but I gotta say, it looks fantastic. Great job

[@unrolodeporai]

MightyForSure Thank s buddy

[@serferito6]

Very nice job brother. I'm doing a 650r now as my streetfighter bike. What prep work did you do before painting the Engine aside from masking? Yours turned out awesome!

[@Sk8taren]

Did you just cut the frame and drilled new holes for the tail? And how did you paint the engine/frame? By the looks of the timelaps it looks like you just painted it on the frame/engine without screwing everything apart. Look INSANE man, good job!

[@PaleHorse68]

Awesome video and awesome job on that bike bro. Seriously. You made it look ridiculously simple too. One suggestion? Lose that front fender. It looks really old compared to the rest of that badass ride.

[@marcelrivero4509]

Richard ya tengo el video uploaded......unrolodepotai, thank for the inspiration brother. I made mine like yours. Great job

[@kungatsering9533]

beautiful bike.

[@LETSGOLIVGAMEING]

Awesome I'm about to start doing that when I bring it to P.A

[@ericforeman1562]

Came out way better than I was expecting! Is the rear seat just for show now with the sub frame cut tho? 😂

[@marcelrivero4509]

Muchas gracias richard. Hoy acabo de terminar la mia

[@unrolodeporai]

muestranos como te quedo

[@HaxoReSc]

I bet a dirtbike handlebar would have been killer on this one!! :D

[@unrolodeporai]

HaxoResc you don't even know how bad i want a taper bar man. it would be so much more comfortable too, for long rides and slow maneuvers. but sadly i'm a broke college student and don't have the money for new bars and brake lines and such. but i agree, they would look KILLER on the bike.

[@z24zach]

unrolodeporai I'm doing the same build with my f3. I put on a set of pro taper bars I never had to get any extensions for throttle or brake lines. Just a little re routing that s all. Also man how do you mount the seats?

[@thewizard2842]

Nice man! awesome work

[@unrolodeporai]

Thank you buddy

[@carbonxhawaii]

BadAss!!! Thanks for sharing.

[@lanemengon1406]

That tail swap tho... How much did that cost to do man? Im looking at tail swapping mine, mind liking the article or reference of how you did that? Thanks bro!

[@mrwiltonchan]

Also does it still have the lock latch to open the seat to store things?

[@ozdemirmelih]

just awesome man, good job

[@eero-heikkipuustinen6393]

Very nice job!

[@LETSGOLIVGAMEING]

It looks sick dude

[@mudbonejames3287]

iv got the f3 sitting around from back in the day..ill do a strretfighter..what did you with electronics in the tail..and the nose to get a single headlight set up..cool vid

[@michaelcolasante8522]

Hey great job, put a lot time and money into it, and all paid off well, looks great. I saw your review on amazon for the bike master turn signals and that brought me to your video. I just installed the same front turn signals but I cant get rid of the hyperflash problem. Maybe I wasn't using the included resistors correctly but I went out and bought a set of 6ohm 25 watt resistors and installed those, and they worked for a bit but now the signals have gone back to hyperflashing. Did you overcome the hyperflashing issue after installing the LED signs, if so, how?

[@CankoKaracenow]

wow bad ass bike

[@kg3Mali]

That's awesome man

[@unrolodeporai]

Thanx buddy

[@bambinodj87]

Wooooooow you are a genius !!! I want do like you !!!

[@loganfalzon2264]

love the rear fairing around the rear brake light anyway you can link me to where you got it from

[@acmesnay]

Wooo amigo neta espectacular . yo amo las f2 y f3 y siempre e querido a ser una a street ... Una preguntota que colín usaste

[@Estechico321]

I want to make one now that is so awesome!

[@sunny820]

Great build, love the outcome. Inspiring me to try and do work on my own bike.

[@Kirtlandhornet52]

Thanks again. Sorry for asking so many questions... Your bike is so sick. How did you repaint too? What did you use. And what did you use to red stripe the rims?

[@TheMelissaChronicles]

this was really great and inspiring to watch. I got so much questions but one is, did you take the engine apart to paint the whole thing, or did you really just paint the frame and engine at one go?? Awesome build man. I have a 92F2 I'm planning on doing.

[@Baltimoreborn]

Awesome 👍

[@samgordon97]

what a transformation.. wow

[@unrolodeporai]

Thank you Sam, means alot!

[@lucianoadrian9706]

capo... un trabajo genial

[@loganerwin9654]

So u don't have to cut the frame at all if you want to switch up the rear plastics on cbrs? I want so badly to build a street fighter out of a older sport bike but that tail section grosss

[@wesleyzimmerman106]

Can you please tell me how you installed that r6 subframe to the bike. I'm trying to do the same thing. Could use some pointers.

[@Cesarolmos7084]

hermosa!!! te quedo genial, yo estoy apunto de comenzar mi proyecto tengo una kawasaki zx600 modelo 2006 ti vídeo me inspira

[@lr1810]

What did you have to do to make that r1 tail/seat fit? Did you just have to cut that small rear section of the frame??

[@diamondchip8680]

the same thing i was tinking , its cool like fuck

[@rmalanconi]

inspiring work, What you did with the electric wires in the back?

[@tachedout5325]

super sick

[@Gueroeck22]

Amazing!!! I love it

[@hinscho7]

cool! looks great!

[@nequr3234]

amazing mate

[@zoid450]

damn dude beautiful turnout

[@oldjcb]

good job dude

[@unrolodeporai]

Thanks amigo

[@juanantoniosototerrones8550]

Very chingona I stay but hey I have a doubt, did you make a comma or did you buy it?

[@TheOGChicken]

where did you put that little relay and box at once you cut the subframe

[@xhuger1]

Hey man awesome job man. I've got an 98 crb600 f3. Thinking about doing the same thing. Any chance you can shoot me some links on where you got your parts? I'm having trouble finding good ones.

[@danielquiroz7866]

q chingoooon poca madre, yo ya me estaba emputando pero q xabrona quedó esa moto

[@arisl4071]

I see what headlights, tail lights and speed meter you used my question is where did you get the seats? Would you mind emailing me all the links where you got the parts? I just started taking my 94 CBR600F2 and since I am taking the engine apart due lower cracked on crankcase I'll paint them at the same time. Thanks in advance and I love the outcome.

[@devorsa]

GREAT !

[@RayRayLitFam]

Dude this is sick. Im going to be doing a 94 f2 Street fighter build in the upcoming weeks. Loving the front light. No bad blood if i get one too? haha. Kick ass man. Ride safe.

[@unrolodeporai]

Thank you Ray! Did you end up working on that f2? Any pics or video?

[@alangraddock4199]

Awesome streetfighter..... Great video! I've got a 1991 cbr600 fm and I've just started turning it into a streetfighter please could you tell me what you did with all the wires around the headlight as I'm struggling to hide them as well as you have! Also what clocks did you use and was it plug and play?

[@jeffreypreston7675]

Nice job dude, love the new tair fender fit. Taken from a Kawasaki maybe?

[@unrolodeporai]

+Jeffrey Preston Thank you. It's taken from a 2006 yamaha r6.

[@cesaraltamirano2273]

I c..btw ur came out looking good ..

[@unrolodeporai]

Thanks alot man.

[@LanternNick]

sweet build man. Where did you get your new gauge cluster?

[@unrolodeporai]

It's a KOSO DB-01r

[@mordusy]

Hi great looking bike. Did you manage to spray it with engine in place ?

[@kbradshaw880]

hey i need a little help with this set up. I've cut the subframe 6inch sane as you but i can get the trail on the right way. i want to know, were you able to use the under tail with the rear fairing? how did you get the seat and cowl to mount on? can you please type up a summary of what you did to make it all work?

[@devone744]

What did u do with the cords from front light?? Do they hook up into that headlight u got. What headlight is it??. How did u hide cords?

[@Hanyzek149]

Nice, very nice...

[@unrolodeporai]

Thanks buddy

[@MaNamelsBen]

if you dont mind me asking.. how much did you put into this build? looks BAD ASS btw

[@BlueNETGaming]

Can you just paint over the engine?! And what clustergauge did you use?

[@MegaKuba2010]

From what motorcycle took back the plastic?? З якого мотоциклу взяли задній пластик???

[@mikebalzerhuge]

Awesome job man. Just curious when you went to put that tail on, did you just bolt it right up? Or did you drill some hole's? Thx!

[@unrolodeporai]

my plan was to have a support bracket made and welded on to support a passenger. It ended up being too expensive for my small college student budget so I made a tale myself and now it's a single rider bike. imgur.com/Ny3IPzX.jpg

[@juanfe5240]

Que chimba parcero! Estoy a punto de empezar un proyecto, pero a Cafe Racer también con una F2. Vos me podés decir por favor, como fue la vuelta de la pintura... Osea, a punta de spray el chasis y el motor, ¿como te fue? ¿Rust Oleum? Gracias de antemano y la mejor energy.

[@Gummymonkey79]

Best video I've seen of a transition to a street fighter How long did it take you to do this Thinking about turning my 99 gsxr 750 into a fighter

[@unrolodeporai]

Thank you Ethan! It took about 6 days. About 30 hours of work. If you work on your gsxr, consider making a video! It would be cool to watch.

[@kylegursky1446]

Where did you get the seat and lights?

[@marcelrivero4509]

muy linda quedo. donde compraste esa luz de adelante si se puede saber....gracias

[@felipem.cavalcanti5014]

Sickk!!!!!

[@drufovka4543]

Colombia, papá!

[@Johnsmith-ix4hl]

Hey man, this bike looks amazing. I just picked up a CBR600F2 and its all messed up. That bike looks amazing! Absolutely stunning! I know you have gotten this a couple of times from other people. But the rear tail section from the r1, I know you said you changed it, but could you have kept it, and just not rode a passenger? I'm thinking of stealing your idea due to the fact the PO cut my tail section of my frame, and when I mean cut, I mean he cut almost all of it off. Any Help or knowledge from trying that seat would be greatly appreciated