Thank you for all of your presentations with great insights 🙏 I just purchased that Bauer Belt and disc sander for $120, on sale from $149, and waiting for delivery.
@andre1987eph6 ай бұрын
How do you like it?
@OilNBolts12 ай бұрын
Nice review, very comprehensive. I'll pick one up tomorrow.
@Boudreaux91111 ай бұрын
Great video OG! I just bought one on sale for 99 dollars. Thanks for sharing video 👍
@SpadeAce Жыл бұрын
Just got mine for $80. Not really sure how it all happened, but I was going to buy the Central Machinery one as I only need it to smooth out 2' pieces of hardwood that I've resawn. However, when I went to make the purchase, the central machinery one was removed from my cart and set to "in-store only", which wasn't going to happen as it's 2 hours away and with an old 460 I'd end up paying over $100 in gas to get it. So, I put the Bauer in the cart, went to checkout, saw it was $79.99, made the purchase instantly. Lol. Can't beat $80 for it.
@PerrynBecky7 ай бұрын
I just bought one today for $120 on sale. I tried a piece of sample wood that came with it to see how well it performed. So far, I really like it. I didn't even have to adjust the belt on mine. It tracked true right out of the box. I was impressed.
@opa_plays_mw53183 ай бұрын
Just got one today, wet the rag with acetone, turn on the machine and wipe away residue.
@BigBear-- Жыл бұрын
To clean the left over adhesive on the disk, I'd just turn the thing on and have your soaked rag ready with whatever solvent you're using. Then just touch the rag to the wheel while its spinning, rub it up and down until the adhesive is gone.
@bedells93898 ай бұрын
Be careful using solvents around running electric motors, as they are typically flammable.
@BigBear--8 ай бұрын
@@bedells9389 Right. I'm not saying pour solvent all over the thing. Or leave solvent soaked rags on it/around it. I don't think you'd blow anything up quickly wiping down the disk surface, in between sanding sheet changes. For something to catch fire a spark would have to physically make contact with the rag, or there has to be a high enough oxygen/gas/fume mixture, in the appropriate ratio range for a spark to ignite that gas mixture. Both scenarios are very unlikely. Though I agree, accidents can happen when not paying attention to what you're doing.
@RogueExploration Жыл бұрын
Thanks OG I'm a fan of Bauer products and after watching this I'm getting one. my Harbor freight belt/disc sander is on its last leg and this looks like the perfect replacement thanks again
@billybob6298 ай бұрын
I like putting 40 grit belt on, flipping machine upside down with belt on floor, turn switch on, then plug in and watch it take off like a Battle Bot !
@syndakitpanda17778 ай бұрын
😂😂😅😅 lol aaaa dayum that's funny
@CIAG4PNP Жыл бұрын
yap, you sold me. this will be my 1st belt sander for my workshop. thank you for your review Sir!
@josephspellman2698 Жыл бұрын
Nice vid! I like the shop set up too. These are on sale right now for ~$100. Going to get mine today. Thanks for posting!!
@arboristo44076 ай бұрын
I just got one on sale $99…works great 👍🍀✅
@DargoDog11 ай бұрын
Great video. Anyone ever tell you that you have the perfect voice for audio books? I just bought one of these yesterday. After looking at a lot of reviews for this particular machine (paid $115), it seems like it is really hard to beat the price for what you get, and the job that it does, especially for us hobbyist. I was a little unsure about the disc change out, and you walked us through it perfectly.
@dougclem77112 ай бұрын
I like that Harlan Sanders, fried chicken!
@edricheson Жыл бұрын
Thanks Old Guy! I needed one for my son and daughters projects
@user-sz5vx8lz9f Жыл бұрын
Взаимообусловленность// Мышление/речь/руки - разум/творчество - родился Человек.
@philstover24222 жыл бұрын
Thanks for the video. I was considering this unit and this helps.
@saintmichael3879 Жыл бұрын
I just bought one from Harbor Freight. I returned the cheaper Central Machinery 4"x 36" belt/disc sander. What a POS that was. I could seize the belt with a gloved hand. And it took me forever to assemble/disassemble it. The Bauer I just bought was fully assembled minus the disc plate. I already have a better feeling about this one.
@jmcnro Жыл бұрын
So the extra $60 is well worth it for the Bauer?
@sloppydoggy9257 Жыл бұрын
Its a great machine for the price, well worth its value. I would say at least for metal I wish the belt was much faster.
@JackSmith-jj3bi5 ай бұрын
When in doubt! Read the instructions.👌
@jimstanton47152 жыл бұрын
I have a Win the only difference I see is the color.
@georgecurtis6463 Жыл бұрын
Found two faults. One is the disc shield is to close to the disc so dust goes over it instead of inside it. So i heated the lip up and moved it a bit outwards away from the disc. Now the dust goes inside. Also the same with the belt dust shield. When flat the dust goes over. So i installed a small deflector on the top. It needs to be bent so when the belt is straight up the shield does not hit the belt. Made that from some milk bottle plastic and two screws. Easy mods.
@rondanko20555 ай бұрын
Buying one today for $89
@xXDanielSilva559Xx Жыл бұрын
I love it
@Minimotomayhem5 ай бұрын
$89 for itc right now
@kale21299 күн бұрын
On sale now for 99.99
@robertmunguia250 Жыл бұрын
That machine is 119$ now at Harbor freight.
@שיצברי-ח5מ Жыл бұрын
Good
@maryfaw5655 Жыл бұрын
I have had good luck with them
@katesutherland6088 Жыл бұрын
Hi Old Guy, Old Gal here, lol. I've had a Wen sitting in my amazon cart a few days now, but you may have changed my mind. So, both sanders must run at the same time?
@OldGuyNetwork Жыл бұрын
Yes they do.
@jimcolson2695 Жыл бұрын
Are there lubrication points to keep the bearings lubricated?
@georgecurtis6463 Жыл бұрын
Sealed bearings
@robertmunguia250 Жыл бұрын
Can you sharpen a chisel and plane blades, knives?
@Divici02623 Жыл бұрын
Can you sharpen knives and tool blades on this?
@LSturboguy3 ай бұрын
is it the 370watt motor or the 500watt one
@OldGuyNetwork3 ай бұрын
500
@bobrenda161810 ай бұрын
Radio voice.
@colemahaney42082 жыл бұрын
99 USD @ HF
@OldGuyNetwork2 жыл бұрын
Thanks for the info!
@justinfisher38272 жыл бұрын
Mine is running backwards could I see how yours is wired?
@brendarunkle8796 Жыл бұрын
I can not keep my belt straight in the middle ive tried turning the knob both ways and not working
@markstrandoutdoors Жыл бұрын
are you making the adjustment while the sander is running? that is the key. turn it on, let it start to wander, then make the adjustment as you let it run.