UPDATED : DeepFake Videos And Photos - FaceFusion 2.6.1 - Google Colab Free

[@EdieWoo]

my deepest appreciation !after 3 days tripping trying to use facefusion , i m so dead with the terminal cmd😭 , finally i come to the interface , thanks so so much !

[@BahaaAI]

Code Updated, Reopen the colab link and use it.

[@TrendKiDunia]

​@@BahaaAI does multiple face swap work in it kindly respond

[@Technicalinvincible]

​@@BahaaAINot working please fix it

[@shivamjhaop]

Please Fix It, Public Url isn't Appearing

[@emanuelngm]

FINALLY a tutorial that works. thank you so much!!

[@rahulvashisth_]

Solved my problem. You earned subscriber

[@BahaaAI]

Thanks 🌷

[@MrDeepfake0]

hello rahul please help me with my problem

[@rahulvashisth_]

@@MrDeepfake0 yes tell me your issue

[@Rohan20707]

​@@rahulvashisth_ Rahul bhai upload video hone mein kitna time lagata hai apke pass? Meri 30 min tak upload nhi hui

[@IsisMeditacionySerenidad.]

a question, I have google colab pro, it just takes me too long to download the videos :( about 1 hour, what can I do to make it faster?

[@BahaaAI]

Code Updated, Reopen the colab link and use it.

[@valentinsalatielhernandez]

mis respetos, eres un master, super agradecido, tienes un nuevo seguidor

[@BahaaAI]

Thank You 🌷

[@tahanymansour9931]

انت بقيت عالمى يا بهاء فيديوهاتك وصلت للأجانب 🎉🎉

[@BahaaAI]

شكرا علي التعليق الجميل 💕 نورتني 🌹

[@ironxar]

It has a problem about to finish video merge. The code does not continue from this: Analysing: 100% 1360/1360 [00:02

[@manuelgold7385]

muchas gracias por el tutorial, buscando facefusion , este si funciona muchas gracias

[@Carlos_0507]

Hello, I've been using your software for a while, great job by the way, but I noticed that in the original repository there is already an update I think it's version 2.4 how could I install the updated version? What would be the change of the first command to install the latest version

[@BahaaAI]

Code Updated, Reopen the colab link and use it.

[@antoniomarella3184]

Hi. I've installed first Pinokio, and after with Pinokio I've installed FaceFusion 2.5.3. I didn't change the basic settings to give a light work to my computer, and tried with a light video (42,6Mb). But I don't even see the first preview frame after hours... Is the work made essentially by my computer, or do I have to be connected on Internet?

[@BahaaAI]

Hi, actually I am not familiar with Pinokio. in act I tried it once and did not work. you can use the new FaceFusion 2.6.0 on colab: colab.research.google.com/drive/1oNmq4llJNcRVt16Iyv_oiG399rwcFXTS?usp=sharing but anyway, FaceFsusion is very slow for long videos.

[@antoniomarella3184]

@@BahaaAI OK, thanks for your answer. I think I'll give up for videos, my pc isn't "strong" enough I think, I'll wait and when I'll change it, I'll see again 😉

[@ShadowDog-y5i]

Please fix it, step 2 not running

[@DanishKhan-d1v3m]

analysing: 100% 198/198 [00:04

[@BahaaAI]

Hi, Does this happen for every video?

[@DanishKhan-d1v3m]

@@BahaaAI yes mate

[@BahaaAI]

Close the FaceFusion page, disconnect and delete runtime and refresh the colab page. Then try again.

[@tantaicover1624]

The old version 2.1.3 uploaded very quickly and was very convenient, but it cannot be used anymore and does not display the photo collage part. The new version 2.6.0 is difficult to use and takes a long time to download. The password number is not the same as the input instructions. The pass code keeps saying it's wrong

[@BahaaAI]

Hi, don't use the IP from instructions, use the one that appeared to you and make sure there is no spaces

[@NTR_manavadu]

in latest 2.6.0.. there are 2 options from step 2, which option we need to choose to do step2 exactly as you do in the video?

[@BahaaAI]

Hi, the tutorial in the video was using an old version, later I updated the code. You can choose any option to use, it is just an alternative in case one is not working

[@expensive-info]

Wow thank you sir

[@BahaaAI]

Most welcome 🌷

[@tranvanninh171]

I added the image and video and press start but the output don't show final video, I have tried many time but it not work, wating for your reply bro

[@BahaaAI]

Hi, what's the error message you got on the Google colab page?

[@katysunnykova]

help!! ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts. torchaudio 2.1.0+cu121 requires torch==2.1.0, but you have torch 2.1.1+cu121 which is incompatible. torchdata 0.7.0 requires torch==2.1.0, but you have torch 2.1.1+cu121 which is incompatible. torchtext 0.16.0 requires torch==2.1.0, but you have torch 2.1.1+cu121 which is incompatible.

[@BahaaAI]

Updated ❤

[@casual_gaming_5]

@@BahaaAI is there a way to run my personal version from my repo ?

[@ruhandevkumar3716]

ยอดเยี่ยม..พี่ชาย..👍

[@BahaaAI]

Thanks 🌷

[@ShortGamer-mj4iw]

still not working option on is not showing the gardio link and the otherone was very slow

[@BahaaAI]

Fixed 2.6.1 👍

[@oanngocthanh9201]

perfect.Thanks!

[@BahaaAI]

You're welcome! 🌷

[@alshadalhabsyi]

work sir ! thanks a lot 😍😍😍

[@BahaaAI]

Welcome 👍

[@its_annhuzic]

Everytime i try to process a video output its saying to select an output path or a trajectory. I've tried changing my file path but its not working. SOLUTION?

[@BahaaAI]

You can restart running the code. You don't have to change anything.

[@SabhMohn]

Hi thanks alot - what is the max video can we use to face swap?

[@pavanakula2824]

Bro whats the max

[@BahaaAI]

There is no max, the problem is it will take longer time for long videos

[@raku9841]

hi my friend i am facing a BIG Problem since days, as soon i click on start, to make the face swap, in the code it analysize it until 58 % and then it stops and shows error, it is already 3 days. i tried even different accounts nothing works. In the past i never had this problems it always worked . and no matter which version i use, it is always the same it analysize it until 58 % and then it stops and shows error. PLS HELP

[@mrflourine]

How can i run these codes without colab t4 gpu?

[@BahaaAI]

Unfortunately this is not possible. The code needs a GPU to run.

[@guzz7775]

tysm man this is works

[@sigmashorts9434]

Showing output with red square on the targeted face ? Please help

[@BahaaAI]

Hi, what is the error message in Google colab page?

[@gwaashiq8753]

Man this is so awesome thank you ❤

[@3ghighspeed599]

Hi, can you upload the latest version facefusion 3 & also google collab is disconnected after few minutes. can you please fix it soon?

[@Innovative_AI]

ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts. torchaudio 2.1.0+cu121 requires torch==2.1.0, but you have torch 2.1.1+cu121 which is incompatible. torchdata 0.7.0 requires torch==2.1.0, but you have torch 2.1.1+cu121 which is incompatible. torchtext 0.16.0 requires torch==2.1.0, but you have torch 2.1.1+cu121 which is incompatible.

[@hkservices319]

nice man what an amazing effort . God bless you

[@BahaaAI]

Thanks 🌷

[@ToetallyFarrah]

im getting and error last few days is everything OK with the program?

[@damianpadilla9631]

me 2

[@AulfaF]

Hello. Facefusion 2.5 (option 1 and 2) doesnt work . Do you know why? Thanks

[@BahaaAI]

Fixed 2.6.1 👍

[@viperblck1]

Option 1 : Running On Gradio I get this error: A module that was compiled using NumPy 1.x cannot be run in NumPy 2.0.0 as it may crash. To support both 1.x and 2.x versions of NumPy, modules must be compiled with NumPy 2.0. Some module may need to rebuild instead e.g. with 'pybind11>=2.12'. If you are a user of the module, the easiest solution will be to downgrade to 'numpy

[@BahaaAI]

What version do you use?

[@viperblck1]

@@BahaaAI 2.6.1 but also all other version are not working

[@carlosbryant5282]

What about a new version with the gradio new vesion?

[@BahaaAI]

FaceFusion 2.6.0 Updated - Google Colab : - colab.research.google.com/drive/1oNmq4llJNcRVt16Iyv_oiG399rwcFXTS?usp=sharing

[@khols13]

cant wait for 2.5.3 xoxo

[@mariorossi-yo3yq]

Hi man, thank you but for two days working well but now pubblic link gradio doesn't appear

[@chiril_m0951]

exactly

[@BahaaAI]

In the updated version, the public link will show in step 2. In the old version, the public link will show in step 3.

[@VictorLNo1]

Well done. That's great.

[@BahaaAI]

Thanks 🌷

[@Mamaesther05459]

Thanks 🎉

[@BahaaAI]

You're welcome 😊

[@dhoti_lal_shastri]

your channel is special

[@BahaaAI]

Thanks 🌷

[@Carlos_0507]

​@@BahaaAI​Hi I left you a message outside the reply box, I just wanted to make sure you read my message because there are a lot and I understand that you can't read them all. please could you update it, a version 2.6 just came out 🙏. Thank you for making such amazing videos

[@BahaaAI]

FaceFusion 2.6.0 Updated - Google Colab : - colab.research.google.com/drive/1oNmq4llJNcRVt16Iyv_oiG399rwcFXTS?usp=sharing

[@santhoshkumar-ch7bk]

suddenly showing error after click the start button in 2.6.1 update. pls give any other update version old one which one work perfectly.

[@BahaaAI]

Fixed 👍

[@maxleon5776]

how do we select the face we want to replace?

[@mandimbatop7348]

Can you pls teach us how we can do it on android mobile phones?

[@DietNosh]

Mr. Bahaa Do you have Video Enhancer Co Lab?

[@BahaaAI]

Hi, For now, I don't have a good one, the problem is it takes a very long time to enhance a 30 seconds video. But I'll keep searching.

[@DietNosh]

@@BahaaAI Thanks Mr.Bahaa I will wait for your video

[@shyru9461]

Hola, en este tampoco quedan residuos de los archivos usados??

[@BahaaAI]

Yes. It is the same for any code runs on Google colab.

[@shyru9461]

@@BahaaAI ok, gracias

[@hishadman]

Hi Bro, can you make a .ipynb file for PaperSpace or Kaggle Compatible? I downloaded your google collab .ipynb file on paperspace, but didn't work.

[@sagokaroung]

Woww Genius thanks bro this is what I've been searching for so long you did it bro God bless you

[@BahaaAI]

Thanks 🙏

[@Mufassir-no5vu]

Allow nudity ?

[@ynobeauty]

can you show how we can setup with Kaggle or some paid version?

[@adrienizach]

everything works until the photo and video are merged, it loads up to 100% but when it finishes the finished video doesn't appear on the gradio, can you help me?

[@BahaaAI]

Hi, what is the error message you got in Google colab?

[@adrienizach]

​@@BahaaAInone, it just keeps loading endlessly

[@jamalsharaf-z9z]

Thank you bro for the last add I really appreciate so to use it on cpu locally what are the computer specifications I need

[@aiuki-qt4oz]

when run step two, gradio link not appear

[@BahaaAI]

In the updated version, the public link will show in step 2. In the old version, the public link will show in step 3.

[@dailymemetemplate]

this error showing after opening public link "Your runtime has been disconnected due to executing code that is disallowed in our free of charge tier. Colab subsidizes millions of users and prioritizes interactive programming sessions while disallowing some types of usage as outlined in the FAQ. If you believe this message is in error, file an appeal. Please include any relevant context about your usage. Your compute unit balance is 0. Purchase more To connect to a new runtime, click the connect button below."

[@minhminh8988]

Can I download and run it on my personal computer for personal research purposes?

[@minhminh8988]

I downloaded a video after 9 seconds of processing, which took 4 hours. what should I do

[@MrEd-rr1iz]

Hey buddy ,your code stop running suddenly ,help me out ?

[@eunjiyah]

Bahaa please fix it again.. public url is not appearing😢

[@Janvipatil-]

Failed to execute cell. Could not send execute messgae to runtime : type error: faild to fetch

[@nitinjain-ik1ku]

I am having problem in running the new version plz help

[@BahaaAI]

Fixed, please try again 👍

[@daniyaalaxmi-q6n]

Hi suddenly its not working the option 1 not working at all😢

[@audinatazkia3895]

Why does my reference face only appear in one video?

[@BahaaAI]

Hi, please explain the issue in more detail.

[@eunjiyah]

Bahaa please do face fusuon 3🙏

[@LilianNorton]

Super!

[@mekkicharfi5454]

Thanks !

[@BahaaAI]

You welcome 🌷

[@eunjiyah]

please fix it, it says error and can’t click the gradio link now..

[@BahaaAI]

what is the error message?

[@eunjiyah]

@@BahaaAIwhen you run it, it wouldn’t show the gradio link on option 1. it says error when running it..

[@mdbujold]

Merci tu est le meilleur xxx

[@BahaaAI]

Thanks 🙏❤️

[@zareenkhan-t7f]

running on gradio stop not showing face fusion link

[@nagaomi8618]

Please help me check link, no active

[@BahaaAI]

Code Updated, Please check option 2 in the colab project.

[@SahyadriSparks]

Hey its showing face detection red square on output video how to solve 😢pls reply

[@SibuPramanik-u1v]

Thank you

[@SucrePETIT]

Bonjour, Je n'ai pas l'option 1 dans la version 2.6 (Gradio) . Est ce normal?

[@BahaaAI]

Gradio may have some issues and don't run, use option 2 and you will use the same interface like Gradio

[@zainkhan-du4wj]

how to use update version... facefusion link not showing

[@BahaaAI]

In the updated version, the public link will show in step 2. In the old version, the public link will show in step 3.

[@zainkhan-du4wj]

@@BahaaAI how to use update version... facefusion link not showing

[@bhartstatus77]

Bro...... really last opstion you 💗 to thank you so much

[@BahaaAI]

Thanks 🌷

[@xx8]

استاذ ممكن تنزل نفس الشرح على قناتك العربيه وتهتم بيها اكثر لان احنه العرب مضلومين من هاذه الناحيه ماموجوده شروحات دقيقه وكثيره وحالياً انت تشرح افضل من كل الموجودين باليوتيوب ليس دعم وليس مدح لاكن هذه الحقيقه واتمنا ان تشتغل على هذه الفكره

[@BahaaAI]

حاضر يا صديقي إن شاء الله 👍

[@nitinjain-ik1ku]

When ever i run second cell it shows completed immediately without loading any link

[@BahaaAI]

Fixed, please try again 👍

perfect thank you bro.

[@BahaaAI]

Welcome 👍

[@nazwaunimal2173]

thank you!! it's very helpfull

[@swatrafeek3817]

It takes too long for output what can I do

[@BahaaAI]

Make sure that you are connected to GPU t4 in Google colab

[@swatrafeek3817]

@@BahaaAI how to do that please explain and if I do in face fusion output is not Coming and it always shows error please

[@christiansanchezs3527]

This notebook is not working anymore, i used to use it and now it doesnt. I would appreciate a lot if you could fix it. Hope you are great.

[@jamalsharaf-z9z]

there is something goes wrong after analyzing the program stops working

[@BahaaAI]

Code Updated, Reopen the colab link and use it.

[@PriyaRoyboutique]

Public link 🔗 is not showing in 2step before run

[@BahaaAI]

In the updated version, the public link will show in step 2. In the old version, the public link will show in step 3.

[@PriyaRoyboutique]

I know but the problem is in the updated version.

[@PriyaRoyboutique]

There is also a problem in the old version so please check

[@ADGTHEOG]

yoo! Brother .. can you make a video on training a rvc model .

[@BahaaAI]

Done, watch it on my channel

[@vinivinsmoke3168]

I've try many many times still not working. please answer me.

[@Mamaesther05459]

Can you please show us how to change face in main streams

[@BahaaAI]

I will work on that in the future 👍

[@STUDYSKAND]

How much video can handle the app?

[@Rajkumar-yv3lf]

Can i do these stuffs on Android phone??

[@BahaaAI]

Yes 💯

[@palograff]

THANKS!

[@lifeofpi4806]

Public url not working please fix it

[@Drados_90Hamza_100]

Toooooop ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@BahaaAI]

Thanks 🙏

[@Learn_Skills11]

How to change face in realtime, for livestream or video calls

[@paul-f7r]

Thanx for this. On your tutorial, the swap is of good quality, but mine isn't, it's very blurry and jerky. How can I improve the quality ? How can i contact you for partnership ?

[@BahaaAI]

Hi, thanks for your comment 🌷 Check the face enhancer option. Also try the frame enhancer option in the top right section.

[@paul-f7r]

yes, I did that, but there was a problem with the GPU ram...@@BahaaAI i have this message :"torch.cuda.OutOfMemoryError: CUDA out of memory. Tried to allocate 7.97 GiB. GPU 0 has a total capacty of 15.77 GiB of which 2.48 GiB is free. Process 69285 has 13.29 GiB memory in use. Of the allocated memory 10.61 GiB is allocated by PyTorch, and 653.94 MiB is reserved by PyTorch but unallocated. If reserved but unallocated memory is large try setting max_split_size_mb to avoid fragmentation. See documentation for Memory Management and PYTORCH_CUDA_ALLOC_CONF"

[@paul-f7r]

How can i contact you ? I already send you an e-mail.

[@roronoazoro11138]

i cant download the video in 2.6.1 what should i do?

[@FatihGültekin-x9k]

Thanks

[@nagaomi8618]

I cant upload video in 2.6.0 version, please help me check.

[@BahaaAI]

Fixed 👍

[@phreakii]

2.1.3 in video, no 2.6.0 .. Sad

[@BahaaAI]

Fixed 2.6.1 👍

[@tranvannam5337]

Can U update to face fusion 2.5 ??

[@BahaaAI]

Code Updated, Reopen the colab link and use it.

[@tranvannam5337]

@@BahaaAI Can i give U a hug. i love U :))😁

[@ILIYAILIYA-he3tl2]

error Your runtime has been disconnected due to executing code that is disallowed in our free of charge tier. Colab subsidizes millions of users and prioritizes interactive programming sessions while disallowing some types of usage as outlined in the FAQ. If you believe this message is in error, file an appeal. Please include any relevant context about your usage.

[@erikgi9187]

bro I installed all and gradio too but when I start the process for merge the two videos nothing happens

[@erikgi9187]

the process stop at "analyzing"

[@BahaaAI]

Ho, what is the error message you got in Google colab?

[@erikgi9187]

@@BahaaAI hey I fixed, but I have another question, how I can copy all the folder of the files in my Google drive? Because everytime I need to download all the repo from zero. There is a way to download all your folder in my Google drive so I can start face fusion quickly ? Thanks.

[@BahaaAI]

Will work on it 👍

[@erikgi9187]

@@BahaaAI thanks Bro, waiting updates.

[@nitinjain-ik1ku]

Error

[@BahaaAI]

Code Updated, Reopen the colab link and use it.

[@shivamjhaop]

Public Url isn't Appearing On Second Step, Plz fix it

[@BahaaAI]

Fixed 👍

[@serkanguncan]

very good

[@BahaaAI]

Thanks 🌷