UPDATED: How To Remove & Install Your TIPM (Fuse Box) & install doing HARD RESET - Full Tutorial!

Here is the most updated step by step tutorial on how to remove & install a new or rebuilt TIPM / fuse box on your Chrysler, Dodge, or Jeep vehicle, and do the hard reset to install yourself! Feel free to contact us below with your tipm needs!
Email: [e-mail] Call: 818-793-7888 or 818-798-5558
Visit our website to shop for rebuilt & new tipms / repairs:
tipmrebuilders.com
Mak shows you how to remove and install your TIPM, including a hard reset and all the tools you need to get it done.
If you are interested in purchasing a rebuilt TIPM from us, or getting your TIPM repaired, please contact us at 818-793-7888 or email us at [e-mail]
We have rebuilt hundreds of tipm's for our customers at a fraction of the cost of going to the dealers! Feel free to contact us with any questions! Have a great day :)
How To Remove & Install Your TIPM (Fuse Box) & Hard Reset - Full Step by Step Tutorial!
If you need to get a new or rebuilt tipm, you do NOT have to go to a dealer and pay crazy money to get it installed, you can do it yourself in under 30 minutes! We show you how to remove, install a new or rebuilt tipm / fuse box, and install it yourself doing the soft and hard reset procedure's. We have sold thousands of tipm's to our happy customers and are happy to help you get on the road!
- Tipm Rebuilders

[@TIPMRebuilders]

If you could take a moment to share your experience on our Facebook page, we would be incredibly grateful. This feedback helps us grow and ensures we continue to provide the best service possible. Thank you for choosing Mak’s! Here's the link: facebook.com/TIPMRebuilders/reviews 🌟

[@tonybozzelli287]

Beware. Before starting this work you should record your anti-theft security code. Ask your Chrysler dealer.

[@jackiebender3235]

Yes! You are a lifesaver! Dealer wanted 1000.00 to change mine in my jeep wrangler and thanks to you it saved me about 700. Yes you can do it yourself. I did it and I'm a girl! It took around 1 hour total...wasn't hard at all. Thanks alot!

[@gerardogrillo5848]

Congrats Jackie enjoy your Wrangly :)

[@TIPMRebuilders]

awesome! thanks so much for the wonderful comment, Im so happy I could help!

[@mikeyates1730]

Mak is good ! I sent my Jeep TIPM to West Coast of America after watching his video. It was rebuilt and arrived back in the UK 6 DAYS later . Saved me a lot of £££. THe videos are super helpful.

[@bignigga551]

2017 jeep wrangler no start issue..nobody wanted to work on it my mechanic said bad TIPM next mechanic treated me like dirt told me how hard it would be to get unit programed told me it would be in the 1000s ...contacted maks mailed my unit in back in a week from across country ...installed per their directions and this video ...bam jeep purring like a cat these guys are my hero ...under 300 bucks they saved my life thanks a million I highly recommend!!!!!

[@ironman1518.]

THANK YOU!! That stupid box from Chrysler is a nightmare, stupid design, You are a Life Saver!!

[@harveyhams1572]

Trying to learn more. You are like most of the best instructors I've had. Not polished, but very informative and very thorough.

[@kennethstierli5589]

Matt , I can't thank you enough for the video to restart the TIPM , you saved me a boat load of money

[@ironman1518.]

I just installed the re-built TIPMS WITH the better quality relays installed by you guys. Very easy to do following your instructions! It appears that a "check engine light" fault for a P0700 had gone away; we will see after we drive it around some. THANK YOU guys!! YOU guys all Rock!!

[@cesarbarrales7223]

Did the p0700 appear again?

[@israelmendoza2421]

Thank you, thank you, thank you! Great helpful vid. After a week of swaping parts and trying to figure out why my Jeep Wrangler was in "limp mode," i finally discovered that mice had chewed through at least one of my wires underneath the TIPM. I had no idea how i was going to get underneath and fix the cable. I learned a lot of helpful tips like how to hard reset and how to properly connect and disconnect from the battery. Your vid saved me (and most if us here) valuable time and money. Thanks again!

[@Data-Z]

Damn mice got mine too. They coat the wires in peanut oil...crazy

[@jobinjoseph7441]

The hard reset really helped my No Crank No start issue with my Chrysler Town and Country 2006 model issue. Thanks for the information...

[@bearded_beast]

I just got a used 2011 DGC, and having signs of my TIPM going bad, I was worried how hard this was going to be as I do most of my own work to save money. You my friend showed literally how plug and play this is. Thanks!

[@TIPMRebuilders]

I am really glad that we were able to help you out Gharrett! If you happen to need anything else please do not hesitate to contact us. Have a good day!

[@amazonfirebook]

@@TIPMRebuilders Mak. I just saw this video. We had issues on my son's 2019 ram 1500. We had the dash errors going off like crazy. Brake light, wipers, abs, everything. We replaced the TIPM and seemed to work fine for about 10 miles then same issue. We can disconnect the ground for 20 minutes and put back on and seems ok for another 10 miles or so then same thing happens. Dash warnings, wipers come on, won't start. Can we now do the 12 Second ignition on? Or the tying the neg and pos together overnight if that doesn't work? Thanks for the video. Well done.

[@DarkRider2k3]

In-law is going to buy the TIPM from you guys this week. Coming down for Memorial Day weekend. It's nice to see that the reset can be done in a simple manner and without dealer scan tools. I was always under the assumption the VIN decoding had to be done by them but this shows otherwise! Going to save her a ton of $$s which I'm excited for.

[@EH-xs8cx]

Outstanding video!!! We had a TIPM failure on a cross country road trip. Maine to Montana. Found a used TIPM in Montana. Total repair cost was 125. Dealer wanted 1700 for part only. Many thanks

[@stephenmehallo3902]

Fantastic teacher! Evens explains the "hows/whys and cautions" when removing/reinstalling a TIPM. I will contact you shortly to order one for my 2016 RAM Cargo Van Tradesman as a $100 diagnostic revealed my TIPM was bad (no brake lights and erratic turn signals)

[@Data-Z]

Huge thank you. Mice chewed my Jeep wiring, getting that thing apart was a mystery until I saw your video.

[@walterchapman2884]

The best one I've seen on KZbin !

[@cdavid001]

Great video I own a 2011 Dodge Ram 1500 with a 5.7 I haven't had any issues yet I got a little over a 100.000 miles on it right now and everything is working good so far I guess I keep my fingers crossed to the next time thanks.

[@debdahlmann1239]

After my soft top leaked on my 2015 jk my lights and wipers would not work. I checked the fuses and they were all fine - so I tried the 12 second hard reset and that did not work - so I pulled the battery cables off exactly like this instruction - left the jeep that way for 3 hours and reconnected. I did another 12 second reset jic and now everything works! Thanks for a great video!

[@slim56]

I bought one of your rebuilt tipm from you for my 2010 caravan. It worked perfectly I’m very happy with it. Saved me a bunch of money!

[@TIPMRebuilders]

So glad to hear!!! thanks!!

[@sergiomontero7007]

@@TIPMRebuilders hello, i like to know your contact, do you have WhatsApp?? Write me your phone

[@TIPMRebuilders]

@@sergiomontero7007 [phone]

[@TheInnerenigma]

Thank you, this was so helpful! It took maybe half an hour, start to finish!!

[@alram5664]

Just installed a TIPM you guys rebuilt. After the reset my horn and wipers are going crazy. Sent you a message, hopefully this time you'll reply. I keep dumping money on this van because it's low miles and in mint condition. Never will I buy a Chrysler product again, or waste money on these rebuild services for that matter.

[@DrDonri]

F.Y.I... These guys are legit!! With this insight (and a few of their others videos) i replaced the tipm in my 2016 dodge ram... Solo... I left a comment, they responded expeditiously.. Even inisted that i call in if i had any questions. I gave them a call only to find that they are extremely helpful, professional and polite.. #Im very grateful... Thanks🙏

[@jorgedavilapayan]

Mac thanks for your help in this video! your are really appreciated

[@tayninh69]

You sir are a great teacher, thanks for the info.

[@williambishop4692]

Super video. My 13 Town and Country has ABS and ESC and BATT lights on and this is just what I need to get it fixed. Will order shortly. Thanks again.

[@stevetoews9984]

Your a God! Thank you so much! I have a 2010 town and country 4L. I put in a tipm in from a 2010 journey. I didn't have to go to the dealership! So happy. They were nasty on the phone about programming a used tipm. Good I didn't need them! Thank you!

[@TIPMRebuilders]

Hello Steve, We are very happy to have been able to help you out! Please let us know if you need anything else. Have a good day!

[@albertolopez9992]

Is this gonna work for other model like ford?

[@giftofnile]

Excellent instructor, Very clear, Thank You.

[@jstujenske]

Great video, hopefully this will fix the possessed dash and wipers on my grand caravan

[@TIPMRebuilders]

Hi Jake. Definitely try the Hard Reset. Immediately after doing a hard reset, try a 12-second soft reset too. If it doesn't work, call us. I'd be curious to know if 1) wipers are stuck on and headlights too when the wipers are running. There is a specific cause to that combination of symptoms when coupled with dashboard issues (no gauges). If you have all three, call us 818-798-5558. -Jeff

[@ronmoore3987]

Hi Mak ,,,, your advice is solid gold ! I did A 3.5 hour reset on A 2014 RAM 6.7 diesel,,,, and thee said trukk is running good again if it decides to Quit or act up by stalling and then no immediate start,,,,, I will call you and order A TIPM from you....

[@rolanddensonjr2464]

Your video is wonderful. You gained a subscriber.

[@WarszawaScream]

You’re a life-saver for sure; just had to replace the TIPM on a 2012 Dodge Avenger and your video gave all the info I needed to get it done! (And I have zero mechanical skill, lol.) Car’s running great now, thanks so much!

[@racerx3669]

just sent my tipm to you. the front washer on off - rear wash dual relay blew when i tried the wipers when they were frozen. thanks, anthony wing in maple plain, minnesota can’t wait to get it back and to hook it back up.

[@TIPMRebuilders]

Hi Anthony, Thanks for letting us know. We will have our techs dive into your TIPM as soon as it arrives. We will give you a call as soon as it's ready to go. If you have any questions for us please feel free to contact us anytime. Have a good day!

[@johndudeck3124]

excellent vid. im having all dash lights come on while driving on my 2012 ram 1500 and planning to replace the tipm... already replaced win wo correcting the problem. also have to jiggle key 5-10 times to get truck started. once started I have to go into drive immediately and prior to dash board lights coming on .otherwise I cant get shifter into drive. stay tuned if tipm is causing all of these issues.

[@richarddiaz8248]

Thank you for your knowledge and support

[@edwardlincoln5680]

Thanks I needed help with the sum-b

[@sancheztorres35]

Excellent video thanks mak

[@TIPMRebuilders]

Thank you!!

[@daltonepperson2500]

I installed my new TIPM in my 2006 cummins and had no luck on a soft reset and would not fire up, trying to hard reset and hope it fires up. Im the 2nd owner of the truck and it has always been VERY well taken care of so not having it start is stressing me out

[@jcblur311]

The problem with my 2012 Jeep is that although my stock radio works, I have a parasitic draw that I narrowed down to it's fuse. Each night I have to remove that fuse from the TIPM, so that my battery doesn't drain. Would replacing the TIPM fix this problem?

[@TIPMRebuilders]

Hi, Usually a battery drain issue is not the TIPM unless the internal fuel pump relay is bad which would cause the fuel pump to be on after shutting the vehicle off which would kill the battery. The other component that it could be within the TIPM is a faulty IC which is harder to detect without taking that unit apart and testing internally. In any case please feel free to give us a call if you would like to send that unit in for repair or would like to try a rebuilt unit. Have a good day!

[@patrickwilliams7572]

Hello there... thank you so much to sharing a video to us I have a 1998 Dodge truck 1500 5.2 l four-wheel drive how do you remove Tipm

[@EconomicRefugees]

Thanks, what about the guage calibration, where you hold the trip button in until they reset ?

[@TheGeno2001h]

Thank you for your time sir

[@luinpoprns8962]

well my mechanic check all fuses relay did diagnosis key stuck I nhave to disconnect brand new battery put new altinator new everything bush need to install. but no ahhhhhhhhh it's a nightmare

[@r8rfox1971]

Hard reset and new battery fixed my "crank and no start" issue. In the middle of my diagnostics, my truck went from not firing to a completely 0V dead battery. Can a failing battery cause TIPM to act up?

[@pappittosierra8734]

Hello My truck didn't crank at all, getting ready to go for the overnight cables together

[@0verfiend]

What happened

[@joemarotta2237]

Thanks for the great presentation. You explain things so well, and your not a smart ass like some that seem to need to do that to straighten their confidence.. I need to check the connections on the PCM for my 99 Durango. It seems the trans relay does not always connect, causing limp mode. The temporary fix seems to be taking that relay out and re cleaning the available seen contacts from the relay side then reinstalling the relay. Also it seems to not work with new relay I bought, however other components will when I switch them around. Somethings not connecting, long term. I was told the wire harness does not pull out on the 99, you have to take the entire harness out of the car, stripping it down becoming a major project. Any suggestions would be appreciated. Thanks, From Joe M.

[@TIPMRebuilders]

Hi Joe. Your '99 predates the modern TIPM era. Our expertise drops off pretty quickly pre-2002, so I would not presume to be able to provide you a ton of high-quality advice on the '99 architecture. But perhaps it is a wiring issue between the fuse box and the transmission.

[@joemarotta2237]

@@TIPMRebuilders Thanks for the come back. All my wiring is good, even pulled up the fuse relay box under hood,"PDC", and everything looks like new. If I ground the number 2 prong on the trans relay, it shifts perfect, leading me to the PCM. I've investigated almost non stop for a week as to what inexpensive scanner to get for this 99, and I found the Autel MaxiLink ML629 to be a useful tool for transmissions and engine, on this model, and mostly all others. Free updates forever we will see how that turns out. The second might be a couple Launch models, but so many of theirs wont even connect to this 99 Dodge. Can't hardly find negative reviews on my model Autel, which should be here today, "Sunday", so I'm a bit excited. I still do some work on the side so it might come in handy in the projects ahead. THX..

[@shawnfrost8480]

Thanks for the awesome presentation. I have followed your instructions to a “tee” multiple times with no results (passenger headlight not working (bulb is good)). Does that mean I need a new tipm?

[@candylips3684]

So I receive a my second tipm an it still doing the same as the first one. No power when I drive it an the it gradually gain power. But when I put back in the old one, it fine except I don't have light. What should I do...oh yeah when I put the card in drive it sound like I hit a hard pump. But not white the old tipm any suggestions?

[@mikewhite3992]

What's going on with my vehicle when the power wire on the fuse box get really hot that's the first wire that you took off of the food box with the bolt on it

[@abreathoffreshsports]

My Jeep Compass 2018 needs the fuse box replaced. Yet it doesn’t have the tabs to just pull out. How would I be able to replace it without having the dealership do it?

[@ironxYT]

ive got the rebuilt TIPM into my 2013 Chrysler 200S, but the soft reset didnt take. and the dash says 'no bus.' i hate this fender well battery location. but im gonna try the hard reset and see how we do tomorrow morning. this id a great video Mak, thanks man.

[@TIPMRebuilders]

Hello, You are very welcome and please feel free to give us a call if you continue to have issues after performing the hard reset. Have a good day!

[@LesMorrisracing]

Good job. Thanks

[@515Tron]

just a quick question, how long does it take for a TIPM to be delivered after it has been ordered and to be delivered by FEDX.

[@Labj28]

I got a 2014 dodge grand caravan…I removed the Tipm and forgot to connect the battery cables before I removed the tipm, now the van is completely dead. No power at all…any ideas what’s wrong with it? Thanks!

[@JEE7600]

I have an 09 Caliber. There is a power connector in the TIPM so do I still use both negative and positive cables and ziptie them or do I use the TIPM power connector to something else?

[@rschanfish1]

You just mentioned switching two wires on one cable connector if your Dodge Caravan has no front turn signals. I have that problem with a 2009! Could you explain further please!

[@TIPMRebuilders]

Hi Ronald, Give us a call if you have the time so we can go more in depth about the issues you are having and have a good day!

[@jazminalfaro254]

My driver side headlight and left back light sometimes won’t work. My windshield wipers sometimes work sometimes they do as well. Sometimes I push down the fuses or hit the top of my TIPM and they suddenly work. But recently my truck has been having a dead battery in the mornings ? I know is not the battery. Could this be a sign of a bad TIMP?

[@davidbate6346]

Is it a good idea to use dielectric grease on the contacts.

[@wilsonmace3910]

How do I know if it’s the TIPM or the WIN unit?

[@Marlboro900]

So by trying the hard reset it will calibrate itself to my car even if my car doesn’t have all the accessories the donor vehicle had?

[@gerardogrillo5848]

This method works for tipm between 2006 and 2017

[@jordanmichaelhamlin]

Great video!

[@DANDTCUSTOM]

i need some info i have 2007 dodge ram 1500 with a 3.7 my original issue was no headlights i replaced the tipm and now my truck wont start i have replaced it twice and it still wont start but all the lights work now before i sent the old one in for a core it would start and run now three tipm in and it still wont start any help

[@davidaguiar1387]

I hve an 09' routan that is intermitantly not turning over (like battery is completely dead) now and then. Let it sit a couple of minutes and it starts right up. I suspect the TIPM. Quick questions: Does doing either reset cause things like remote start , stereo hard drive, Phone U conect to memory to get wiped out or will all that function as before?

[@TIPMRebuilders]

Hi David, yes it does sound likely your TIPM is bad. The resets will not effect your u connect or remote start.... Im not sure about songs saved on your stereo.

[@MegaHowtoMan]

2007 Jeep Wrangler stuck in Limp mode second gear. Hope this fixes it. Does the 12 second reset work for this year also?

[@megabufu4348]

To hard reset on my 2000 jeep grand Cherokee do I disconnect my PCM plugs and the two plugs near it??

[@FDJT-47]

Will doing a TIPM reset possibly fix multiple electrical issues on an existing TIPM? Such as; all seat heaters and fans, 4wd control switch, all lights, all of instrument panel hazards and auxiliary inverter power. I suddenly have all these things going off when I start vehicle and windshield wipers run constantly. Then about 45 minutes later everything kicks on and wipers turn off. Next morning, same issue.

[@razvanpoenaru]

Thanks for this video, big like from me. The dealer diagnosed TIPM to be faulty because my radiator fan runs almost continuously on high speed, do you think it could be the TIPM? The car is a 2014 grand caravan. Thanks!

[@TIPMRebuilders]

Hi Paul, Cooling fan issues are common to be caused by the TIPM. Are you experiencing any other particularly strange electrical issues in your vehicle? Feel free to give us a call if you have the time. Have a good day!

[@razvanpoenaru]

@@TIPMRebuilders thank you for confirming, I decided to do it with the dealer, should I get the old one back and try to fix? No other issues with the car.

[@TIPMRebuilders]

@@razvanpoenaru Hi Paul, It is up to you in the end. If you would like us to rebuild that unit for you to have as a spare we will be happy to do so!

[@razvanpoenaru]

@@TIPMRebuilders thank you again, it's the company car so I fixed it at the dealer, I asked for the old TIPM back and they asked me $125 core if I want it back so I passed, thank you!

[@TIPMRebuilders]

@@razvanpoenaru You are very welcome Paul. Please feel free to contact us anytime if you have any more questions. Have a great day!

[@joemccall2132]

Really great, learned a lot. On 2d Hard Reset after leaving overnight do I do the Position 1 for 12 seconds then start car?

[@mr.anderson910]

How much is a tipm rebuild for 11’ ram ?

[@brettmckay4793]

After doing a hard reset do we just crank the car and go or do we do the 12 second reset as well or is there another process to do

[@deannal3678]

Is it possible that a bad tipm could cause a parasitic battery draw? 2013 chrysler town and country (not the fuel pump btw)

[@jeremytorres5817]

Can I reset my old TIPM and put back in

[@jrarael90]

Hello! I bought a Tipm from you, for a VW Routan 11, it solved my issue with the fuel pump relay. The only thing I know you mention on your other video, that theres is a connector in which you need to changed some cables? Because my turn signals dont work. Do you have a video of that?? Thanks 🙏🏻 Also, installing the TIPM was easy! Your video helped me a lot! 👍🏻

[@TIPMRebuilders]

Hello, Glad to here that your vehicle is working for the most part. Let's get it working 100% now. Here is the video I believe you are looking for: kzbin.info/www/bejne/rZjShmqAd7aZsLs Please feel free to contact us if you have any questions. Have a good day!

[@jrarael90]

@@TIPMRebuilders quick question, after switching the pins, do I have to do the reset again?? Thanks.

[@TIPMRebuilders]

@@jrarael90 Hello, There should be no need to perform the 12 second reset ,but it doesn't hurt to just to make sure that everything is fully synced up. Please let us know if you have any more questions or feel free to give us a call. Have a good day!

[@eriknobles3946]

Does the 12 sec reset apply for the 2007 dodge caliber sxt. I'm bout to install on my caliber

[@gerardogrillo5848]

Hi Erik...yes, this reset apply for your caliber without problem...i do this procedure for my jeep patriot and have success and works fine

[@eriknobles3946]

Thanks immature try it out

[@llurianaalvarez9520]

Do you need to remove the key after you turn it to run for 12 seconds?

[@TIPMRebuilders]

No there is no need

[@cbw1953]

Can I safely remove and replace the fuse box (TIPM) on a Ram 2017 1500 5.7 if I disconnect the battery without doing the hard reset (Tying them together) and use a memory saver plugged into the OBD port. Would there still be no power to the TIPM? I am a little nervous about the hard reset. I liked your video very much and it is very informative. I did learn a lot from it. Thanks.

[@damon2922]

I have 16 Ram Rebel, just did the hard reset, praying that it works in the morning. How did your situation turn out?

[@robertomijango6207]

this is good video thank you

[@offthebeatenpath5160]

Hi Mak! Bought a rebuilt TIPM from you last week. Installed it the other day and completed a soft reset. Car started wonderfully but the dash lit up like a Christmas tree. The ABS, the swirve control, the engine, the brake, tire and airbags. Everything that we can check works except the brake lights outside. We decided to unplug the battery for 24 hours and after doing that and then another soft reset, the engine light went off but now the automatic doors will not work unless manually or with car key control and the brake lights still dont go on. What do you suggest? We have done a total of 6 soft resets (5 of them after the battery was unplugged). TYIA

[@TIPMRebuilders]

Just curious, when you say 5 of the soft resets were "after the battery was unplugged" you mean, "after having done a 24 hour hard reset", right? I just want to be sure you weren't doing soft resets while the battery was unplugged, as such reset attempts would have no effect. I am sure you meant "post-hard reset". In any event, rarely does a synchronization problem after the initial soft reset occur or last for more than a couple of days. While temporary false dashboard lights after the initial soft reset do occur from time to time, it is this door locks issue and brake lights issue that concerns me. We should definitely talk about sending you a replacement. Give us a call at 818-798-5558.

[@offthebeatenpath5160]

@@TIPMRebuilders Once we installed the TIPM, we did the first soft reset (battery was connected). Then we got many dashboard lights and decided to go ahead and disconnect the battery for 24 hours (TIPM was installed, battery was disconnected), then we got dashboard lights but not as many, but each time we start the car and go somewhere, we do a soft reset (counting to 12 with key engaged but not turned over, then removing key and reinserting to start) in hopes that it will get the system 100% but it doesnt. I talked to Jeff via phone and he said to give it a couple days, so by Monday, if not back to normal, I will call to get replacement. Any ideas I could try?

[@billsmith9249]

@@offthebeatenpath5160 Did you get your problem resolved? Was your problem the TIPM after all? Also, when you're disconnecting the battery, were you keeping both cables tied together (over night?) Please update for the rest of us, thanks!

[@offthebeatenpath5160]

@@billsmith9249 The problem was the TIPM and it was 95% resolved (yes we did leave the cables tied together but not touching overnight) . I called them directly and I believe Mak answered, he instructed me to take it to the dealership and have them do a small procedure to it (sorry, cant remember the term) but it cost us $60 and took about 20 minutes. In doing this, our brake lights and back turn signals worked again as did the doors and such however the front blinkers do not work and rather than messing with it further, we decided that was acceptable. As long as people behind us can see our signals and brakes, we're good. On a side note, after we installed this TIPM and got everything working, @TIPM Rebuilders bought our old TIPM for $40 which helped with the overall expense of the repair. It's been over a year now and we are satisfied!

[@billsmith9249]

@@offthebeatenpath5160 thanks for sharing your outcome! My brother, an ASE Master tech, said that the VIN needs to be added to the TIPM. I wonder if that procedure was what your dealer had to do? Finally, what model vehicle was it? Was it a van? Thanks!

[@c2protect]

I have a 03 Dodge Dakota. After 300k miles, my wipers intermittently come on with the headlights. Can this be a process I should take on? Also, I just replaced my PCM, and still the same thing happens.

[@sanepsyko]

2011 chrysler town and country here, blinkers worked perfectly fine, but however my heated steering wheel now no longer works, goes on gor approx 3sec then shuts back off before I completed installation I made sure all the fuses were in their proper places and sizes... Ideas?

[@sanepsyko]

Another comment to add to that, saying if blinkers don't work switch 7-11 and the other one, what are you referring to there, fuses or cord connections because all the connection spots are taken and of different sizes (as you've said)

[@53tboy]

I have just purchased a new TIPM from Flagship One for a 2012 Dodge Journey . Any thoughts on Flagship one ?

[@tinoaldana6534]

I tried that and now it won't even start or crank, any idea how to fix that?

[@LamarwestTownhome]

I'm in same situation with 2010 dodge ram 1500 - after the overnight reset, nothing come on at all in the cab - no lights, chimes, nothing, and the engine won't make a sound when cranking - additionally the ignition wants to lock the key fob and not allow me to pull it out. really need some help - followed your video now up a creek. :(

[@tinoaldana6534]

@@LamarwestTownhome any updates on your problem with the ram? Mine is still parked sadly.

[@elirondon794]

Question: which of the plugs on the tipm is the one that powers the radiator fan? Having an intermittent problem with radiator fan not turning on and overheating due to that but when I hit the TIPM fans turn on or make attempt to turn on,so I guess it could be a lose connection on the plug that power up the fan under the TIPM I already replaced the radiator fan thinking that was the problem, 2015 wrangler jku 3.6 Btw great detail video

[@TIPMRebuilders]

Hello, I would not be too sure which plug controls the radiator fan off the top of my head ,but I believe you should be able to find what you are looking for here: connectors.dcctools.com/home.htm Once you enter your year and platform it will take you to a new page. In the search box type in the word "totally" and you will be able to see all the pin outs for each of the connectors that connect to the bottom of the TIPM. Please let us know if you have any questions. Have a good day!

[@deborahpotochney131]

I just bought an 02 Jeep Liberty last week from a private seller. It drove fine through test drive, and I drove it home about 15 miles and parked for the night. Next morning I start it and its a christmas tree on the dash, gauges don't work when I put on headlights and radio lights don't work, but music plays?? The odometer has a code "no bu5". I drove it to Auto Zone so they can scan it for any codes, but nothing came up. Not one single code? familiar with this issue? Im googling and seeing a ton of electrical issues with Jeeps and now I'm hoping I dont have a lemon on my hands. I'd appreciate any tips and advice that can help me. Thank you so much.....

[@deborahpotochney131]

Any advice, ??? I'm still having this issue. I hardly drive it because I don't know if it is going to give out and leave me stranded....thank you!

[@gerardogrillo5848]

@@deborahpotochney131 maybe you have a false contacts or corroded pins in some harness attached to your module...try desconecting all of them and reconnecting again

[@deborahpotochney131]

@@gerardogrillo5848 Thank you....thats the plan for tomorrow.

[@gerardogrillo5848]

@@deborahpotochney131 don't forget desconect first your battery before make any operation in your module

[@billsmith9249]

did you ever fix your problems? What were they (or was it?)

[@alexjohn774]

hello sir can you also do how to replace fuel pump relay for Dodge Ram 1500 thank you

[@moealmasri1745]

Hi Would this make my Horn work again on a Chrysler Sebring convertible 2009?? My horn suddenly stopped working and all blogs are talking about the Module Being non functional

[@MrHemi4spd]

Do you ship to Canada?

[@mm277hb]

GREAT video!! 🙏🙏 is there a reason you always tie the battery cables together? just to get them out of the way? or do they really need to be touching each other during this process?

[@TIPMRebuilders]

Yes. Tying the battery cables together dissipates any stored charge in the vehicle's capacitors. Just makes it safer to work on the electrical system. But when doing it as a standalone "hard reset" (instead of when just swapping the TIPM), it can further serve to clear the control computer (PCM aka ECU) and other modules of short term memory error codes that can be causing all kinds weird anomalies. Also, it is a good habit to keep cables from flopping around and accidentally coming in contact with a battery post.

[@HuhWhatHuhwhatHuh]

To drain any charge left in the engine. (Solenoids?)

[@kevinrobinson9020]

Do you use Die electric greese on the conections. Thanks, Kevin.

[@israelmendoza2421]

Not sure about him, but i do. Can't hurt. Full disclosure... I'm not a mechanic.

[@stephenmehallo3902]

@@israelmendoza2421 I would also use Dielectric grease as well for a positive metal-metal contacts

[@msantacruz430]

I reinstalled my tipm and I’m not getting power at all. Any tips?

[@TIPMRebuilders]

Hi, If there is no power whatsoever, that is usually due to a bad connection due to a loose fuse, wire or perhaps a ground somewhere. Are you able to confirm that all the fuses are pushed down as well as the connectors being snug and that the grounds are tightened properly? If you have any questions please do not hesitate to contact us at 8187985558.

[@KenH-dq1zd]

I have a 2011 Grand Caravan Crew needs a rebuilt tipm. Which tipm should I order?

[@TIPMRebuilders]

Hi, All 2011 Dodge Grand Caravans manufactured in the United States would be utilizing TIPM part number 04692335 which can be found here: tipmrebuilders.com/product-category/2011/dodge-2011/grand-caravan-dodge-2011/ If you have any further questions please do not hesitate to contact us at 818-798-5558. Have a good day!

[@julioblanco4176]

It is same the procedure to reset the TIPM in a 2011 dodge caravan.

[@fariskalf6667]

I have jeep liberty 2008, and l did your video... Stil the same problem... I need your advice. Many Thanks

[@TIPMRebuilders]

Hello Faris, Please feel free to give us a call or email us if you have time. Have a good day!

[@deahraj11]

HELPPPP i have 2011 town and country with a bypass for fuel pump. Can I reset the same Tipm because I'm broke?and its Christmas time. Just bought new batt and starter. Still getting on click.

[@TIPMRebuilders]

Hello, You should have no issue with performing the hard reset on that TIPM. However, with that bypass installed there should not really be any starting issues unless there is an issue with the actual TIPM board. Have you checked to ensure that all your grounds are properly tightened? Please feel free to give us a call if you have time ,so that we may better assist you.

[@haroldmitchell9606]

I got a replacement key for my 07 Nitro from the dealership and pay them to reprogram it say said it wasn't working because I needed a new tipm found my old key won't work for my vehicle because they wiped the system and erase the key now they want 1400 to replace the tipm if I put a rebuilt tipm in and hard reset it will my old key work again after I weight 12 seconds or will the new key work

[@TIPMRebuilders]

Hi Harold, I have not heard of such a scenario where a key was unable to be programmed due to a faulty TIPM. Also $1400 is a ridiculous amount to pay for something that takes 20 minutes or less to install. At the current moment are any keys working with your vehicle? If you would like to please feel free to give us a call and we will gladly answer your questions.

[@ocesmekanics3831]

How do I check the relay for the power door locks from the rear? They don't work on my 2008 dodge Nitro. I already fixed a broken wire that was cut and it seem to almost activate my door lock but it didn't. Please let me know

[@TIPMRebuilders]

Hello, In order to test or check your relays you could use a relay tester such as a relay buddy. These can be found at your local auto parts store. Feel free to contact us anytime with any questions. Have a good day!

[@pauloftarsus8145]

yes, but from what I understand, IF there is a corrosion, or water has entered then it may NOT need replaced, however you may have to pull it, clean the connections and put it back. Price? ZERO. If that does not work THEN yes you may have to buy a used one and replace it. Tip: Use dielectric grease.

[@andresgarcia2723]

Ok so i did a hard reset on my 2012 ram 2500 and the next morning my key didn't work .... it turns but the dashboard dont come on .. the outside lights do work and everything but the key

[@TIPMRebuilders]

Hi Andres, That is strange. Are you certain that the battery is properly tightened? I am unsure of what else could be causing this issue ,but in any case feel free to give us a call and we will be happy to help!

[@alfredogonzalez3223]

I just bought a Town and Country used 2010 and have had a lot of problems because i works perfectly during some time, but after sometime running it stars to fail and turn off the engine, right after that it is difficult to start it again and when it works fails few minutes seconds after, it seems that it happens once it warms up. it will work fine again few hours later. Would this condition disappear by doing the TIPM hard reset?

[@TIPMRebuilders]

Hello Alfredo, While the hard reset could help correct random electrical issues that vehicles can have from time to time, this issue that you are describing sounds like it could possibly be a classic case of a failing fuel pump relay which we deal with all the time. Please feel free to give us a call if you have time ,so we can go a little more in depth. Have a good day!

[@johnnykinsler9123]

Do you have to take your fuse box out to hard calibrate? Johnny Kinsler

[@TIPMRebuilders]

No, not for a Hard Reset. In fact, you should leave the fuse box still fully connected. The reason is that the box being fully connected completes all the circuits, allowing capacitors in all the electrical components in the vehicle to dissipate any stored charge. If you remove the fusebox, this would be impossible. So, leave it installed, and merely disconnect the two battery cables and tie them together (away from the battery posts) for the duration of the hard reset.

[@Jumbotron1978]

mal, my car has a red flashing dot on my dash and will not start. before it was my key fob not working and locks were unlocking its self. i has left side turn signal light not working and left rear back light not working as well. but with the flashing red dot on dash. does that mean it's a tipm problem ?

[@nerostark2242]

My Chrysler200 same thing