How To Remove & Install Your TIPM (Fuse Box) & Hard Reset - Full Step by Step Tutorial!

[@TIPMRebuilders]

It's amazing to see such positive comments! If you could take a moment to share your experience on our Facebook page, we would be incredibly grateful. This feedback helps us grow and ensures we continue to provide the best service possible. Thank you for choosing Mak’s! Here's the link: facebook.com/TIPMRebuilders/reviews 🌟

[@mattc6226]

I just wanted to say thank you! my girlfriend spent nearly 3k at dealer to get a new tipm installed before she moved 2k miles away. it didn't fix the problem and dealers here would not even look at it without 3 to 4 hours diagnostic at $295 an hour since they didn't originally diagnose it. they actually said drive it back to dealer. about 30 minutes after watching, I had it done. all the problems went away. no clicking from the box, the cd player is not trying to eject with keys out of ignition. I haven't replaced horn fuse yet because that woke us at 4am before I fixed it. I already liked and subscribed before commenting. thanks again.

[@alc1758]

I purchased a TIPM but was afraid to change it, after watching your video I was able to do the job in 30 minutes. Thank you very much.

[@albertwhitehead4849]

This saved me so much money and trouble!!!! THANK YOU!!!! I have a 2009 Dodge Ram1500. I thought I was going to be forced to take it to the dealer and pay thousands of dollars!!!! I followed the instructions in this video and it worked!!!! Running and operating perfectly!!!!!

[@fernandominkes6097]

Una pregunta no detiene que programar

[@z06badboy18]

Where did you ordered the tipm for your ram? Was new or used/ rebuilt??

[@z06badboy18]

Also what your ram symptoms were? My truck would not start battery dead and jumping it not work. I have no check engine light or anything how do you know it was your tipm? My fuel pump is not priming when i open the key!! Any help or guide ??

[@andrewwalz2787]

I can't thank you enough for this video. My 2008 Jeep Wrangler started acting up a few months ago. HVAC system would kick on and off spontaneously, passenger door wouldn't lock time to time, and both headlights completely stopped working at the same time. When switched on, they would flicker 4-5 times and would not turn on for a day or so. Followed your video, let the TIPM and battery sit overnight, reconnected everything and sure enough everything is working. Hope it stays like this!! Thank you so much, you saved me hundreds

[@jeep_jk_x7183]

Wen you unplugged the positive and negative did you put them together like he did it to drain the capacitors?

[@EatingHotIceCream]

So glad to have found this comment. Was driving on the interstate last night and all of a sudden my jeep went crazy! The heater was kicking on and off, the dash started flashing like crazy and then I lost my lights!!! Pulled over for a few minutes and was able to baby it home (headlights and dash were a light show though). I have more confidence about getting the TIPM now.

[@dman8089]

This video was a HUGE (I cannot overstate that enough) help. Thank you for posting. For those of you undertaking this task, I cannot stress enough that after releasing the cam device on each connector, make sure you push down on the see-saw release tab (I don't know what they are called) firmly so as not to break them (like I did on 2 of them).

[@TIPMRebuilders]

We are glad to have been able to help you out! If you happen to need anything else please do not hesitate to contact us. Have a good day!

[@victorhinojos5226]

Y Hvzz££

[@spencermaiers8322]

The brother of one of our mechanics had a 2007 Dodge Nitro that had a likely TIPM issue. Not only did I get personal, caring service over the telephone, but I ordered a TIPM after determining that it was likely the problem (and I was educated that it should be replaced on that year Nitro anyway, as it is one of the most notorious). The price at Mak's for the TIPM was less than the dealer with a shop discount and some adding pencil sharpening (for a brand new OEM part), even after overnight shipping via FexEx. The TIPM installed perfectly, required no dealer coding (some lights were on after install, which went away after a day of driving, just as was explained to me and I hopefully expected). The problem was solved and everyone involved on our end was extremely grateful. This is what good business is all about, personalized service and customer education. As a shop of professional mechanics from Seattle, we were completely delighted with our experience and look forward to doing business again if the need arises - we could not ask for any better.

[@billsmith9249]

just curious why your lights were on and how you didn't have to have it programmed ?

[@Sporty-gm7ss]

Thank you!! I have a 2008 Dodge Avenger that was having issues with the wipers going bezerk for years. More recently, it wouldn’t stay running but had weird electrical issues. It ended up being the TIPM. My local auto shop wasn’t sure if that was the issue, and said it would be at least 1400$ for this part and they might have to still do the PCM and another 1200$. Thanks to your video I bought a used tipm from a scrapyard for 27$ and had my car working in less than 10 minutes.

[@zachyzach32]

I have a 2010 Nitro and my wife was driving at night when the lights stop working. After researching it I found it's a faulty TIPM. The dealer wanted over $1100 to repair it. Luckily I found Mak. I got one of his TIPMs and my car works great now! I also live in LA si I was able to pick it up in like 20 min. Instalation was fast and easy. Thanks Mak!

[@scientist100]

How did you determine it was the TIPM? What sort of tests did you do to verify the failure?

[@RB-hg5uc]

For as many years as I've watched KZbin, don't remember ever liking or commenting on any video. Just ordered a TIPM from Mak on Friday, arrived, in Hawaii, by Monday early afternoon, and in my car by Tuesday. I don't even know if it works yet or if it will solve my problem, but the detailed instructions provided in the box by Mak, and this video, were awesome. I've broken countless clips off cars over the years b/c I never saw some hidden tab on it. Not this time, the one clip I had problems with I just needed to run back to my computer and rewatch how Mak describes removing it. No detail left out. If he were an Amazon storefront I'd give 5 stars. Excellent price, super reasonable return policy. This guy knows how businesses should be run.

[@makcabessa9178]

Thanks so much for the awesome review!! I really appreciate it :)

[@movalles3102]

rer

[@gds1211]

Absolutely the best mechanic's video I've ever seen. Your step by step instructions, including the fine points like even where to push a tab on a connector is outstanding.

[@TIPMRebuilders]

Hi, Appreciate the kind words! Glad we were able to help you out. If you have any questions feel free to contact us anytime. Have a good day!

[@israelmendoza2421]

Your vid is great. Very detailed as to which tabs and lock to move. Thank you so much. You spared me mutch time, scraped knuckles, and frustration.

[@gr8yt74]

Just ordered one for my car. Came across this video. By far the easiest video to follow. Great job!!!

[@esan0715]

Where did you get it from? This website doesn't seem to be working

[@gr8yt74]

@@esan0715 Maks TIPM Rebuilders

[@carlboehm3858]

Truly one of the best " how to " videos I have ever seen ...

[@TRICKYBYRD]

Damn, 5 years ago was different times lol

[@VASILEBENTA-ok7lk]

Amazing. Thx. Couldn’t start my car and I did exactly the same thing and started right the way. Finally a video with results

[@marjorieprintz2468]

thankyou this was very helpful my mom's 2013 dodge Avenger doesn't turn over but the dash board lights up Charged the battery overnight but still didn't start up Car was towed 5 or 6 months ago Maybe the towing was done wrong didn't have key to put it in neutral Going to take to auto shop for diagnostic

[@Marie-yl7id]

That’s so easy! Thank you so much you did a great job explaining everything & your Camera was in the right spots to easily see what your doing.🙏🏽

[@dporrasxtremeLS3]

Thank you for this Very Valuable Video! It takes All the Mystery out of this!

[@jeffwright4710]

This video was extremely helpful and informative. Looking at the TIPM at the beginning, it looked complicated. This video explains exactly how to do this project t

[@Hammbone511]

2008 Dodge ram hemi. Floor vents did not work, radio volume knob was random. Truck would not start. I did exactly what this video said. Waited over night to reinstall. Everything works now. Thank you so much!!

[@gerardogrillo5848]

What type of tipm you install? New, rebuilt ir used from a junkyard?

[@WhipzByBlue]

Had to come back and give my thanks for this video. Helped me out tremendously. 🙏🏾

[@anthonyhitchings1051]

A new maks tipm fixed my jeep liberty limp mode problem, i ordered it to be preprogrammed for my VIN

[@DenisDufour-h7y]

Any reprogramming need to be done afterwards ?

[@GLENNCARTY-e4k]

Thank you for posting the video i have been told that there may be corrosion on mine would that be from the TIPM on the the corrosion on the connections and if it is the connections how do you resolve that

[@marcohawkins2050]

Thanks for this video very good. From san andres island, colombia

[@denvermatt]

I wish there was a way to tip video makers on youtube. I would totally send you a tip. thank you so much . you got it right don't pay the "stealerShip"

[@TIPMRebuilders]

Helping out others is more than tip enough. We are glad to be of service!

[@crystalthomas8786]

I would too. My husband asked me to look up programming for his 2012 Ram 1500 after installing TIPM and there was none mentioned which makes this even easier to install. I really appreciate you!!!!

[@l.d.8310]

Excellent video kicks but from start to finish no lag time or wasted words...cheers!

[@eisebox]

Thank you for this! after I did this now my tire traction light came on would you know why?

[@smachzman]

I did this after I was sure I had an internal ECU problem on my 2008 GC diesel. The jeep ran for about 5 seconds after I did a DPF delete and hot tune on it and then it died and would only turn over. I had all kinds of strange codes showing up all of a sudden. Then I found this video! You saved me loads of money! I can't thank you enough. I just have to figure out why I have red throttle warning light on now and no radio anymore, but, she runs again! In limp mode, but, she runs! And that was half the battle thanks again! 😁

[@Ronyyy-qv8uq]

Thank you yeah I'm actually having my jeep towed from the dealer after watching your video I'm going to go home and order one do I need to order a brand new one for $900 or should I get a rebuilt one and I'm hoping they come with all new fuses and relays correct any suggestions should I get the new one for $900 I got a 2015 with 81,000 Mi on it I rolled it over in the snow it was it was it had a little bit of water in the lid and the front corner and then it sat at a storage place for 4 months so I ordered some deoxidizer so I can clean all my female connectors

[@dienekes4364]

Okay, this is kinda funny. I took my Dodge Journey to a mechanic who told me the TIPM was bad on my car. He told me he couldn't replace it because it requires programming by the dealership to get it working for my specific car. I went to the dealership and they quoted me $1375 for my TIPM, but it's on back order and they may not get one for a year, but at least they guy suggested that I hunt around online and see if I can get one myself. During my hunt, I discovered MAKS website, where you can order a rebuild of your existing TIPM. So then I decided to hunt around to see if I could find a video to show me how to R&R mine so I don't have to get a mechanic involved at all. I found this video, completely independent of the website. I didn't even realize it was the same company until the end of the video. You guys should definitely link to this KZbin video on your website. I'm pulling my TIPM and sending it to you TODAY to get it rebuilt. A rebuild (as of this post) only costs around $220, so I'm saving OVER A THOUSAND DOLLARS!!!! Thank you guys, SO SO SO much!!!

[@abuasaad3262]

Hi my dear friend Mak I would like to thank you for doing these videos. I watched some of them I did the same steps you did. My question is how often do I do that remove and install tipm to my car dodge grand caravan and if one switches of the doors or liftgate doesn't work what can I do?

[@hailea3840]

I have question after remove bad old one ,get from others good tipm after installed ,Do you need to program it at dealer ? My car 2013 Dodge Grand Carvan base

[@chrisleeper3579]

Hi Matt, Awesome video, I have a 2013 Ram 3500, I have dual batteries would I unhook both of them and tie up or only the one closest to the TIPM. I thought it would be both but wanted to make sure.

[@ChrisJohnson-eo1hq]

Did you have to program the new one ?

[@ozzzyd922]

I really appreciate you taking the time to make this video brother. You da man!🤙

[@Larrys1977]

One question, though. I have a 2010 dodge journey with the typical problem of the battery dying. When I replace the tipm, don't I still have to take it to the dealer to have it programmed ?

[@2gunsnj364]

Tipm came in fast and on time. Thanks

[@TIPMRebuilders]

You are very welcome. We are glad to have been able to help you out!

[@adamsnider1528]

Great video, I just hope someone mentioned that if you did this on a diesel (dual battery) make sure you remove the leads on both batteries before you try putting the red and black together.

[@davidsine4390]

Do you know if you can safety short the battery leads together in order to replace the TIPM on a deleted truck without removing the software? Thanks

[@adamsnider1528]

@@davidsine4390 not sure what delete software you've got but it should stay loaded. Just rock a 5.9 like me and don't worry about deletes 😅

[@davidsine4390]

@@adamsnider1528 I wish. It's an 08.

[@barryhall1222]

On a 05 Jeep grand cherokee when you change this does the dealer have to reprogram vechile

[@atakbill3288]

Will you list the issues that a hard reset will possibly solve? Will be nice to know first so we can make a decision based on our particular issue. Thanks.

[@TPLUSROB]

Yeah what happens ?

[@mblake0420]

It drains the capacitors on the circuit boards so you don't zap something when repairing the board

[@ronkpaws1]

When you connected the Poz. cable the horn started blowing. My horn blows randomly on my jeep. Do you think my tipm is bad?

[@prestonpeters6858]

So did you swap the TIPM or just drain the capacitors, disconnect everything and reinstall to solve the issue on this particular Jeep? My wife’s 2017 JK has been acting up and I’m trying to pin point the issue for as little cost as possible. Radio goes in and out and the dash goes crazy.

[@jkxelor1295]

Man I appreciate you posting this Great help no bs right to the work

[@Nicardipine]

Having trouble with my Sebring. I’ve tried two different tipm units (used) and can’t get my wipers to function properly. I didn’t however (either) time zip tie my battery cables together. If I just did that now and reconnected the battery a few hours later do you think that will fix the issue perhaps?

[@wkelley2544]

VIA email, I asked a support tech at Dorman if all relays soldiered into the board are replaced with new relays on their re-manufactured TIPMs. The response was 'the relays are checked for function and replaced if necessary, Capacitors are tested and solder replaced if necessary, these are also plug n play units and do not require dealer programming'. So the way I interpret this for my 2011 Ram 1500 is with the re-manufactured TIPM I am getting used relays and capacitors up to 9 years old on the re-manufactured unit if these happen to pass a function test. It seems the relays soldiered to the board are the 'weak links' in the OEM TIPM. Is there a company that provides all new relays soldiered on the board in a re-manufactured TIPM?

[@patriot9274]

Doing this would fix the horn blowing randomly issue?

[@YinzerInFlorida]

This was a great video~how can I know for sure it is the TIPM tho? We thought is was the blower motor because AC stopped. Headlights flash occasionally doors won’t lock with key fob and Jeep didn’t start the other day but then it did. Whacky things going on so assume it maybe TIPM. How can I check for sure?

[@YinzerInFlorida]

Also we did test a new blower motor and AC still did not start.

[@747-k3j]

If I purchase a new TIPM will it need to be reprogrammed to the vehicle OR would I be better off just getting my old one repaired? It’s an 08 Sahara unlimited. Also, how long will the repair or rebuild take?

[@EthanForToday]

Can a bad tipm cause the radio and instrument cluster gauges to malfunction? I just replaced my battery and alternator, and everything in my 2017 Jeep wrangler works perfectly fine besides my dash gauges and radio! And they don’t malfunction all the time, it’s bad as of late but for the most part it can go weeks without malfunctioning and then go weeks straight with malfunctioning

[@FB-mh9kk]

Hey!!!! So once you install a NEW tipm, won’t you have to ‘reprogram’ it to the actual vehicle?? Or like, ‘register’ it somehow?? Or it will be automatically recognize the new one as good to go????

[@TIPMRebuilders]

There is no need for reprogramming these TIPMs. All you have to do is the 12 second reset done as so: 1. Get in your vehicle. 2. Put the key in the ignition. 3. Set it to run mode(just short of cranking the vehicle) for 12 seconds ( gotta be fairly precise with this so have a stopwatch on hand) 4. Turn off the vehicle. 5. Turn it on until it cranks and starts and you're ready to go This will input your VIN into the TIPM. Let us know if you have any more questions. Have a good day!

[@wstreetsart942]

@@TIPMRebuilders how do you do this with keyless push to start? (2012 Dodge Journey)

[@ginocrisano4804]

Can this cause misfire in cylinder 5 I’m getting that and all lights coming on and off on dash

[@scotttrimble4667]

I just got back from the dealer who fixed everything else first.. then lastly said I needed to get the TIPM from them for $675. + programming/install of it. And it would be on back order besides. :( There are parts stores out there who will sell one with your VIN programmed by them into it (which is necessary for it to work in your vehicle) .. prolly go this route .. hope it works.

[@kleenmaint]

Thanks Mak. If I don't have a scanner how can I tell if it is the ECU or TIPM that is at fault.

[@kleenmaint]

where are you at@TIPMRebuildersKevin

[@hcorley3]

Job well done, thank you for the information.😊

[@TRICKYBYRD]

You say leave the battery connected like that overnight but do you mean before you even touch it or just from the same time you did it and just let it go because art and talking about discharging capacitors that are on the tipm?

[@shootforsoldphotography3610]

Mac, thank you so much for this video amigo! Super helpful! I am so pissed at the POS Chrysler that we bought that I will promise never to buy on again!!! Ever!!! The video was stable, constructive and super well organized! I found a TIPM in a local salvage yard. But I already have a feeling that I should have purchased one from you sir! Thank you again! Americans helping Americans! Appreciate your wisdom!!!

[@makcabessa9178]

Thanks for the positive comments! I hope the salvage TIPM works out OK. Don't hesitate to call us if we can help you get it installed or if it doesn't take right away. We''ll help you out

[@chrisgomez4132]

2014 Ram 2500 tradesman 6.7 cummins, where is the relay for ac compressor? I cannot find the info anywhere. I found the fuse but not the relay. There is no additional fusebox under the steering wheel. or anywhere else I've looked. Please help

[@bryanbridgforth6651]

Great video man! I would've definitely broken those tabs trying to get them off. Thanks for taking the time

[@TIPMRebuilders]

We're always happy to help Bryan!

[@vendere-casa-al-circeo]

Salve, ma dopo aver sostituito TIPM (scatola dei fusibili) con una nuova, occorre programmarla per la propria jeep o rifunziona tutto in automatico? La chiusura automatica con il telecomando rifunziona o va riprogrammato? Grazie

[@LouisMiramontes]

Do I have to program the new TIPM?

[@Angrykat420]

Hi mak your video was awesome . Dodge wants 1200 to replace my girls tipm in her 2011 Dodge Ram 1500. But found you're website and your video. Looks supper simple to do. THANK YOU! How much for a tipm for a Dodge Ram 1500? I'm in the Simi Valley so I'm sure I can drive to you and just do this in a parking lot. Thanks!

[@ivanbarrio1]

Hello! Thank you very much for sharing the video. I make a query. I have a Dodge Journey 2.7 v6 and it will burn the TIPM module and I want to replace it with another taken from another journey. Does the TIPM modile need programming? From already thank you very much.

[@djillwillsix5054]

Hello just watched your video on the tipm ? Can a tipm make a alternator go bad?

[@billyray6913]

What do you think about this solving my limp mode problem on my 2008 jeep wrangler? It randomly goes into limp mode.....

[@TIPMRebuilders]

Hi Billy, A TIPM can cause your vehicle to kick itself into limp mode. I would recommend trying a hard reset ,but with a limp mode issue it may be best to swap the TIPM as it could be a faulty driver within the TIPM causing that issue. Are you experiencing anything else besides a limp mode issue? Please let us know or feel free to call us at 818-798-5558.

[@binarybox.binarybox]

Just been looking at my TIPM so thanks for showing all the tabs on the plugs. They do come out very easily. I need one now to swap over but not many spares in UK.

[@EyeintheSky999]

Would it be a good idea to put dielectric grease on the contacts before putting the new one in??

[@TIPMRebuilders]

Hi Rob, It is best to actually not put any grease on the contacts as it can actually cause more harm than good. Please let us know if you have any more questions. Have a good day!

[@mikegambill1387]

If I am going to just unplug and reseat all the plugs on the unit to be sure of a good connection, do I have to connect the two battery cables and wait for several hours? Thanks.

[@harrypownall9102]

For ANY intermittent electrical issues, it is always a good idea to remove and (properly) inspect the terminal connections, both for fitment and cleanliness/corrosion. There are tools made specifically for checking terminal tension, visual inspection is not always the most accurate.

[@reys2631]

Do you have to take it to the dealership to reprogram the TIPM ? I am replacing my TIPM its not refurbished but pulled from another challenger

[@abrahamcastro6709]

Good video .. question when I change the fuse box need be programed or something??

[@TIPMRebuilders]

Hey Abraham, no programming needed. All you have to do is a simple soft reset where you put the key into run mode for about 1 minute and then turn the vehicle off. Take the key out and then put the key in to start it up and you will be good to go!

[@Turk_2023]

Thank you for doing close ups on the tabs. You can tell most people edit out that they were fiddling with them for 20 minutes

[@binkydamauler]

silicone grease on the sockets will lubricate the spades and protect from corrosion and/or oxidation

[@yaya-fk6rq]

My key fob isn't working after I replaced Tipm. I got the timp from another Chrysler town and country. Everything works fine but My key fob buttons. Any help is appreciated

[@bradbrinegar1419]

Hey man I'm facing a no crank no start situation on an 09 wrangler. With the key in the on position or even start position the fuel pump isn't powering on. I've checked all grounds and replaced the ignition module. I'm at wits end with this thing. Does this sound like a tipm problem. I just don't want to keep throwing unnecessary $ at this thing.

[@car_chemistry5236]

Hi brother Replace this fuse box needs sny program , because when I changed the car didn’t start

[@BjBnet]

The doors on my 08 KK don't always lock, especially if it's warm out. The door lock buttons in the door panels and the remote don't work. The horn will sound and the lights will flash but the doors won't lock. I'm going to try this to see if it might just be a connection seeing as if only happens when it's warm. Thanks for the video, helps with my confidence to pull the TIPM.

[@mikeholbert1686]

I am experiencing the same with my 08' now. Did this help or did you find a solution?

[@surfer103]

This is great to know in order to save money. Thank you. Question: why not disconnect the capacitors out from the TIPM instead of taking the entire box out?

[@Greg-xt2pn]

I've found my problem after buy a NEW tipm box for 1,000$ I discovered upon taking out the old box ..that there is already a bypass on it !!!! The part where the fuel relay goes is is damaged and burnt terribly!!!! I want to remove the bypass and put the wires back into the harnesses to insert into the NEW TIMP BOX

[@danielodonnell8998]

perform a capacitive discharge to reset all the sensors?

[@monicac.6941]

Hi, thanks for the video. If you’re still checking questions, wondering if it’s necessary to replace the whole fuse block if it’s loose. Was having electrical trouble with my 2017 gmc terrain, the positive terminal (bolt) used to boost the battery was loose and had melted the plastic of the red cap. The mechanic removed the loose bolt, cleaned it, the tightened it back in place. But said that the whole fuse block was loose which may have caused the bolt to come loose. He said it shouldn’t move, and if it was his car he would replace it. Cost to be around $200-$300. Is there no after market bracket I could use to secure it? Thanks.

[@marcos22571]

My 2005 Titan is locking and unlocking by itself and the upper lights from the temperature bar keep flickering on and off. Thanx! What does T.I.P.M stand for?

[@TIPMRebuilders]

Hi, TIPM stands for Totally Integrated Power Module. These units are utilized in Chrysler, Dodge, Jeep and RAM vehicles starting as early as 2002 and some current gen vehicles still use them to this day.

[@joedimauro1065]

Do they only go where they can go ? About to do this

[@RevMatchTrackDays]

Will this get rid of the “engine will not restart in x miles” message after an eco diesel repair? Thanks in advance.

[@oliverhernandez9781]

Can you help me.. I just need a complete diagram of a 2006 pt cruiser tipm P56049719AI.. color code.. all pin out labels and functions.. I can't find one online.

[@karenbaez4756]

Does this work on any car? I have a 2006 pt cruiser and I was told it had bad computer and needs to be reprogrammed. Any thoughts? It starts then dies after a few mins and if I don't touch it at all for few days it stays on longer but eventually dies.

[@cmackinahemi300c]

My foglights are malfunctioning will a hard rest on my tipm solve the issue and will I need a new one I have a 2015 Chrysler 200C

[@TIPMRebuilders]

Hi, To be honest probably not ,but it does not hurt to give it a try. Also what is happening with your fog lights exactly? Are they staying on or are they flashing or just refusing to come on? Please feel free to reach us at 818-798-5558 with any TIPM related questions that you may have. Have a good day!

[@wilp6751]

Question could this possibly be what's wrong with my 2011 chrysler 200s it stalls while driving no warning plus my horns were goin off until I unhooked my horns but I can wiggle the fusebox and sometimes it will stall?

[@TIPMRebuilders]

Hi Wil, It's definitely a possibility that it could be your vehicles TIPM. However, if you are wiggling the fuse box then we would recommend checking the connectors first and foremost to make sure that they are not excessively worn. But, it could also be a driver within the TIPM that may have a fault. In any case please feel free to reach out to us at 818-798-5558 and we will be happy to answer any of your questions!

[@callerid6130]

So you put the same tipm on that you removed? Or they were 2 different tipm? My 04 Durango SLT was broken into, and ignition, skim , part of the ignition housing, and a few ignition switch wires were damaged . But there’s a back order on the skim till September. Really can’t wait that long, so If I replace the pcm , tipm , skim, and ignition with another Durango’s and I also get the key to that system wil my vehicle start?

[@TIPMRebuilders]

Hi David, I believe it is the same TIPM for demonstration purposes. I believe with the PCM you would have to get that unit flashed ,but with the TIPM there should be no need to. You should be able to just install that unit and do a 12 second reset and it should work just fine for your vehicle. If you have any questions please feel free to contact us anytime. Have a good day!

[@Bassclefderreck]

How do we know if this will help? How do we diagnose if this is the problem

[@troyphillips6375]

I have a 2016 Jeep wrangler and power windows are not working i can’t get them to go down all four doors will this solve my problem the shop said TIPM was bad and cost would be 1900 part is 1500 before I spend that does this control the power windows

[@Sagitario17]

does the TIPM needs re-program for a compass 2007?

[@DKE0606]

Is your horn not working? Cause that's the problem I have with mine it's a 07 as well

[@eduardomenendez8654]

Is it the same for a ram??

[@rubentorres2028]

Thank you!!!!! This is a really good help!!! Very good explaining 👌

[@MrJifford]

Thanks for this video,man people in dealership service are too greedy of money even minor issue of the car they ask over price their work which like a fraud u cant trust them all

[@harrypownall9102]

What wasn’t addressed in this video, and the maker fails to mention, is what the actual failure was and WHY it was being replaced. I’ve seen do it yourselfers spend hundreds if not thousands, in wasted incorrect ‘diagnosis’ (guesswork or parts cannon), before actually fixing the correct cause of whatever issue(s) they were having. Yes, the physical aspects of changing this particular TIPM is easy, but tell me, what was the problem and was it fixed after replacing it?

[@MrJifford]

@@harrypownall9102 i agree but if something wrong with your car u can notice it in dashboard lights comes out and u can decide to undergo diagnostic by then u can determine the issue of your car that u need to replace the whole fuse box

[@buckster2575]

What years are the same as the 07 dodge nitro.

[@YouTubeStudio101]

Great video, excellent visuals! Thank you.

[@alexanderkucher2140]

Thank you very much for this great video!!!!!!!

[@Ridges0088]

Do you take orders to Canada?

[@kelvinrodgers3350]

Do the TIPM have to be reprogram after you install the new one.

[@TIPMRebuilders]

We are the only company other than Mopar that factory resets our TIPMs therefore there is no programming/flashing/configuring needed with these TIPMs, that's just something the dealer tells you in order to get you to spend more money. It is mostly plug n play ,but you have to do something called a 12 second reset. So, once the TIPM is in the vehicle and everything is set and ready to go you want to do this process: 1. Get in your vehicle. 2. Put the key in the ignition. 3. Set it to run mode(just short of cranking the vehicle) for 12 seconds ( gotta be fairly precise with this so have a stopwatch on hand) 4. Turn off the vehicle. 5. Turn it on until it cranks and starts and you're ready to go It's a very simple process that can be done quickly. If there are any persistent dash lights even after a couple days of driving, then you can move onto a hard reset. Also, a simple process, but you don't need to worry because we ship all of our TIPMs with detailed instructions as well as a QR code that will take you to our KZbin channel where you can watch a lot of useful tutorials of how to uninstall/ install the TIPM as well as the reset process. Should only take about 10-15 minutes to uninstall and reinstall the TIPM. In order to do a hard reset: 1. Disconnect negative battery cable 2. Disconnect positive battery cable 3. Using a zip tie or a string touch the two metal loops together and tie them together 4. Let sit for at least 10+ hours 5. Reconnect positive 6. Reconnect negative 98% of the time that is all you need to do. There are some rare cases where you need to get the TIPM reconfigured at the dealer, but those are rare. Please let me know if you have any more questions. Have a good day!

[@kodydusty]

I have a 2013 Dodge Avenger SXT. The windshield wipers will sometimes pause briefly in the middle of the window. Also the left turn signal will flash rapidly but only when the headlights are on, otherwise it works fine. Can these issues be related to a bad TIPM?

[@TIPMRebuilders]

Hi Kody, That does sound as though it could be a TIPM related issue. There is a driver within the TIPM that controls the wiper function and perhaps that driver may have a fault casing them to get stuck in such a position. These drivers do also control lighting such as headlights, brake lights, turn signals... you name it. So, both of your issues could be originating from the TIPM. Please feel free to reach out to our team at 818-798-5558 and we can see if a TIPM replacement is the right way to go. Have a good day!

[@HPNO300]

Anyone happen to know if this will reset any vehicles with custom tunes on them? I want replace the fuse box/TIPM on my Jeep SRT but questioning whether this will reset my custom tune.