UPDATED Installation Guide for RISE Kit on PS5 BDM 030 / 040 Controller - eXtremeRate

[@reno2898]

I came to write this, After Installing the controller on BDM-030 ( This works for BDM 040 as well) DISCLAIMER: YOU DO NOT NEED TO SODER IF YOU DON'T WANT TO ROUTE TOUCHPAD OR R3 and L3 Basically, in this video if you're not trying to route the touchpad to the paddles or R3 and L3, then skip from 4:02 to 9:31 0-4:02 (from 0-4:02 it shows you how to take apart the controller to reach the areas we need to get to) 4:02-9:31 ( shows you how to solder and what's needed to route the touchpad to paddles) (THIS IS IF YOU WANT TO ROUTE TOUCHPAD AND R3 and L3) 9:31-12:50( is showing you the process of putting everything back together as well as adding the necessary strip for power to the paddles whether plastic or metal) 12:57-13:27 (shows you the requirements if you want to route the l3 and r3 buttons, this requires soldering once again) ( if you do not care about those skip straight to the plastic or metal paddles installation part) 13:30-19:32 ( this is the plastic paddles installation) 19:32-25:35( this is the metal paddles installation) 25:37-27:17( This is the remapping tutorial) (how to test if it's working properly, what to look for if it's not, if working properly how to map buttons to paddles) If you follow all of these steps correctly and precisely you will be able to get on your first try, remember to make sure everything is plugged in PROPERLY, I'm not an expert but figured this might help some of you out. Thanks!

[@reno2898]

@ExtremeRate please pin this I hope to help others thx !

[@Bengals_edits]

thank you so much bro i want to give you a big smooch

[@ExtremeRate]

@@reno2898 Thank you for the tips, we will put the detailed timestamps into the video showing different sections.

[@zekuyt7704]

Hi what buttons can u remap without soldering then ?

[@paradise9801]

@zekuyt7704all except l3,r3 and touchpad

[@chuckrichardson83]

This is the way I did it with the original remap kit because I didn't understand why they would have you a fix it to the board with 3M tape which will eventually fall off and the connection wouldn't stay so it was common sense to attach it to the pegs directly versus sticking it to the board. I'm glad that this is an updated video for those that don't think outside of the box or the original directions as I'm sure this will help many others

[@HarryTheDon10]

We want clicky triggers for bdm-040!!!!

[@YoutubeAccount-qq7zj]

THIS

[@pedrocamacho4229]

PLEASE

[@Problematicproductions11]

They told me they were working on it

[@YoutubeAccount-qq7zj]

@@Problematicproductions11 yea they said that month ago as well.

[@Blade-Rave]

Half a month ago they said it’s in testing but needed roughly a month’s time to ensure it works

[@husselkhatib]

Took me 2 hours to build. Didn't need to soder for the main keys (X and O). Controller works and feels great. Thanks!

[@Bloiki]

does it have auto clicker and macro ?????

[@Real-talk-only.]

@Bloiki someones trying to cheat

[@Bloiki]

@Real-talk-only. its not realy cheating

[@ScrNocks]

For all the people struggling keep trying , this shit has to be so perfect it seems lmao took me fking 7 hours to have it be funtional

[@douthinkimbetter]

Great tutorial, took me about an hour and a half and I went VERY slow.

[@BilalIjaz644]

Guys if the red light isnt turning at all, it could be the contacts. It was for me and you have to use one of the pads in the the other video the first one (not the updated one) to heighten the contacts so they can connect to the electronics of the kit. if anyone doesnt understand lmk!

[@Michael-n2s9r]

This kit is a mess for me i have this kit but it didn't have a qr code so i search and the only video i found was k1k2k3k4 not the one i have so I fallow it installed it now the light does turn on but very light not dark like in the video i only solder the pad how ever i press the settings button it blinks 1 and stays on than i give it a comand k1 triangle and it blinks a few blinks but it doesn't work on k1

[@Michael-n2s9r]

You know what never mind it does work my problen is I have give it a comand then turn the controller off and it works when turn on ?? Is it supposed to work like this ??

[@bryanquintanilla2468]

Bro I need help

[@bryanquintanilla2468]

Pls

[@BilalIjaz644]

@@bryanquintanilla2468 what do u need help with

[@AshtonDwyer]

I ordered the rise kit for the bdm 40 and 50 and got sent the bdm 10 and 20 one

[@zBxder]

Thanks ur video is way better than the original I did it in 15 mins

[@MoussaBallaBakayoko-qj9hu]

Thank you very much! The video is well done and the explanation is very clear.

[@joshua199628]

Thank you for the great instructions!

[@bertanyanik4675]

I dont get any red light and the buttons won't work when I start a game, what did I do wrong?

[@ziriy7862]

Have the same issue sometime it works and sometime it wont

[@ziriy7862]

Try to unplug everything plug in back maybe it works then constantly

[@ziriy7862]

Got bdm 040 btw

[@Bvsh19xx]

Mine doesn’t work either no red light for both my controllers model 040 and 050

[@KaineAlpha]

my L3 and R3 aren't mapping, I get the LEDs but the button doesnt work

[@BilalIjaz644]

Please update the updated video with how to heighten the contacts with the pad Thank you! @ExtremeRate

[@2012FREEDAWEED]

I'm sure the metal rods in my kit are slightly too small both paddles are wobbling a lot and just feel flimsy

[@lmac5412]

Do you know why now that when I installed the led kit in my controller the trigger doesn't work??

[@NowzerBeats]

omg finally after 2h don't give up guys the lights didn't show on for me, because I plugged the big orange connector in the wrong way double check everything you'll find

[@ExtremeRate]

Glad you fixed it! Now enjoy your pro controller😁

[@BilalIjaz644]

the light wont come on and the contacts for r1 r2 l1 l2 are aligned pretty sure, i checked 2wice

[@YoutubeAccount-qq7zj]

I have customers complaining the paddles intermittent not working. And I found out when pressing L3 the paddles would stop working and when releasing they work fine again. Is this the reason you use the 4 plastic corner pieces instead of the EVA tape?

[@catpersonality66]

Yes to prevent the false signal conduction on the FPC pressed by other buttons in a compact space

[@expert6009]

I did everything like in the video but the led indicator did not light up at all, why?

[@stepxhia8883]

Guys my light dont work how can i solve ?

[@JoGroove]

My red light turns on but my remapped buttons don’t work?? The paddles click fine but i doesn’t get the remapping. Any help??

[@daryelhernandez9472]

9:55 I’m working on mine and the cable that came with it isn’t big enough

[@ExtremeRate]

Please first check your controller BDM model, and check if the version of the kit you got is compatible with your controller. If you need any support, please contact us by email - [e-mail] extremerate.com/blogs/replacement-guides/how-to-check-your-ps5-controller-bdm-model

[@sebthatguy]

I don’t have a solderer how do I do this

[@p1ay_atx]

Mine didn’t come with none of this

[@2012FREEDAWEED]

Are the paddles meant to be slightly loose or have I done something wrong?

[@tomlee8795]

wish you guys would make a eXtremeRate PS5 DECADE Tournament Controller DTC Upgrade Kit. got the rise 2 kit for the ps5 controller and its so uncomfortable the way the back button are aligned.....

[@ExtremeRate]

Thanks for your suggestion, we are working on something similar with the PS4 DTC kit, but it takes time, please stay tuned!

[@SlimPalaceclips]

I can’t find the bdm-040 version on Amazon. Will the bdm-030 kit fit my bdm-040 controller?

[@babayaga2632]

The Bdm 030 and Bdm 040 come together.

[@dannykzo]

@@babayaga2632i trust you, i got this kit for my 040 version have you tried using the 030 to the 040 controllers urself ?

[@Michael-n2s9r]

The k1 k2 button do not work when i give the comand k1 plus triangle or k2 plus R2 when on i have to turn off then back on and it workss is it supposed to function like this ???

[@Hmz_elk]

I did this and now my controller does not vibrate anymore. It makes a sound as if it want to vibrate but it is stuck. Anyonye found a fix?

[@bryanquintanilla2468]

I can’t get my controller to turn on the right light some help pls I’ll pay yall if yall get it to work asap

[@rickyyym]

Any plans to release this in silver to match the silver ps5 controller?

[@andresalonso944]

When I try to press down on the paddles it doesn’t click or press the button at all no matter how many times I try to

[@ExtremeRate]

Have you exit the setting mode?

[@bub2slimeyy]

@@ExtremeRatemines does the same for k3 and k4 how do i fix?

[@nekron1888]

How to fix if lights doesn’t show

[@Kerbybtw]

How do I allow one of my paddles to connect to my circle button

[@alexoconnor1666]

bro it did not say you have to solder it that doesn’t come with the kit what else can i do

[@jaydenlai2861]

Fr bro they should say u had to do that it’s so stupid

[@Officer_Mills]

You only have to solder if you're planning to remap the TOUCHPAD. If you're just using the paddles, there is no soldering.

[@reno2898]

@@Officer_Mills Hey what does this mean necessarily just worry about connecting the batter and what not

[@zekuyt7704]

@@Officer_Millswhat about the thumb sticks do you have to solder for that as well

[@safebass5170]

Hello, is welding really mandatory?

[@VeelVuur209]

Can this be installed together with whole clicky set?

[@gunsmokeghost1490]

Can I re map a button and b button to the back paddles without soldering??

[@samirarastegar1330]

What is the solder

[@CatabrigaTh1]

Can I put the WHOLE Clicky kit together with the RISE kit? Or can I not put the two together?

[@ExtremeRate]

Hi, you can put both onto a controller, first install the clicky kit and then the RISE.

[@andrewmena5220]

How do I remove the metal case on kit to access the mother board again my K1 is too loose and wobbly

[@2012FREEDAWEED]

Same for me I managed to get the case off but i have no idea how to stop it from wobbling it just doesn't seem right to me did you fix yours?

[@Josh08-]

Does this work with BDM 050?

[@Yeawedodat]

I ordered the wrong version is there a way I can get another or do I have to pay

[@dannykzo]

you will have to contact customer service, and send them back the one you received..

[@たろぷぷうたろ]

Updates are too slow. I reported that the touchpad version had changed in last October.

[@iKarlito]

Do you have a solution for the newer touchpad soldering point? I don’t know where to solder edit: Found the solution on reddit

[@UnknownJayz]

idk why this shit is so hard bro

[@Sumoki_]

DO NOT BUY THIS PRODUCT. I literally got done with it all but the last peice you put on which is the last cover for the motherboard it BREAKS THE THING THAT CLIPS THE RIBBON IN PLACE now the whole thing is trash it doesn’t work anymore it made me break my whole control as well

[@ErkanAslan-v7i]

Lan du pic wie lange geht das

[@jaydencoolkid5472]

I broke my controller 😭

[@legitcrack6438]

£20 too expensive

[@Kritlon]

Then buy the ps5 edge controller 👍

[@jackdudley6518]

Does this work with bdm-050?