*UPDATED* | MALM 6 Drawer Dresser IKEA Tutorial

In this tutorial, I'll be showing you step by step on how to assemble the Malm 6 drawer dresser from IKEA. I have made this IKEA Malm 6 drawer dresser tutorial again to give you guys the updated version of this assembly since a few steps have changed. This IKEA Malm dresser could be a bit tricky to build so if you need some help, this video will guide you along with the instructions.
Like and subscribe if you found this IKEA tutorial helpful! Thanks for your support.
Wall hardware demo: • Tutorial | Malm 6 Draw...
Time stamp: 12:18

[@umashen]

This is so helpful, I don’t even need to look on the instructions that IKEA offered. This video makes everything so easy. I built it by myself around 2.5 hours only!

[@jimbryant3750]

Thank you for producing this video, it made the assembly of the MALM so much easier.

[@sofiyah5886]

You’re a lifesaver!!! Took me 6 hours to put it together myself but I did it lmao

[@RicardoRamirez-hy2de]

Facts😂

[@mandevilleQc]

Thank you so much man you are a life savior, Ikea's manual is shit and hard to understand while you are just making it so simple for us !! They should do a QR code with a video on each product they sell haha 🎉

[@ayodejiadetunji1208]

This is a very detailed and straight to the point guide. I used it to assemble my IKEA drawer dresser and it came out perfect! Thank you so much.

[@cdub5072]

Super fun putting it together with a person who thinks they know it all.

[@TheAdawg1994]

this was my first ikea build, i dont know what i would do without you bro 🙌

[@JasonKim-ze3tj]

underrated content

[@saronnnn22]

Stuff like this doesn’t seem useful until u need it

[@eduardopollo2836]

Thank you sooo much! So easy to follow. I was able to fix my mistakes bc of this video (drawers weren’t closing fully).

[@user-xs6tw7zc1q]

Lifesaver ! If it wasn’t for this video , I wouldn’t be able to assemble this drawer. Thank you !

[@Franchyze923]

thank you for making this less painful!

[@VikasKumar-fp5zn]

Great video. The instruction booklet that came with the dresser was useful, but this video clarified the steps. Thanks and keep up the good work!

[@RicardoRamirez-hy2de]

Thanks bro !! Was a pain but your vid helped so so much🔥👍🏼

[@jenniataylor5757]

Thank you SO much for this!!

[@breannafields6198]

My drawer won’t go Inside it’s like it’s something blocking it from fully going in all the way and idk why 😢

[@kanju_adam]

Check that you placed the railings in the right direction.. it happened to me.. I had placed one that should have been on the left on the right side

[@VictoriaKuzak]

SO helpful, thank you.

[@ChristianGarcia-jv6cv]

Very detailed and helpful! Thank you

[@camilliesmilez]

Thanks so much for the video! It made putting together the dresser so much easier! Super appreciate this video.

[@emilabd2616]

Thank you sir, this helped a lot

[@mynameistravisscott]

Your the best KZbinr in the world

[@enriquetiburcio5419]

Thank you!!!

[@user-cx5ne7zl4q]

Appreciate this video was a life saver

[@neetzo6421]

Amazing tutorial!!! Thank you!!!

[@blah3times]

Very helpful. Thanks!!!!

[@yengbamba9022]

Amazing thanks for the help bro

[@FelipeGarcia-rk5ph]

Thank you so much. Very helpful.

[@katherinaoconnor3006]

Life saviour! Your tutorial made set up such a breeze.

[@shotowaifuu8784]

This helped sooooo much

[@dsslogistics1277]

Thank you 🙏

[@Forevercamy]

Followed all the steps and made sureall the CR and CL, and DR and DL rails were in the right places but when I try placing drawers on the other side they hit up against the other drawers already placed in the middle. Unable to fully close one drawer. Any help is appreciated 😵‍💫

[@marcusroberts913]

This video was so clutch.. Thank you, it made things so much easier. I had no issues 🙌🏾

[@briannaramos2216]

Anyone else missing a top panel ?

[@Cons3]

Nice, my box is missing the CR drawer slides. I guess I’ll be back!

[@astronomicalant]

Excellent video tutorial, and extremely easy to follow. My only request would be to show us the exact amount of spacing for the tiny screws on the back of the board but other than that perfect video!

[@cheesycheetah76]

None of the whole for my CR drawer sliders match up. What’s gone wrong here

[@deadboys007]

The drawers lock and get stuck it’s a nightmare that black piece clicks and locks can I just remove it

[@sofiyah5886]

It locks to prevent the dresser tipping over.. so it’ll only allow 1 drawer open at a time

[@Terry-nr6gi]

The locking mechanism doesn’t slide for me

[@1boy2moms3pets]

Did anyone else assemble their MALM 6 drawer dresser and some of the drawers are super hard to open? Any tips? We have a Koppang dresser from IKEA that slides open so easily, so we don’t know why the MALM doesn’t. We’ve tried tightening everything but it’s still super hard to open some if not all of the drawers.

[@DZA714]

im struggling with the same issue that thing does not want to slide in

[@1boy2moms3pets]

If anyone has any tips, I’d love to hear them!!!

[@mollyvincent5940]

Me too! My top drawer is stuck and won’t move more than an inch

[@CountGrishnakh]

Did you unlock the black colored locking mechanism? I had to do that

[@deadboys007]

These locks are hot garbage they get stuck

[@DedraJenelle]

can this be put together without a drill?

[@michaelboyle7551]

Yes

[@nadiadebruycker7637]

I have 2 White and 1 brown side ....

[@user-zw1es4pi5k]

I don’t see the difference between the DR & DL drawer slide 😭 Somebody Help Me!!

[@sofiyah5886]

If you look closely on the white part DL/DR is engraved in it… and the black pieces on them will be labeled L for left and R for right

[@WheresNaldo]

27:24 That’s a DR rail and goes on the other side.

[@scoutblair]

Your the shit ❤

[@AKLFC535]

NUNEZ !

[@cygnus2954]

26:25 is the most confusing step. I don’t understand how this is supposed to attach with the previous step. You showed it all from an angle that does not correlate with the instructions at all

[@cygnus2954]

Never mind. There was a severe lapse of judgment in my evaluation of this video compared with my dresser. I am sorry for being rude and I hope you can forgive me. I am constantly working on improving myself

[@brucehulkbanner3438]

You slide the cardboard along the back panel first and insert the cardboard back into the sides by opening them a little bit. I'm doing it now and it's no issue

[@brucehulkbanner3438]

Or you can do it per the instructions. Either way you work the cardboard in all the slots

[@LuisRamos-sg8vy]

I hate this drawer

[@mysterytaurus]

why

[@daraudobong7195]

Yes! It’s so flimsy! Better off paying more money for a sturdier product

[@chloedits-ou4kc]

@@daraudobong7195shoot I just bought it..