Updated Tour of My Matco JSC 770 Roll Cart OCT 2020

[@Toyotas_n__Tools]

I love it when you do these videos and touch everything to tell us what it is! =) Thanks Mike for the tool prn!

[@mrbananamanification]

The feeling When he finds the picks... we all felt that pain before

[@marko11kram]

Yup

[@magicbeanparty9324]

I work at Matco and I gotta say it’s awesome to actually see one of these put to good use. The 770s and 773s are great boxes

[@thechryslertechnician321]

FIRST......... 26 minute video in depth on the 770, great way to start the day Happy Friday

[@MiguelMartinez-hm1hg]

The good thing of lossing tools is the you get to buy new ones the bad tou need to spend the money great video

[@etchosts8162]

When you did a video a long time ago on your first tour i setup my box very similar to yours I was new in the industry I love it I have never looked back! Thank you

[@terremolander931]

Thanks for the tour. “Lost it. Found it”. Awesome statement. I have three 19mm deep impact sockets.

[@nitrous07me]

When I lose a tool at work, I instantly have a bad day 😂

[@FourRingsAuto]

I lost my 19mm 3/8 snap on impact socket for 3 days. When I realised it was definitely a bad day. Next day i came in one of the other guys said they found it on the silicone gun - i had been trying to get the last out the silicone tube! I'll make sure to use a cheap socket next time!!

[@jacob2483]

@@FourRingsAuto sounds like a pretty good coworker.

[@FourRingsAuto]

@@jacob2483 I couldn't work with thieves.

[@jacob2483]

@@FourRingsAuto I live Albuquerque though, bad place I hate it. The guys I work with pretty much just have cheap tools. I have mostly average tools but a few expensive ones. Idk here you just never know. But yeah I don’t blame you I’m young but trying to move somewhere later

[@charlespayne1909]

This is better . Than most tool box tour. On KZbin.

[@patrickleonard5034]

Those Gearwrench long box ends are awesome i love my set use them for everything! They are fairly tough I’ve only broke the 8mm

[@williamremington1112]

Yay. Your the proud owner of two double picks. I now own two 7/32 semi deep snap on sockets. How the original ended up in my washing machine is beyond me! Awesome video!

[@ChadG2]

You got great taste in color cant beat orange and great taste in roll carts.

[@moparfanboy]

Matco sells 20, 21 and 22 ADV impacts in 3/8. Had to go to Capri for 23 & 24 as they’re similar length & thickness in both deeps and standards

[@luigigonzalez5062]

Amen, that's the reason we buy from the tool truck SERVICE . We are lazy to warranty tools other way that give it back to the tool guy

[@FourRingsAuto]

Williams 12M-622 is a williams usa 22mm deep 3/8 impact 6 point socket.

[@ronanderson1816]

have you tried Tub-a-Towels?

[@MrConcertVibes]

You should do a dedicated plier drawer video going through every single one that you use regularly and what they're good for and maybe rank them as to what order to buy them in or an essential top ten or something. You can't really see what they all are in this video. I'm sure some you see as essential and some that don't get used very often any insights would be appreciated. Big fan keep it up.

[@michael2363]

Hey mike can you make a video about mechanics wanting to get out off mechanic work ? I was a mechanic for 4 years for Nissan and now I am a service manager for Firestone for me it was a great choice because I no longer have to deal with the headaches that comes with the job nor do I have to spend thousands on tools and I make more money now . But I would love to see a video of your opinion !

[@russelldimond2759]

I'm actually studying to be an automotive technician. And my college has a Nissan program that's part of the general automotive degree. So I'm probably gonna become a Nissan or Infiniti dealer tech. Is the pay any good. And do you have any tips

[@michael2363]

@@russelldimond2759 Nissan is a really good brand to work for but very strict with certifications so if you decided to become a Nissan tech I suggest that the moment you get your Nissan academy training to get it done as fast as possible . When I first got it I would spend normally 3 to 4 hours a day doing my training at home until i passed my requirement tests to do hands on training for each category . And pay well like any other job it depends on where you live but in my area staring pay is between $18-22hr depending on what’s experience you have, master techs make around $32-36hr and GTR techs make the most idk how much though . Oh and don’t expect to work on a GTR for about 7 to 8 years that is what the GTR techs told me It took them to be GTR certified since you have to be a ASE and Nissan certified master tech before you can take the class

[@mecalpsha4473]

Like the ORANGE favorite color and easiest to see like KTM!

[@diegorubio1073]

Awesome video I love the tool box/ roll carts tours

[@jasonlecreux1175]

I’ve been in the business for a little bit now, but I’ve newly started at a Honda dealership. With modern Honda’s would you still recommend picking up some JIS? I can’t say I’ve ever actually needed them, but would it help with some of their rotors screws and splash shield screws that appear to be #3 Phillips?

[@justindawson3872]

So I work part time in an automotive shop and go to school as well. I don't have a Macto guy, would you recommend I go with the ADV 1/2 drive deep well,over the snap on?

[@flatratemaster]

Gray pneumatic or sunnex will do just as well

[@austinshores3324]

What about grey pnumatic due sockets they are very thin and not to pricy for starting out

[@henryramos378]

I would go with the sunex brand because Matco rebrands them, so you’ll have good tool truck quality sockets

[@christopherelrod8788]

That two sets of picks moment is the reason Im reluctant to buy another 15mm flankdrive wrench from snapon🤣🤣. I hate having doubles only doubles I want are the smaller sockets 8 -13mm. I find those are the typical sockets I break. Maybe the occasional 15 or 17

[@Safeandsanepyro]

Have you gotten the astro low profile sockets!? Got them a couple of weeks ago, and I have them in my hand all day now

[@_DC5DEE]

I wish I had that Milwaukee drawer 😥 Awesome tools man! 🔧💯

[@FourRingsAuto]

I had never seen swivel triple squares before. Guessing another VIM tool. What do you think on quality/how have they been holding up?

[@flatratemaster]

I have both Snap on and a set of vim, both work well

[@jaymechanic1228]

Great toolbox tour ! Really enjoy your channel and i love your video quality!! So clear and edits are 👌👌

[@zannusx]

I got the Matco version of those double box wrenches also just for the ease of warranty

[@codywinkle9971]

Wait if we have the same glove lady?! 😂 I’m in San Diego county, not sure your location but that would be funny if we have the same person!

[@markebbage9996]

I liked the old Bel Air tool box, it had class.

[@StoneColdStrah]

I have similar box...the only difference is it says MAC and it's red

[@get_wrx9618]

Hey Mike I'm starting my new job As a Lube Tech and I was wondering which impact I should get from Milwaukee. The M12 stubby or the M18 mid torque.

[@henryramos378]

M18 3/8 mid torque is the way to go, specially for lube tech

[@get_wrx9618]

@@henryramos378 Okay! Thanks man i really appreciate it!

[@lewydmusic]

Dude, 1/2 impact required, you gotta take wheels off!!

[@8power0]

BEST DAM VIDEO ON KZbin,,, WE MISS THOSE ROLL CART VIDEOS SO MUCH !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@TinoR626]

the big difference between the 770 and the 773 is the 773 has been update to a year year warranty. As for a 22 impact sanp on is still keen on selling skip sets, why get a 22 when you can buy the sae set and use the 7/8. If your a fan of the matco adv you can get both 22 sockets for under 20. the short is like 6.60 wile the deep is right around 11 bucks BDP22M6V and

[@chryslertechnician3439]

Thanks for bringing us great videos all the time

[@carlosybarra5575]

No tool cart is complete without a couple of broken pocket pry bars. 😅

[@johngibson3594]

Thanks for sharing your your update of your tool cart

[@Alanthe918mobilemechanic]

If I loose a tool at work all doors are closed and I’m on the loud speaker saying what I lost snd letting everyone know their locked in and aren’t going home till the tool shows up. It’s only happened once and since then no one snd I mean not even new dare to ask me or “borrow” any tool from me

[@Alanthe918mobilemechanic]

@Bones McGillicuddy it would be but in 9 years of doing the job I’ve never left a tool on a or in a customer’s vehicle but I’ve worked with plenty of guys who leave magnetic 🧲 lights on ppls cars and they get so made since most of the time when it happens a ticket wasn’t made fully on the car so they couldn’t get ahold of the customer that was just at the shop 😂😂 That’s why I don’t ever move faster then I want to rushing and moving quickly is when you make mistakes or even worse lose your overpriced tools in a customers vehicle which isn’t only super unprofessional but it shows that customer where your head was while working on their car. Plus you leave a dirty tool inside of a car not even under the hood like I’m actually in the cabin…that’s just straight unprofessional…. I have a system and I use tons of big magnetic metal and rubber trays never lose parts or tools

[@FranciscoJimenez-bb7fk]

what is the name of the plier rack/holder

[@flatratemaster]

Made by lisle tools

[@John_Rod]

A lot of snap on dealers will warranty mountain double sided wrenches.

[@08xrider]

More info on the belt wear tool? Can't seem to find any on Amazon lol. I Would like to do something better than just a visual inspection. Appreciate the videos and any help you can give me with this.

[@MR-je1jb]

They have them free at Advance Auto. They're made by Dayco and are blue in color. They usually sit in a box on the counter.

[@08xrider]

@@MR-je1jb Thank you. I usually go to autozone and had never seen them. I will make a trip out to advance auto today.

[@flatratemaster]

As other said, contact a belt manufacturer, they give them out for free

[@tracydiller9378]

Nice setup there Mike at least your giving Toolbox and Toolcart tours unlike a certain other You tuber won't mention any names E.O. LOL Keep them coming.

[@FourRingsAuto]

Hahaha SMA! Love his stuff tho.

[@gieauto7175]

When do you decide to add tools to the cart?

[@bdunn854]

What brand was the “best panel clip tool on the market”?

[@flatratemaster]

Dent fix has them

[@TinoR626]

Matco sell them as well PCP920. I would have to agree a great tool.

[@Brett12889]

Can you open the drawers on the Matco JCS 770/773 with the lid closed?

[@flatratemaster]

Yes as long as the lid is unlocked

[@kylew657]

I need a new cart. Transfered locations and tow company flipped mine and destroyed it.

[@nakian5316]

Sounds like the tow company owes you a new cart

[@kylew657]

@@nakian5316 being ordered today by them.

[@nakian5316]

@@kylew657 Nice. What cart did you get?

[@kylew657]

@@nakian5316 6 drawer flip top cart from extreme tools

[@blkthunderbolt]

Cause a 7/8 comes out to 22.2mm. So u got a extra 2 tenths of a millimeter to work with.

[@lawrenceashworth7668]

Nice setup !

[@mikemata623]

What brand are those deep well e torx sockets? Been trying to find some with no luck.

[@flatratemaster]

Vim tools, i also have a set from koken

[@FourRingsAuto]

The Vim ones are on amazon. I'm waiting on a set on order as FRM seems to rate VIM stuff. We don't have it in Australia.

[@joedirt1712]

Nice love people’s tool cart videos 👍

[@honda_doc6826]

Thanks for the update.

[@Rene_W204]

Those Jeep’s fords and Toyota’s and idk who else use those lug nuts with “chrome caps” I call them, that expand and turn into 22 from 21 and 22 to 22.5...🙄 hate those things

[@scuba422123]

mike... hope you did ok with zeta passing through

[@flatratemaster]

Lost power for a minute at my house, alot of my town did lose power thougg

[@PhillyDee215]

Nice cart, everything u would need on a daily basis👍

[@TheRushrules06]

Got to ask what are weighted sockets used for

[@flatratemaster]

Crank bolts

[@christopherelrod8788]

The heavier the socket the more force actually goes into the bolt because intertia of the socket turning really helps. Wish I had one the first time I did my timing on my old accord. Took two days to pull the one damn bolt (was at home with a 3/8ths electric impact which supposedly had 350lb ft of torque)

[@TheRushrules06]

Thanks I had know idea what they where used for but that makes since. I also ain’t a professional tech anymore haven’t been since 09 did mostly suspension when I did thanks for the info

[@JerryAdjoyi]

oh those are the picks i found under a hood

[@lprock4730]

Capri has 22 3/8 impact

[@fumanpoo4725]

That is a fine cart...

[@TheElfather21]

thank god my job replaces broken tools for the guys in the maintance department

[@gieauto7175]

Good video but kind of long. Since most of us operate in 10th of an hour increments the video could've been split along those lines. Still liked the video would have been easier to consume with a top under the lid view then draw view. With comments on how often you reach into the draws. At least that is how I watched.

[@harmonygritz2839]

He looks like Ed Rendell

[@mudsling79]

22mm equals 7/8" they are interchangeable and you will see metric sets skip it

[@ozzyrios.560]

Love your tool box!!!!! Going to have one one day!!

[@victormontero8388]

Nice 2011 saab 9-5

[@chuckmiller5763]

Your picks got put exactly where you put them. You did that, nobody snuck in to the shop in the middle of the night and moved them on you.

[@kylapendley924]

Lol your tools are disgusting please clean them once a while. Love the channel tho!

[@j06c]

Whats the part number of the cart side tray