Update Tour of my Matco JSC770 Roll Cart

[@CPthetooladdict]

I can watch tours over and over they are just incredible I don't know why lol thanks for sharing!

[@davidblaze1652]

Cause you're a REAL Tool Addict 👍

[@NuKe11Killer]

Same I’ve recently been watching like 5 tours daily I have no idea why they’re just so interesting

[@BlindBatG34]

I was really hoping to see the top drawer lined with spanish cedar, a couple boveda packs, some old wise men, Padrons and Fuentes.

[@flatratemaster]

In the summer it gets way to hot to store cigars at the shop😞 so i bring them in everyday in a travel humidor

[@TheMechanicj]

Flat Rate Master I would like to see you rant about customers who wanna borrow tools surprisingly it happens to me a lot just yesterday had a customer changing thier one beakes and could not get the rotor off due to rust wanted to borrow my air hammer cause theirs from walmart sucked have also been asked to use my press and my hub grappler and my lift after the shop closed of course all was a big fat NO of course

[@TheMechanicj]

I mean hell far I only charge 30$ to press a bearing if they bring me the knuckle

[@rustybrowneye]

I used the plastic wedges to break into cars when I was Towing. Works ideal for wedging the top of the door open so you can get a rod in there to poke the unlock button

[@Kingdan2011]

He said in a video last year he used it for window regulators on vehicles with frameless windows

[@epicragegaming2016]

thanks for making this kind of video. always nice to see what other guys have that i don't, then i can think if i need it and add it to my tool horde.

[@Kingdan2011]

Remember the wedges for window regulators without a frame support since you can't use masking tape you made the tip last year

[@billyfrancis9635]

If you buy a socket set from snap on you can use that magnet bottom and put it on your tool box for various things. Works great for me if you don't want to spend the extra money.

[@orville58]

Is that Eric “O’s” music lol that looks like a deep top compartment thanks for sharing all the knowledge and videos I’m sure it’s time consuming please keep them coming

[@HelloHello-qs5ny]

Very nice setup like how your diversified on your tools just not fan boy of one brand but what works best at best prices

[@maxwellpeter1598]

Ocd is a real thing in this industry

[@johnhnetkovsky8917]

When I was young that was a toolbox and whole set of tools!

[@johnduff6436]

Me too!

[@rubbermallet3873]

for sure, probably, this is the best tool box tour i've ever seen bro 🤔🤠👀👍

[@Toyotas_n__Tools]

I highly suggest picking up the capri master torx set they even have the tiny sizes like t6! They have a 80pc or so master set for $200 on amazon, I know people that have never warrantied a bit socket from capri when they have their same snap on bit sockets atleast once in the same amount of time.. The capri's can be abused and take it like it loves it =P I always enjoy your toolbox videos, you do a good job of pointing each thing out rather having us play eagle n stare lol

[@CopCat34]

Thanks for the tool cart video. Very nice set up.

[@8power0]

MIKE GREAT VIDEO , COULD YOU TELL ME WHAT DO YOU THINK THE VALUE OF THE CART IS WITH TOOLS AND HOW LONG IT TOOK YOU TO KNOW WHAT YOU NEEDED AND TO ASSEMBLE THEM . ALWAYS LOOK FORWARD TO YOUR VIDEOS THANK YOU FOR YOUR TIME !

[@flatratemaster]

What's in my cart is based on what i work on, if i worked on less VW i wouldn't have triple squares in the cart etc. Cost no idea

[@aldonco]

Where is the cigar humidor?

[@jacksonstorm6395]

Mike , take a rag , get some atf on it , and clean those ' orange ' screw drivers off . Lol. I clean all my handles and assorted tools with atf, it's high in detergent and will get the dirt / grime build up off and make them look new, or less used.

[@flatratemaster]

🤷‍♂️

[@ygoteamtarox3823]

Please do a video on how you clean off RTV/silicone from sealing surfaces. I’m a second year tech just moved into heavy line and I struggle getting silicone off efficiently. I believe in part due to the fact I’m not sure what I can and can’t use safely to remove the stuff. Thanks

[@josephpuchel6497]

Hey Just what’s needed and organized. I’m thinking of changing out my socket rails to magnetic. My cordless are Snapon but thinking about the stubby Milwaukee Excellent video

[@x2122]

I need a new cart bad. My MAc is about 15 years old with the sliding split top but only 3 drawers and im running out of room

[@jamesu]

Thanks Michael. I was straightening up my cart last night after work.

[@Alexitocubanito]

Hello Sr. I'm not a mechanic by any means but I can afford to buy a decent tool box like Extreme Tools 41″ 6-Drawer Deluxe Tool Cart or Extreme Tools 72″ x 30″ Deep, 19 Drawers Triple Bank Roller Cabinet. I just work on my own cars and I have a lot of tools. What do you recommend for just a home guy of those 2 options???????

[@alfredgarcia7459]

Nice setup personally I like to have all my sockets on top don’t like keeping them in the plastic boxes they take up space

[@keithkapusinsky786]

I see the zep brake clean! It the van tyle company that owned the dealership I worked for!

[@keithkapusinsky786]

Nothing like a company screwing it own dealership!

[@DJDrawgZ]

I’m a Diesel mechanic and those ultra long needle nose pliers are amazing for getting on brake shoe spring. Best tool ever for it. Other wise ur using a slotted prybar and it’s a nightmare

[@codyfinchum890]

Have you tried using vise grip and sheer force that how we doing on trailers

[@AVBibleBelieverMan]

I put the big spring on first, line the s-cam and brake anchors up and attach the little ones with a giant screwdriver. It’s easy and I’m not fighting that big spring.

[@alexanderthegrape5370]

Dang! How big is your shop to be so far from your box that you need a fully loaded cart like that lol that's crazy.

[@x_p_g_x]

Great video. I have one of these on order Jsc773 should be here in the next week. ✊🏽

[@CANDiagnostic]

Can u do an update of your diag cart please

[@billyfrancis9635]

How do you like those swivel ratcheting wrenches? I always thought you'd break your knuckles using them

[@wayneshanks148]

Awesome box and tool's brother love it

[@shaneprescott432]

My scanner got stolen was a laptop with Delphi software ,all data, Mitchell , pico scope . I was doing brakes on site on Audi A4 . I'm screwed .

[@FourRingsAuto]

Why do you no longer using the snap on Torx sockets? Interested into hearing what you prefer.

[@flatratemaster]

My most used torx is t30 snap on it 3/8 drive the matco is 1/4

[@beilno2890]

I am cruious on yours and other thoughts on flip tops vs a slide/split top?

[@mecalpsha4473]

*MATCO* has the best screwdrivers/ratchets/prybars/swivel impacts as well and chrome/impacts

[@alfredgarcia7459]

Mec Alpsha yup and they warranty the whole screwdriver not just end of it like snap on does

[@mecalpsha4473]

@@alfredgarcia7459 I agree and they got the best handle. Always had great service from MATCO.

[@stevebanda8776]

I wish we had a matco dealer around here i kno most of there stuff is rebranded but there ratchets seem good I like the design. All we have is snap on around here.

[@mecalpsha4473]

@@stevebanda8776 It has the name MATCO on it - regardless it is warrantied and great quality.

[@tjs162009]

Where did you get the shorter and longer VIM Magrails that you have on the inside of the cart lid? The shorter and longer ones you have stacked next to each other. Part numbers? Thanks!

[@flatratemaster]

Cut off wheel😉

[@tjs162009]

@@flatratemaster After I looked closed I can see the mag rails say Mac Tools on them. At The start of the video you said they were vim mag rails. I couldn't find anything that looked like them on the vim website.

[@flatratemaster]

@@tjs162009 those i bought off the mac truck, i didn't see them on Vims site, Mac exclusive maybe?

[@NotYourAverageRalf]

You really need some tool box widgets and olsa tool organizers brother!

[@gregblau8082]

How’s the build quality compared to the old one you had? I’m looking to downsize the 770 to a 480 for mobility and assume they’re just as solid.

[@flatratemaster]

I had a 480, built quality it rock solid

[@gregblau8082]

Thanks the 2 problems I have with the 770 are too big and the drawers open if I don’t lock it with the key. The 480 looks like it’ll solve both of those and I’m pretty confident I’ll be happy with it

[@normansmith7806]

Really nice setup Michael !!

[@flatratemaster]

Thanks Norman

[@jdpower5552]

why do honda's require special screw drivers?

[@flatratemaster]

All Japanese brands use a slightly different profile Phillips screw, called jis, you don't need them but they do work better on stuck screws

[@chryslertechnician3439]

Do you perfer the Matco ratchets ? Instead of snapon

[@flatratemaster]

yes

[@danohstoolbox]

Nice box you got it going on FRM Great video brother

[@johnny6426]

Do your mac flex head wrenches have a pin on the side if so what’s it for?

[@flatratemaster]

Hinge for the flex head

[@1970chevelle396]

Looks like the same utility knife I carry.

[@eddieds312]

What would you do with all those tools if you leave the industry

[@mt1885]

This is the real world, where a man works not want a Communist like Burrney Comrade Sandoors to tuck you in at night.

[@flatratemaster]

Not leaving anytime soon so🤷‍♂️

[@stilltrying4435]

Thanks for the update.

[@Terry_Baker]

Nice cart. Been looking to get one to match my Matco 6S..

[@donaldpainter956]

Eric O could market his own brake clean and it would out sale every other brand

[@ralphosborn8589]

I feel like FRM has been called out one too many times for flip flops 😂😂😂

[@doug2278]

Lol bro u got mad organizers but it looks messy 😂 just given u shit lol looking to getting a few things u got

[@toolsmetals2148]

Love that box Great video

[@jo4mendoza]

Is it me or dose he skip 23mm sockets

[@flatratemaster]

Yep no 23s

[@ironrangeautotech8292]

Nice setup 👍

[@johngibson3594]

Thanks for sharing your stuff

[@StoneColdStrah]

blue point are great

[@honda_doc6826]

Thanks.

[@johnduff6436]

Don't tease on things like "very old Snapon universal", show it us close up!😁

[@mattkaminski1900]

You on lunch yet lol I know your working right now, hows work going today ? Lol

[@genekelley2035]

Nice!

[@JW-ek5vx]

Too many tools in the service cart it’s too heavy

[@maxwellpeter1598]

That my friend is why it has wheels

[@jacksonstorm6395]

Honestly I think it's a bit light on socket selection, but I hate going back to my box , which is why my cart is loaded down.

[@CanadianCharlie64]

How this DIY'er wishes he was a pro tech and working in the same shop as you

[@joshjoy2535]

Nice👍

[@tylerpearce2891]

Sorry you may know more than me but if you need a European lug finder tool your a rookie and not that good or efficient at changing tires

[@tylerpearce2891]

Your a flat rate master you should be able to do that with out a tool

[@bluecollarballer3002]

‘W

[@militarygradegear4004]

100th!!

[@j06c]

Do you know the part nimber for that tray

[@j06c]

I wish secobd drswer was an 1" deeper so i could put my multi meter