Upgrade to Garmin Autopilot Reactor 40 - Marine Tech Vlog#7

In this episode, Matt takes significant strides in the Autopilot project, starting off by installing a new fuse panel to enhance the electrical system. This step is crucial before diving into the installation of the Garmin Reactor 40 Hydraulic Autopilot with SmartPump. After a successful installation, the focus shifts to replacing the Steering Cylinder Seals using our AMT0004 tool. The final phase involves employing the AMT0106 Bleed System Kit to bleed the hydraulic system thoroughly, ensuring there are no leaks and that the setup is immaculately installed. Join us in this technical journey and gain insights into a seamless Autopilot transition for your vessel.
See you in the next update!
More of Our Adventures:
• We Bought a Boat - Marine Tech - Vlog#1
• We Bought a Boat - Mar...
• Why We Bought It & Our Restoration Plans - Marine Tech Vlog#2
• Why We Bought It & Our...
• Yamaha 3.3L F225, Rough idle, not charging, not peeing - Marine Tech Vlog#3
• Yamaha 3.3L F225, Roug...
• We ran 220 miles with the gearcase Full of water! - Marine Tech Vlog#4
• 200 Hours Service on Y...
• $10K Electronics Upgrade - Marine Tech Vlog#5
• $10K Electronics Upgra...
• Installing Garmin GT51M Thru-Hull Transducer - Marine Tech Vlog#6
• Installing Garmin GT51...
• Contender Vlog
• Contender 31 Project
How To…:
• Yamaka 100 Hour Service
• Yamaha 100 Hour Service
• Bleed SeaStar and Uflex Steering with Marine Tech Bleed System (Full How To)
• Bleed SeaStar and Ufle...
• Yamaha Gear Case Upper Seals - Teardown and Replace
• Yamaha Gear Case Upper...
Equip yourself for your own restoration journey with our tools.
A Free Hat for Signing Up: marinetech.com/
Stay connected on our other platforms:
• Facebook: / marinetechtools
• Instagram: / marine_tech_tools
Thanks for watching. Sincerely, the Marine Tech team.

[@USA4thewin]

man he said loctite 454 when it was actually 545... I love you dude ,, I do the same thing all the time thought i was the only one

[@LifeOnTheHulls]

Thanks mate for the video.I will be installing this pump on my Catamaran Build in the coming month, appreciate the video.Cheers Ross

[@scottallen7195]

Love your content,thanks for sharing… I aspire to have my wires as neat as yours,I plan on installing this on my boat but not sure I’m capable of this … my patience’s would be shot & id lose my place in the middle of waiting on parts,I’d hire you in a heart beat to work on my boat !

[@wolflightcapital3365]

Thanks for the in depth video!

[@MarineTechTools]

Glad it was helpful!

[@charlesreece1704]

I have a Seastar H50 Hynautic helm with 5/16" hoses. Upper and Lower helm. What fittings are needed to connect to the Smartpump V2. Liked watching the install. What have you heard bad about the shadow drive?

[@talakot5]

At 12:50 you mention hooking the pump up to the fuse block with a 40 amp fuse. I’m pretty sure the Blue Sea fuse blocks are rated for 30 amp per circuit. Isn’t that going to be an issue?

[@paul.ewarshefski9767]

Sealant was put on the threads BECAUSE you are in a Corrosive Environment Keeps the threads from Galling ,,Locktight & antiseize works also

[@joejuska5390]

What happens when a wake dumps the captain over the side while on auto pilot ? Cut off lanyard?

[@MarineTechTools]

The auto pilot only manages the steering so the over board situation is the same, the boat will just go it a perfectly strait line or navigate up whatever track was set. I will add that now that I have used it, I would have a hard time offshore without it. Perfect heading regardless of conditions, saves a lot of effort.

[@Brian-ir5ii]

*Promo SM*