Upgrade your highways in 5 minutes with this simple Interchange | Cities: Skylines | Tutorial

[@tigonologdring9189]

I've always rebuilt those anyway but the over-and-under technique looks nicer than the double-over I think. Nice build as per usual Imperatur.

[@imperatur]

Thanks buddy:)

[@SoWhiskey]

Me too dude, in my opinion double-over design seems just too much for a relatively small interchange.

[@courageouschronicler8657]

I usually do the double under, but this looks groovy, too!

[@TS_Mind_Swept]

Double over would also cost far more to build IRL

[@erikaaa1180]

I dont think this is any change in traffic and just as effective as the normal one

[@sifk6163]

Biffa is questioning the lane mathematics here... Great stuff as always, Imperatur!

[@courageouschronicler8657]

Ha! Watching those dinglehoppers go from the off ramp on the left to the lane on the far right hurt my heart. All hail TM:PE!

[@fede9003]

Some people don’t have the dlc (mass transit) but yeah it hurt for me too

[@TS_Mind_Swept]

I was as well

[@TS_Mind_Swept]

@@fede9003 fortunately there are loads of free assets on the workshop you can download to do the same thing :p

[@gevurgeldi5423]

@@courageouschronicler8657 I do that on real life tho its not unrealistic

[@joshgellock]

Hands down, the best vanilla content for Cities Skylines on KZbin. Thank you for these tutorials!

[@-guest89-]

So cool man! But if I have to be honest, I love HUGE interchanges because they're so satisfing to watch! 😌

[@imperatur]

Thanks!:) yeah i love watching the traffic flow

[@DarKKlusteR]

Imperatur: "Are you still using this?" My Map: No just 2 highways on each end of the starting square

[@Ambersmite]

I combined this with smooth exit ramps and it looks great! And instead of doing the underground stuff I used tunnels which saved me space since I had to build this inside the city center

[@imperatur]

Great🥰

[@CakeboyRiP]

Your instructions are as clear as the glass window i bumped into 👍🏻

[@pyrex2177]

I can only imagine Biffa seing this and screaming "LANE MATHEMATHICS!!!" The through highway staying at 3 lanes per side even tho there's one going off. Aswell as the ending highway having 3 lanes but each ramp only has one lane per direction.

[@Zyo117]

This is a vanilla build. Vanilla only has 3 lane highways and ramps.

[@MikeMazue84]

@@Zyo117 nah also has 2 lanes once you've unlcked more squares

[@Zyo117]

@@MikeMazue84 No it doesn't? 2 lane highways are a Mass Transit DLC item. The vanilla game only has 3 lane and off ramps.

[@christianluis7851]

I will so use this interchange in my city! Never miss one of your videos

[@imperatur]

Thanks for your support mate❤️

[@christopher6740]

“Time to decorate, but you don’t have to do that” Yes you do!

[@jagnes632]

I have always rebuilt these too, but instead of landscaping I have always just ran a tunnel underneath...I think this looks better... more symmetrical!

[@alwayzdancing]

Glad to have found this tutorial again…lost track of it after having used it before…tried to remember and got most of it down save a few key techniques…thanks for sharing your talents!

[@safipasa2028]

Yes i will and maybe some more using the technique i learned from this built.

[@imperatur]

Cool ☺️

[@patrickjn]

"We don't do that here" got me xD

[@franciszekkonador9149]

Fact that he doesn't pause the game while he demolish road and rebuild it mildly infuriates me.

[@zulumike3228]

Its fun to keep it real time and keep the clock moving. I like tobuilt alt routes and detours for a more emersive experience.

[@justinheckeljr.9206]

Like, cars are diapering?! Lol 😂

[@cofa4011]

Dude this channel is an unidentified object xD Came for the advices but you have a great sense of humour and amazing urban planning skills! Amazing content man !

[@Sohampn]

I never place vanilla interchanges in my city and rebuild the vanilla interchanges there on the map. I usually go with trumpet interchanges in a three way intersection but I will try this too!

[@imperatur]

Yeah trumpet interchanges are very cool too:)

[@UsmanMuhammadNooruddin]

Watching your videos (your entire channel actually) resembles an artist drawing a painting. It's exceptionally interesting and exceptionally beautiful. Always love your work dude.

[@imperatur]

I‘m glad to hear that bro😌

[@enzmerc]

This is a great idea for an interchange. Nowadays, I'm opposed to a trumpet interchange because it has a loop, which the centripetal force is harder on bigger vehicles like a semi truck. This is good because it's more aerodynamic compared to a partial cloverleaf/ trumpet interchange

[@julianmrtns1819]

This is far the best quality KZbin tutorial video

[@dracosummoner]

Definitely looking forward to trying this and adding decorations, thanks so much!

[@bartoszwroblewski8221]

I think that you should put it on workshop. Great build as always!

[@bryinusa]

Nice. Will give this a shot! 👍

[@macie33k]

You're finally back!

[@imperatur]

Yeah sorry again😌

[@iwasborn8470]

Epic build imperatur!

[@bbbenj]

As usual, an episode with an amazing quality! 👍

[@astrodweeb2638]

Saved to my Cities: Skylines playlist!

[@hassestockholm]

Just proves it: the simple is the best. Great solution.

[@JediTev]

I did do something like this. I have two major freeways coming together going the same direction. I ran one of the directions under the other freeway. I used the fine roads tool and move it to sink the road.

[@airwayjake3240]

Awesome interchange

[@imperatur]

Thanks:)

[@Bambi298_LP]

Sieht echt schick aus👍🏻😍 Aber....Lane Mathematics... wie kannst du das nur vergessen😲😂

[@yannickmaessen8266]

Has it also any difference besides that it looks slightly better? Like does the traffic flow better etc.?

[@PauxloE]

If you already have some kind of city, pause the game before demolishing the old interchange, to not break the traffic flow too much. (Though I guess this way is more realistic. Even more would be to block the highways on the previous exit before starting the construction works.)

[@nilscibula5320]

Nice and simple to build interchange, but you can improve it by making the highway 2-lane in both directions between the offramp and the onramp.

[@jayiifulbackup393]

Your videos always motivate me to go play cities skylines Lol

[@emubbq]

sick build. i used it to fix my interchange!

[@delroyclarke1989]

Love the episode, I personally would use the one you just built, more realistic than the vanilla one in the base game

[@clnetrooper]

I have a kink for trumpet interchange, they look nice and are compact.

[@sankalpmishraOFFICIAL]

Finally After a Long time

[@SoWhiskey]

Very nice, neat design. 👍

[@Nictona]

Wait im confused, you rebuilt the t interchange into a t interchange?

[@Exiled9999]

Yes i well use it ✨

[@imperatur]

Great🥰

[@ITBEurgava]

No, your imperial majesty. I deleted every single one of such interchange and replaced it with trumpets. Yours is probably more space-efficient, so thank you.

[@bigcapra]

That's reeeal nice.

[@cristianruiz1972]

Very good!

[@geon8207]

Amazing ☺️

[@imperatur]

Thanks:)

[@dolomite13]

Except for a little lane mathematics this is a fantastic tutorial. Great job!!!

[@prithvirudrawarrier2307]

Because of u I downloaded cities skylines

[@imperatur]

Wow that‘s great to hear!:D

[@blarnzz]

Good concept, although i find the trumpet interchange an easier build. Def gonna add this one to my city though

[@WheatyWaffle]

How do you record the gameplay from one spot while building? I have never been able to figure this out!

[@HP_Burrito]

My guess would be the replay mod type of program

[@somewhereinagalaxyfarfaraway]

I would add a step where you fill the depression with water to build quay walls as bridge retaining walls before building the roads back.

[@ahdan8372]

2:19 maybe upgrade them with 2 lane highway instead so biffa would be proud 😂

[@imperatur]

Yeah u can totally do that with the mass transit dlc:)

[@tinamcbride5423]

Looks great

[@Flaim_101]

this really helped, but instead of digging i found it easier as a beginner to just make a tunnel, i hope that didnt mess it up 😅

[@WillemClub]

I build double overs usually or just tunnel under the road instead of digging and bridging it

[@justmearun]

Finally, someone has decided to use an underpass in City Skylines!! Hallelujah!!

[@Enigma3]

this looks great and a massive improvement on the original, but its pretty much the same thing function wise, right?

[@TeddyRadko]

CO should upgrade with this one!

[@deViant14]

I'm not sure if I would. I never see something like it IRL. Locally you'd be more likely to have a 2 way overpass or something fit to the terrain. 1 over and 1 under is unlikely. But for high throughput interchanges, maybe.

[@gregmaxwell2411]

Looks good

[@hansgurtelmann2889]

I like the design, but you can’t beat trumpet interchanges 😎

[@ediwchecker]

Das ist ja schön und gut, verstehe mich nicht falsch, aber macht die was besser als die Standard Kreuzung oder sieht sie nur schöner aus? :D

[@Lolicon0612]

Love this content

[@yukkyarzupro1108]

Whelp i like trumpet interchange btw. But still great build

[@yuvrajsinghrathore3710]

Impsy - Do you still use this? Me - ........ Can we?😂

[@G31M1]

Despite copying everything exactly as shown in the video I still got the steep terrain error and had to turn off snapping to angles in order to build the ramp. Also some of the curves were more expensive for me or looked odd. I just noticed that I have to set the points differently while building turns in the middle of trying to rebuild this.While this is a little frustrating I just hope that can't be noticed in the end product. (It can be noticed with the naked eye because the overpass lines extends a little further than the underpass line ;-; )

[@wallytheboss9741]

Thank you

[@pluxauag7555]

The perfect realistic T Interchange, where you start motorway runs left to right. Turn these into upward/downward curving lanes away from each other like the outline of a lemon. Have the vertical lanes curve within the lemon to join each horizontal curved lanes and you have a smooth T Junction motorway which you see in real life designs. I have an example on the Xbox Cities Skylines Club and it runs beautifully and looks incredible as detailing opportunity is huge. Curved into a junction is best and realistic. KZbin Channel - Road Guy Rob. Have a watch and of course Peter Dibble, great examples of real-life curve into Junction interchanges.

[@joshuatayloe8616]

This is actually how the I-80/I-280 Interchange is built. With the exception that the 2 ramps are Left Turns. It functions great in real life, but the Left Lane movements always worry me in Skylines.

[@ArturdeSousaRocha]

Ah, the archmaster of vanilla strikes again.

[@MaartenvanHeek]

Just yesterday I was trying (as the last thing to pick up for the day) an intersection but made a big mess... was too late to do anything about it so I plopped down the vanilla cloverleaf + T junction next to each other, and now my traffic is broken :(

[@PuiDeZmeuYT]

love this vid even though i only build trumpets 'cause they're easier to build

[@rons3103]

Can you upload this asset to the workshop, so I can download yours and stop using that one! Yeah, I know I'm being lazy, but it is hard to replicate perfection! 😁

[@TS_Mind_Swept]

Who else remembers when none of this was possible because Road guidelines, terraforming tools and elevations steps weren’t accessible in the base game; weave come so far

[@latenight6423]

Cool interchange🤔

[@qunewsguy]

With the extra space you gain I'm not sure you even need to flare out those on and off ramps.

[@highoncatnip_]

ok but how do i know i hit -9 landscaping?

[@ChiefWaller]

Head bang: Why didn't I think of that?!

[@benoitantonucci3241]

perfect

[@eddwar8597]

Yes, I will do

[@imperatur]

Awesome😚

[@CBFNetworksArchive]

I think that would be bad that you did put on the ending highway 3 lanes instead of 2. Otherwise, the traffic flow could be bad without disappearing vehicles!

[@roiking89]

I would like to understand why is different, just I can see the main road now have a bridge 🤔

[@justincredible1990]

What about on hilly terrain? These builds only show on perfectly flat land.

[@dennis9353]

I'm tearing them down completly most of time and build one-way roads in and out of town

[@xDogzYT]

yes im still using this 😂

[@imperatur]

Nooo😂

[@isasakarya7957]

Imperatur : Update in 5 minutes! Me : So hard! :(

[@woozie7034]

how can you see how much metros you're building ?

[@RX_GL]

You can make this better with lane mathematics because why did you add a lane and kept the 3-lane highway instead of changing it to a 2-lane highway?

[@sijiroy5535]

Next noob vs pro vs modder

[@imperatur]

Soon, i promise🙏🏻

[@MelbourneMaster]

Vanilla with precision engineering to measure units

[@Soundmilitaer]

Als nächstes das 4-wege-Autobahnkreuz perfektionieren (vanilla)

[@imperatur]

Haha ja stimmt:D

[@axercm4398]

Anybody know how can I unlock the tool to measure the distance of a road? In all this videos I notice that when they build a road they have a “u” that tell the length of it and I don’t know if it’s from a DLC, a mod or a tool in-game that I have to set up

[@anter176]

i believe it is from the Precisions Engineering mod

[@axercm4398]

@@anter176 I will check it out, thx 😊

[@steffdelange7982]

More realistic is to build a trumpet connection instead of this. More cost efficient and easier to build irl

[@cristianruiz1095]

I made a similar interchange for trains.

[@Admiral45-10]

You don't even know how much I'd want to do that, but I simply don't have enough space in my city😅

[@gyanendrasingh2003]

0:00 it hurts 😂

[@imperatur]

😂😂 it hurts that u use that😂

[@gyanendrasingh2003]

@@imperatur yes

[@benjaminandersson9484]

I Gonna try

[@madlessgamers2591]

My pc was laging with dlcs . What can i do please tell me 🥺

[@mattyperry1633]

Get a better pc

[@niccoloabate8519]

And mathematics lanes?

[@narcis4none]

This should have been originally in vanila default interchange "Lazy developers"