Upgrade Your Shadow CR920 with This!

[@Three60Crusader]

I may check one of these out down the road. Normally I don’t mess with triggers for carry pistols though but this one has me reconsidering.

[@rammtactical]

It's the best on the market! Click below and choose make and model of clones! thetriggerguyusa.com/product/aluminum-ramm-tactical-glock-leverage-trigger-glock-clones/

[@danswindowtinting2387]

The best triggers on the market 🙏🙌

[@HeavenlySounds365]

Need you to restock CR920 kits ASAP 😅

[@rammtactical]

@@HeavenlySounds365 we are on it. Should be in a week or so.

[@sheilaramm9699]

I think its time to update the pink camo trigger!

[@vinny_the_kid]

SS just came out with a video addressing some damages that are happening to their guns from aftermarket triggers. How many rounds have you put through the gun with this trigger, because I am considering buying this but a little hesitant now.

[@rammtactical]

Some aftermarket triggers may not uphold the factory safeties or integrity. You'll find that our triggers keep most factory parts intact. The trigger itself can be replaced while keeping the factory springs and connectors. Simply swap the trigger. I'm not aware of the link you are reading, but if you can post it in your comments, it may be helpful to many of our subscribers.

[@Rnemhrd]

​@rammtactical the SS trigger bar looks like is might be proprietary. It looks like the glock and bars made for glock aren't lifting the striker block at the correct time. kzbin.info/www/bejne/eIerfqyNl7iWg5Isi=4Hcfwq4-anc3nSIS

[@rammtactical]

I've tested Shadow Systems full size and sub compact with thousands of rnds. My tests are much harder on the gun than normal use. I beat them up and get them hot! No damage to the factory gun. I've even tested cheap PSA Daggers with no issues. My advice is if you are not certain when upgrading, don't upgrade. Stick with factory and if you have issues, then the factory may help you.

[@dougjobbagy7346]

Will this work properly with mr920 elite? Ive tried other drop in triggers, even a Johnny Glocks trigger, and they always seem to have a problem with the trigger safety catching against the back wall of the frame when the trigger is pulled. Its like there's not enough time for the safety tap to fully disengage due to the shorter throw and it knuckles off the frame at the last second before the break.

[@rammtactical]

I've had no complaints.

[@dougjobbagy7346]

@@rammtactical If your drop in trigger setup doesn't work correctly will you except a return? I'm referring to the issue I just described and or "no drop in trigger pull weight"

[@anthonyyowzer]

I guess I was four days too early for this new setup, haha. How much would it cost to get a rear block from you? Would that work with the kit I bought on the 18th?

[@rammtactical]

If you return the trigger you purchased, I'll gladly send you this style. Please email me if you want to change it.

[@Jepphhh]

what pull weight is the new trigger you put in ?

[@rammtactical]

@@Jepphhh you can choose from a range from low 3s to mid 4s. Should be back in stock in 2 weeks. thetriggerguyusa.com/product-category/al-glock-clones/

[@Jepphhh]

@@rammtactical thank you so much my cr920 needs this asap!

[@rammtactical]

@@Jepphhh Yes, our customers will agree with you! 👍and so do we!

[@Yxxx6]

Will this work with the MR920L? Also, is there bronze option?

[@rammtactical]

Goto clones on our web site. thetriggerguyusa.com/product-category/al-glock-clones/

[@rammtactical]

Sorry, no bronze options.

[@2afreedom1776]

Awesome!

[@JUHEBLA1776]

Would this work for a xr920 I would think lol and also would this work for a gen 5 G45?

[@rammtactical]

thetriggerguyusa.com/product/aluminum-ramm-tactical-glock-leverage-trigger-glock-clones/ For XR920 click above

[@rammtactical]

thetriggerguyusa.com/product/aluminum-ramm-tactical-glock-leverage-trigger-kit-gen-5/ For G45 click above

[@RomaniMTB]

That product is not advertised on your site, how do I get it?

[@rammtactical]

thetriggerguyusa.com/product/aluminum-ramm-tactical-glock-leverage-trigger-glock-clones/ Scroll down the screen to fields and select make and model clone you want.

[@RomaniMTB]

@@rammtactical thank you, buying it right now

[@kyleadolph1281]

Will this work on a 920XP?

[@rammtactical]

@@kyleadolph1281 this does not include the cr920x but will very soon. Check out our website in a week or so for available models.

[@philiprosenstock9667]

When you know you know!

[@danielcrandell7533]

does this work with the mr920 elite?

[@rammtactical]

Yes. Selecting under clones/ shadow/ MR920 thetriggerguyusa.com/product/aluminum-ramm-tactical-glock-leverage-trigger-glock-clones/

[@kphinney5704]

This may be the worst stock trigger I've owned. It's definitely worse than anything I currently own. I'll define worse as long and heavy. It isn't gritty like others mention. I was about to joke it is so heavy I could use a luggage scale to measure it, when I realized I HAVE a luggage scale. It reads 7.5lbs and that's after the 200 round break in! Sign Me Up!

[@rammtactical]

You won't believe it's the same gun after inhaling our CR920 trigger! 👍