Upgrading DVR and NVR using Putty

[@alirezataherpour1808]

Hi dear .. I have a question how to change hikvision mac ? Because i have 2 ip camera

[@buga89man23]

hikvision ds-7216hqhi-f2/n cant upgrade with tftp server,i use an usb serial rs458 usb with 2 pin when i open putty doesn't conect,my question i need a crossover internet cable to use tftp server?

[@beniptec]

Yes u need to plug network on your pc for data transfering

[@CagdasMonster937]

hey could you help me to connect my dvr with putty through WebPort:80 or MediaPort:9000 and get the files?

[@sundarg6640]

My hikvision dvr light is on further it does not boot and I don't know the Ip address. What to do?

[@beniptec]

This isseu sometimes dsp or flash ic

[@Ashokkumar-ue8jh]

How to change (edit)my hikvision dvr SERIAL number pls help

[@beniptec]

sorry we are not allowed

[@Ashokkumar-ue8jh]

@@beniptec ok

[@Ashokkumar-ue8jh]

Pls send command

[@beniptec]

@@Ashokkumar-ue8jh i will make new video for all command pls subscribe and share and hit the bell

[@ashokrai474]

Please.............

[@imouboximoubox7304]

Hi, Nice video. It is possible to restore to factory values. Can you help me?

[@beniptec]

erase all command and upload fw

[@beniptec]

arrange anydesk

[@beniptec]

yes possible to reset factory default for old model but new model is encrypted you need supplier support

[@beniptec]

yes

[@lucasgonzales9667]

Hi, I need change the verification code of IP camera, ds-2cd2012-i, can u help me?

[@beniptec]

cloud verification?

[@beniptec]

or encryption code?

[@beniptec]

Just login to cam browser ie the network/ advance / platform access and change verification key

[@jumanji-yt5808]

showing error please help solved this problem *** Warning - bad CRC, using default environment Hit ctrl+u to stop autoboot: 0 ### CRAMFS load complete: 3589208 bytes loaded to 0x42000000 ## Booting kernel from Legacy Image at 42000000 ... Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Thu Jan 1 00:23:58 UTC 1970 Starting udev: [ OK ] sdbg: serverip:192.0.0.128 fastboot is BusyBox v1.2.1 Protect Shell (psh) Enter 'help' for a list of davinci system commands. # / ---------- tar guir webs ---------- ded in[/home/hik/sys_app.tar.lzma]/out[/home/app/sys_app.tar.lzma] ioctl faild. errno[5] tar: unexpected EOF tar: short read mv: can't rename '/home/app/res/*': No such file or directory ---------- show logo ---------- tar: can't open '/home/app/logo.tar.gz': No such file or directory Open /home/app/logo.jpg failed: No such file or directory scriptCmd: ./load3531a -i 0. a is a85f b is 0xffe20884 DS_7216HQH_F_N mmz allot OK DS_7216HQH_F_N OR DS_7116HQH_F_N load3531A start check adNum tp2802:0,tp2806:0,tp2822:0,tp2823:0,tp2824:0,tp2833C:4,tw2964:0 tw29 68:0 nvp6114a:0 nvp6124b:4 cmdBuf:insmod extdrv/tp2823.ko gpioType=0 cmdBuf:insmod extdrv/nvp6124b.ko insert audio load3531A end load 3531a ok / ---------- del no use res ---------- Can't open parameter file on flash, errno=0x2. iSCSI daemon with pid=1188 started!cp: can't stat '/home/app/exec/diald': No suc h file or directory initrun: start diald-----------! /home/start.sh: line 89: /home/app/exec/diald: not found Segmentation fault getPPPOECfg: from /home/app/config/devCfg.bin ok. remove pppoed! ==================enablePPPoE failed!!!

[@beniptec]

Send me serial number i will give you the correct fw and format flash before upload the fw

[@nabilbounezaf4692]

acor1await