Gracias por el video y aprender a buscar solución de reparación.
@zelkokarcsi267928 күн бұрын
I was having problem with doorbell DSKV6113 doorbell was not ringing but indoor station its showing image,the fix was you need to update lastest software for indoor station I did exactly like in video but when i was try to write activation admin pass its show please read hikvision terms and conditions No problem i did activation from indoor station itself set new IP(DHCP) set SIP pass and my time zone where I live so didnt even need to activate doorbell separeted it works at first press Need to mention they booth have Eth cable connected to same router I just write this to inform if someone is searching for exact problem BIG THANKS TO YOU !
@jumanji-yt5808Ай бұрын
showing error please help solved this problem *** Warning - bad CRC, using default environment Hit ctrl+u to stop autoboot: 0 ### CRAMFS load complete: 3589208 bytes loaded to 0x42000000 ## Booting kernel from Legacy Image at 42000000 ... Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Thu Jan 1 00:23:58 UTC 1970 Starting udev: [ OK ] sdbg: serverip:192.0.0.128 fastboot is BusyBox v1.2.1 Protect Shell (psh) Enter 'help' for a list of davinci system commands. # / ----------<1> tar guir webs ---------- ded in[/home/hik/sys_app.tar.lzma]/out[/home/app/sys_app.tar.lzma] ioctl faild. errno[5] tar: unexpected EOF tar: short read mv: can't rename '/home/app/res/*': No such file or directory ----------<2> show logo ---------- tar: can't open '/home/app/logo.tar.gz': No such file or directory Open /home/app/logo.jpg failed: No such file or directory scriptCmd: ./load3531a -i 0. a is a85f b is 0xffe20884 DS_7216HQH_F_N mmz allot OK DS_7216HQH_F_N OR DS_7116HQH_F_N load3531A start check adNum tp2802:0,tp2806:0,tp2822:0,tp2823:0,tp2824:0,tp2833C:4,tw2964:0 tw29 68:0 nvp6114a:0 nvp6124b:4 cmdBuf:insmod extdrv/tp2823.ko gpioType=0 cmdBuf:insmod extdrv/nvp6124b.ko insert audio load3531A end load 3531a ok / ----------<4> del no use res ---------- Can't open parameter file on flash, errno=0x2. iSCSI daemon with pid=1188 started!cp: can't stat '/home/app/exec/diald': No suc h file or directory initrun: start diald-----------! /home/start.sh: line 89: /home/app/exec/diald: not found Segmentation fault getPPPOECfg: from /home/app/config/devCfg.bin ok. remove pppoed! ==================enablePPPoE failed!!!
@beniptec13 күн бұрын
Send me serial number i will give you the correct fw and format flash before upload the fw
@JTEKTNYCАй бұрын
Thank you man, Worked like a charm.. Cheers!!
@reevestechАй бұрын
i so much understand YOUR ILUSRTATION BOSS
@sundarg66402 ай бұрын
My hikvision dvr light is on further it does not boot and I don't know the Ip address. What to do?
@beniptec2 ай бұрын
This isseu sometimes dsp or flash ic
@buga89man232 ай бұрын
hikvision ds-7216hqhi-f2/n cant upgrade with tftp server,i use an usb serial rs458 usb with 2 pin when i open putty doesn't conect,my question i need a crossover internet cable to use tftp server?
@beniptec2 ай бұрын
Yes u need to plug network on your pc for data transfering
@senorpepper12 ай бұрын
Hi please help, I have a DS7616NI-I2 with no 12v to board and no 52v to POE. PSU is good, please advise which diodes I should check?
@beniptec2 ай бұрын
What is the issue your facing plz note the issue
@senorpepper1Ай бұрын
Hi, I checked the power supply which is working fine but nothing on the board is working.
@senorpepper117 күн бұрын
Can you help with this please?
@manafsaidusaidu99503 ай бұрын
Hi sir, same nvr 12v short, 12 volt drops to 4 voltage.. Any solution pls.
@beniptec2 ай бұрын
Chk new adaptor first then second power circuit ic and surge diode protector and chk dsp temp
@ianlamont23203 ай бұрын
Why do I only see my Indoor station and not the door station when both are connected to the same switch - On the indoor station I can see the camera on live view but cannot make calls from Door Station - Calling Failed message - Please help
@beniptec2 ай бұрын
Update the indoor station firmware and reset all then setup again
@zero13ro4 ай бұрын
Thanks man!! I was struggling with this issue for 3 days, no clue about that time sync between the units. All ok now, finally!
@shaporqq42624 ай бұрын
Excellent work, sorry sir, I have a question about the Hikvision camera ip poe. When it is connected, the AI works continuously without interruption, with no reading on the device. What do you think, where does the problem error ? thanx
@beniptec2 ай бұрын
What you mean device not detecting this camera or isseu for AI?
@Aldoraine314 ай бұрын
Hi, I have a DS-7608NXI-I2/8P/S which ports 5-8 have no POE, 1-4 work fine, any help would be great ?
@beniptec2 ай бұрын
I will chk this isseu for you later i will reply
@HOSSAMx774 ай бұрын
hello friend first thank you so much for your videos sec. i have problem with 5 ip camera hikvision model : ds-2cd2t55fwd-i8 all 5 cam poe light work on switch but no data link light also stuk on ir light can you send e-mail to send you pic and video
@beniptec2 ай бұрын
This isseu for firmware boot only solution upload firmware using rs232 cable and used hyper terminal
@FayazSharifi-wk7ed4 ай бұрын
که به موبایل بن میکنم
@FayazSharifi-wk7ed4 ай бұрын
تنها خود کمره😊
@FayazSharifi-wk7ed4 ай бұрын
مشکل نیست کمره ره بیارین بیرون که کدام لین است
@FayazSharifi-wk7ed4 ай бұрын
اگر برتان
@rahulkumar-mk7oc5 ай бұрын
Can you share me dvr modal no
@charlesjoshua7276 ай бұрын
Please help me on my request bellow👇👇👇👇please.
@charlesjoshua7276 ай бұрын
Thanks for the video. I have Hikvision PoE nvr model - DS7732NI-K4/16P with same issue, it has 52Vdc but I could not find the said diode on the board how do I go about it Sir. I really need your help urgently. thanks.
@beniptec5 ай бұрын
send picture main board
@rupeshgaming8796 ай бұрын
Rip
@rechineegalang91166 ай бұрын
What is the value of POE protection component?
@beniptec2 ай бұрын
Surge protect diode you can removed
@mansourmohmed28257 ай бұрын
from where we can get this diod spare part
@kinlee51117 ай бұрын
My nvr DS-7604NI-K1/4P port 1 poe not working. The other 3 ports are fine. The poe page shows a red cross on port 1. What is the problem?
@beniptec7 ай бұрын
check the diode for port 1
@sameersharma76328 ай бұрын
Calling failed tell me the process for this issue My device - DS-KH6320-WTE1
@beniptec8 ай бұрын
update the firmware latest version
@beniptec8 ай бұрын
google type this mode ver 2.2.20
@beniptec8 ай бұрын
type model
@beniptec8 ай бұрын
used batchconfiguration tools
@sameersharma76328 ай бұрын
Can you make a dedicated video for this
@ruquiyyasaifi33969 ай бұрын
I am unable to add the device in batch configuration!!
@beniptec9 ай бұрын
used ivms4200
@sivasubramaniamg72859 ай бұрын
Excellent. It works perfectly. Thank you for this public service
@nitsab11 ай бұрын
I have NVR POE not working the same you but I can not do
@beniptec10 ай бұрын
model ?
@user-he3gh4so3d11 ай бұрын
This problems how to fix without pc.?
@beniptec11 ай бұрын
need to update firmware to latest version 2.2.20 required pc
@user-lw7oy5fz6s11 ай бұрын
I do the same process, its not working...my devices are ds-km9503 and ds-kv6113
@beniptec11 ай бұрын
this different configuration for guardstation km9503
@devinpatel5342 Жыл бұрын
my Nvr 3 ports working and other 13 not working is this a same issue?
@beniptec Жыл бұрын
model please
@beniptec Жыл бұрын
this another issue just share me the model
@n-p2048 Жыл бұрын
Contact Number/Details?
@rayloaded Жыл бұрын
Thank you Sir, I tried it and it worked :)
@djian4100 Жыл бұрын
Diode po ba ang tatagalin ko send ko po yung video ng nvr ko
@beniptec Жыл бұрын
video mo nga sir send mo whattsapp ko 00971501665113
@djian4100 Жыл бұрын
Sir ask ko lng po no power din yung nvr ds 7600 ko pag open iilaw sandali ang cam tapos wala n ilaw ang poe
@beniptec Жыл бұрын
try un plug un ipcam mo at tesf mo pa isaisa baka may short sa isa mo cam if ganun parin chk mo un diode protec sa poe baka short or leak
@djian4100 Жыл бұрын
Minsan po pag nag reebot ako ng nvr meron ilaw ang poe ko pero after mga.ilan minutes wala n lahat ilaw poe
@beniptec8 ай бұрын
model b nyan
@beniptec8 ай бұрын
bili k n lng board sakin
@djian4100 Жыл бұрын
Kabayan ask ko lngme lng po ba yung sa poe ng nvr ds7609 tatangalin n diode? Pag
@beniptec Жыл бұрын
sir iba iba un problema sa poe ng nvr minsan un driver ic sa poe. need talaga troubleshoot
@djian4100 Жыл бұрын
Hello sir puwede ko po pa gawa sa inyo ang akin nvr same issue po sa poe
@beniptec7 ай бұрын
baka sir gusto nyo bumili ng cctv sakin cheap price
@user-wq2yq4lj7x Жыл бұрын
mraming salamat bro God bless
@blackdotkiller1 Жыл бұрын
Excellent help thank you 👍
@omartaylor2975 Жыл бұрын
The diode is there for protection i thaough you were going to replace it
@beniptec Жыл бұрын
bridge diode if shorted required to replace but if the protector diode even not it will work but if you have replace
@user-de8oj7vk3f Жыл бұрын
I have an ip camera that has a LED that lights up, but it doesn't show up
@beniptec Жыл бұрын
share led video
@kingkarthik2759 Жыл бұрын
I purchased new intercom system but within 2 days its happend😒😒😒
@beniptec Жыл бұрын
which model DS-KH6320? and what issue
@TestTEST-is9xp Жыл бұрын
Thank you man,
@786kasimbk Жыл бұрын
Mobile not calling
@beniptec Жыл бұрын
try delete device and unistalled hikconnect apps then install new version apps and try
@alexts2102 Жыл бұрын
I have the same problem. It is calling only if the hik-connect app is running on screen. Do you have any other ideea? Thanks
@beniptec Жыл бұрын
update firmware latest version
@beniptec Жыл бұрын
share to me model and fw version
Жыл бұрын
Do you maybe know part number of entire board? I got my damaged. Thank you.
@solhash Жыл бұрын
Obrigado
@metragame1412 Жыл бұрын
Hello, I am writing to you from Ukraine. I am a beginner radio amateur, I want to learn how to repair IP cameras. tell me TPS2376H it is possible to check in the circuit. I connect the camera to the PoE switch, there is no activity. Diodes and suppressor checked.
@beniptec Жыл бұрын
check load side dsp if not shorted if ok replace tps 2376h but make sure cable is ok. first filter 52 volts and output 12 but if only 3 volts something wrong on dsp
@beniptec Жыл бұрын
that is basi test if first filterbno voltage replace tps
@beniptec Жыл бұрын
chk also bridge diode
@nicolamanca1354 Жыл бұрын
I tried two different poe ipcams on all 4 poe ports of the nvr but they don't work. I had to power the ipcams via an external poe switch. Do you think my nvr is broken? How can I fix it? The model of the nvr is Hikvision HWN-4108MH-8P (4 ch) Thank you
@beniptec Жыл бұрын
check all diode near to poe port if ok the ic controller poe isseu or resistor