Upgrading my RidStar brakes (better wheelies)

[@XBLHAX]

I bought my Ridstar because of you man. I bought the 1500 w 20AH version. i love it

[@Tsiky_0]

Nice video man🔥 Can u make a tut on how to change the speedometer ?? like how to put it on the side like urs

[@Gunna.111]

@@Tsiky_0 that is in my first video

[@skyescg]

Bro I love ur channel so much. I’ve been watching for forever and I love the upgrades u made on this bike. I got my own ridstar a few months ago and love it! I’m getting some upgrades this Christmas including ur throttle. Love ur channel and hope u have an amazing day!❤❤❤

[@Gunna.111]

Thank you bro! I appreciate your consistent support! Hope you get some good mods for Christmas

[@fariyuh]

bro thank you so much i needed this so bad

[@LukeKlaas]

I can’t wait until you rebuild your Redstar. You should upgrade the power put a bigger battery and bigger motor 72 V or just bigger motor.

[@RoccoUtley-zp6zr]

When r u gonna post again

[@D1ridstarr]

Does ur pedal assist still work even with the new battery

[@wrldbzr5668]

do i need 180 or 160 mm rotors for these brakes?

[@Ck-fq2oc]

If I buy front and rear will I need to 2 rotors or just 1

[@Gunna.111]

@@Ck-fq2oc 2 rotors

[@BanditBikes-11]

hi gunna im getting the pitbike bars just like you and i want to add metal bar ends do you know the inside messerment of the bars because the bars are tigher and i want to know what barends fit because my bars got delayed.

[@Gunna.111]

@@BanditBikes-11 the opening is very small and not made for most bar ends, I’ll get the measurements and let you know

[@BanditBikes-11]

@ ok thanks

[@ARfishes87]

did you take off brake sensor

[@G.I.O_..]

Do u think brakes with 74 mm mounting points would fit on the bike’s 75 mm mounting points

[@Movies_Shorts991]

can you make a video on how to install a seat cover

[@Gunna.111]

@@Movies_Shorts991 I believe that’s part of my first video, go check it out

[@Champ_next_door]

can you make a tutorial on how to add a new light like yours and a screen?

[@Champ_next_door]

also do you need new rotors? to wheeliee

[@Gunna.111]

You need new rotors for the new brakes

[@Gunna.111]

I will but the screen instal is in my first video and the light is pretty simple

[@QuantyX]

Yo bro I hope u see this , just a quick question if I remove my lights will I lose my horn and do I just snip the wires? What about the brakes because I got sensors on mine and if I were to snip it would anything happen and will my tail lights still work when I hit the brakes? If you can’t answer these questions I don’t blame you electric stuff is complicated

[@Gunna.111]

@@QuantyX I have a video on my tiktok on how to remove the brake sensors, basically just unplug them under the seat, also for the headlight you do loose the horn and you just unplug it as well

[@Bryc4nn]

wake up gunna posted

[@81djensen]

Hello. Great videos you make. I ordered my Q20 yesterday. So let's see how long it takes to get it to Sweden. But have a question about your headlight. I see you removed yours. Is it just such a normal plug in connector to the lamp so you just have to take it off and pull the lamp out of the connector? Sincerly

[@Gunna.111]

@@81djensen I just took off the light and unplugged it, the new light is rechargeable and does not plug into the bike, hope this helps

[@81djensen]

@Gunna.111 ok. I thought it connected to the bike. Thanks for answering

[@LLW-hm9yx]

If I buy the alternative upgraded breaks would i need new rotors

[@Gunna.111]

@@LLW-hm9yx yes

[@QuantyX]

5:53 can’t you just get shimano mt200 brakes where the back brake is on the left

[@Gunna.111]

@@QuantyX yes as long as the hoses are 1700 mm for the rear

[@seertimes]

when are you goinmg to restock the full twist throttle on your website?

[@Gunna.111]

@@seertimes yes but they sell out very fast, I’m planning on restocking before Christmas but stay tuned to my insta for more info

[@RidingwithJr]

Where did you get that? Pk sticker because when I get a sticker for my battery, it leaves like this shiny thing around the sticker and you can’t take it off. Can you tell me where you get that?

[@Gunna.111]

@@RidingwithJr use goo gone to remove the residue and the pk sticker is from peak clothing

[@D1ridstarr]

Are you going to put more products on ur website

[@Gunna.111]

@@D1ridstarr yes I plan too

[@D1ridstarr]

@ ok perfect I’m excited

[@KevinT1]

Hi gunna, did you remove da break sensors?

[@Gunna.111]

@@KevinT1 yes I did a while ago, there’s a video pinned on my tiktok

[@mello.-.6516]

Im wanting to get a ridstar star but not sure if i should get the 1500w or 1000w if i get the lower watts one i can get upgrades and a helmet and gloves also did you wire the front light bar to the bike controller?

[@Gunna.111]

@@mello.-.6516 i recommend the 1500w cause you get better brakes range and suspension for only a little more, and my headlight is not wired it has a battery in it

[@sweatplayz5331]

Is that thing on the right handlebar is that a gear shifter? I just got a q20 and i dont know what it is

[@Gunna.111]

@@sweatplayz5331 yes it is a gear shifter got the pedals, it won’t do anything electronically

[@RowanTaylor-pp8ci]

Do you know if I could put your full twist throttle on another bike that’s really similar to the ridstar do you think that’s possible, because I was thinking about buying one

[@Gunna.111]

Maybe, depends on the connectors but if you message me on insta we can figure it out

[@Kaishredz14]

Hey does the star mods throttle grip come off so I could put a pro taper grips

[@Gunna.111]

@Kaishredz14 yes you just need to cut it off

[@Kaishredz14]

@ okay thanks

[@Fw.david94]

Does the speedometer in the ridstar work on the ouxi

[@Gunna.111]

@@Fw.david94 yes but you need one with a different connector

[@Fly_With_Andersen]

do you know if it has a brown wire /speed controoler

[@Gunna.111]

No there’s no speed limiter wire on this bike

[@Fly_With_Andersen]

@ OK because you know I’m gonna cut it if there was

[@RoccoUtley-zp6zr]

My brakes on the ridstar are always engaged do you know how to fix that

[@Gunna.111]

@@RoccoUtley-zp6zr might be misaligned but I’m not too sure

[@RoccoUtley-zp6zr]

Ok thank you also did you have to put oil in the brakes

[@RidingwithJr]

Can u put a 60v battery on the ridstar?

[@RidingwithJr]

Because I’m planning to get one

[@Gunna.111]

@@RidingwithJr probably but you might need a new controller, 52v battery’s are pretty good

[@RidingwithJr]

@@Gunna.111 alr

[@RidingwithJr]

Why do I need a new controller?

[@Gunna.111]

@ I’m not sure but I don’t think you would get that much more speed from a 60v without upgrading the motor and/or controller

[@neji_u2895]

Which ones are those grips?

[@Gunna.111]

@@neji_u2895 a.co/d/7FYEB9Q

[@MotoMaxwell22]

do you have the strock forks?

[@Gunna.111]

@@MotoMaxwell22 yes

[@vinamose6204]

Is that the 52v on?

[@Gunna.111]

@@vinamose6204 no I have a 48v 25ah right now, my 52v can’t charge

[@OuxiV8_Jake]

W

[@ShaunLove-h3u]

What’s the top speed

[@Gunna.111]

30mph

[@Montañezyahir]

When you restocking the full throttle

[@Gunna.111]

@@Montañezyahir gonna be another 1-2 weeks

[@rivr-est2055]

Yo bro I noticed a pk sticker. Do you know dns irl?

[@Gunna.111]

@@rivr-est2055 I do not, just support his brand

[@rid.seyram]

Yes Bro w

[@kwancolon]

Are they hydraulic breaks?

[@Gunna.111]

Yes they are hydros

[@kwancolon]

@Gunna.111 sweet, are the forks stock?

[@Gunna.111]

@ yes these are stock

[@sweatplayz5331]

Do your pegs come with bolts and nuts? If not, what size bolts and nuts should I get?

[@Gunna.111]

@@sweatplayz5331 they do not and I recommend going to the hardware store with the bike and test fitting nuts and bolts

[@TannerBarnhard81]

first

[@sd_super_s2]

The stock brakes were so bad, upgraded to Sram. Best decision ever 😂