@@CraftyGeckocan I purchase the hands that hold the masks for the spider-men or they sold out?
@CraftyGecko6 ай бұрын
@@incognito4354 they'll be back in stock in the new year, im hoping to have them back on the 2nd of January
@s1y226 ай бұрын
You never cease to surprise me! Everytime you make me want to do these lol, god bless you doing these figures what Hasbro couldn't.
@CraftyGecko6 ай бұрын
Thank you so much!
@s1y226 ай бұрын
@@CraftyGecko no problem!
@LandonRicketss6 ай бұрын
I got mine a week ago at my local sears here in Mexico, and this is the video I’ve been looking for ever since. Fantastic job 👏🏾👏🏾 i wish i had the skill to do that myself
@CraftyGecko6 ай бұрын
Thank you so much!
@twitchvr4116 ай бұрын
THANK YOU, i did the leg mod to mine and it works absolutely great. it doesn't spin the ball joint and its perfect!
@CraftyGecko6 ай бұрын
I'm glad it helped!
@paulmccarthy38026 ай бұрын
Wow , he looks absolutely amazing. Great work pal 😎😎.
@CraftyGecko6 ай бұрын
Thank you!
@Spider-Drip6 ай бұрын
Its always a good day when you upload my dude!
@CraftyGecko6 ай бұрын
Haha thank you!
@CYeoung6 ай бұрын
looks incredible, exactly like the movie
@CraftyGecko6 ай бұрын
Thanks!
@s2knightryder5 ай бұрын
It’s a shame Hasbro didn’t make the spider chest symbol the correct size. It’s supposed to be larger to fill in the gap between spiderweb lines.
@CraftyGecko5 ай бұрын
I didnt even notice that
@s2knightryder5 ай бұрын
I wasn’t aware either until some other people pointed it out, but something did seem off about the absent space on his chest.. then I had to go back and see the final swing scene myself. Good opportunity for someone with a 3D printer 😉 😂
@spiderknight4136 ай бұрын
Bro, nice!!!
@CraftyGecko6 ай бұрын
Thanks!
@spidermanenjoyer6 ай бұрын
Nice work as usual
@CraftyGecko6 ай бұрын
Thanks!
@benparfittvideo5 ай бұрын
Just found your channel and I'm delighted - I'm learning so much, thank you! Can I ask what tool you're using to trim the plastic please? In fact, I don't suppose you've done a video detailing your typical modding toolkit by chance? An idea if not, perhaps? Keep up the amazing work, mate.
@CraftyGecko5 ай бұрын
Thank you so much! The tool I use is called a rotary tool, mines just a cheap one I got from amazon since it doesn't have to cut anything particularly hard. I don't have a video on good a toolkit but that's something I should do
@mikaelh7306 ай бұрын
good job man
@CraftyGecko6 ай бұрын
Thank you!
@ImaHeatseekr6 ай бұрын
The articulation on these spiderman figures is just cheeks bro 😂 well done!
@CraftyGecko6 ай бұрын
Thank you! Hasbro has really messed up a bit
@elicker6946 ай бұрын
You did a nice work fixing all the problems! Though, i have a question. Would you mind explaining how to mod the neck peg and also the leg peg in more detail? I couldn't understand how to do jt in the video.
@CraftyGecko6 ай бұрын
kzbin.info/www/bejne/ppiciGd-l9l9l9U this video has more detail. The neck I dont modify. I modified the neck socket by removing material with a blade
@Your_Homie_Logan6 ай бұрын
Love your videos! Will you be making some painted stuff for your Etsy shop?
@CraftyGecko6 ай бұрын
Thank you! I will be adding painted stuff, im working on updating 3d files at the moment and getting everything unpainted to start with
@alejandrocartagenaalgarra15096 ай бұрын
Great work as always. So definitely it's not possible to improve the torso articulation?
@CraftyGecko6 ай бұрын
Thanks! I couldn't remove it no
@Chaucer896 ай бұрын
I have a few questions.... Did you sand any, or, does the paint rub? I feel like mine always rub and distort a bit at the joints. I probably don't give it long enough to dry though. How does the new paint job hold up to heat when putting back together? Or, how do you re-assemble after painting?
@CraftyGecko6 ай бұрын
I sanded anywhere that was blue just to help with paint adhesion. You should really aim for 24 hours before reassembling but I usually leave it around 6. If the paint isn't properly dry the heat will soften it quite a bit, but I didn't have any issue with this one in particular
@user-vr3iv9li4x6 ай бұрын
Great Work. Just curious, are the PS5 Iron arms going to be on Etsy?
@CraftyGecko6 ай бұрын
Thanks! They will be, im hoping to have some up in the next few days
@SoldierBoy_snippet6 ай бұрын
Man you should sale these man I’m afraid mines will break
@CraftyGecko6 ай бұрын
I wish I could but they take so long to make, I would have to charge a lot
@AlexSanchez-vs2vs6 ай бұрын
Is there any way to assemble the figure without scratching the new paint? I tried with a hair dryer but the paint melts, when I try to pose the figure, it scrapes off the paint and falls off.
@CraftyGecko6 ай бұрын
You may be applying too much heat, its much easier to use hot water as dry heat can be harmful
@aidangarcia76986 ай бұрын
How can i make the water hot without boiling it?
@CraftyGecko6 ай бұрын
You can boil it and then let it cool down a bit, or you can use the microwave
@Crown8656 ай бұрын
Great job on the figure but I have one question. Could you check out the Medicos Diego Brando figure? It has very limited neck and leg movement and I dont know how I would go about fixing it.
@CraftyGecko6 ай бұрын
Thank you! As much as I would like to help out, I wouldn't be able to afford it at the moment, it's around £100+ where I am
@Crown8656 ай бұрын
@@CraftyGeckoDamn that sucks. Thank you for responding though
@cathalmccusker90396 ай бұрын
this is sick ! When will the shop be back open on Etsy ?
@CraftyGecko6 ай бұрын
Thanks! I'm aiming for the 2nd of January
@cathalmccusker90396 ай бұрын
@@CraftyGecko nice nice ! Have you considered making upgrades for the symbiote suit like the symbiote coming over the suit/ mask or tendrils ? I think that would be cool
@CraftyGecko6 ай бұрын
Which symbiote? The retro one?
@cathalmccusker90396 ай бұрын
@@CraftyGecko the ps5 game one, I think the way you attached the iron arms onto the Spider-Man could be used to make some tendrils, or you could also make the symbiote coming over the head like the hot toys special edition that would be cool !
@CraftyGecko6 ай бұрын
Oh right, that could actually work!
@FatherJoshua5 ай бұрын
Is there a way I can heat the water up without the kettle and if so is there a good way to tell if the water is hot enough without damaging paint cause I wanna do this to mine but I’ve never done an articulation mod on a figure so I’m worried I’ll mess up. Also what do I use to cut the parts off for the part on the shoulders and the hip joint what tool is it I use?
@CraftyGecko5 ай бұрын
Hot water from the tap might do it. However you make a cup of tea or coffee would probably do, stove or microwave? I just eyeball whether it's too hot. It needs to be above drinkable, below simmering. I'm petty sure all the tools are in the video but a scalpel or a pair of wire cutters would do
@FatherJoshua5 ай бұрын
@@CraftyGecko thank you so much i really like this figure and wanted to make it better. so thanks again for the help!
@FatherJoshua5 ай бұрын
@@CraftyGeckosorry to bother you again but what size wire cutters do you suggest to be good to use for the figure
@CraftyGecko5 ай бұрын
I suggest small wire cutters, the kind that usually come with 3d printers. Also don't microwave water, I've just googled it and it's not very safe. I do sometimes but I don't recommend it
@tnvasion78246 ай бұрын
❤
@CraftyGecko6 ай бұрын
❤️
@strawhatpaul9396 ай бұрын
4:17
@CraftyGecko6 ай бұрын
Thanks
@dennybarkleysoueu6 ай бұрын
I want to buy two of this, because i want one of the two of action figure final swing spider man no way home to make a custom mcu symbiote spiderman
@CraftyGecko6 ай бұрын
Theyre good figures once you've modified them
@dennybarkleysoueu6 ай бұрын
@@CraftyGecko to make a stop motion movie fan made spiderman 4 home alone
@ForestElfLegoАй бұрын
My figure broke, I’m so pissed.
@CraftyGeckoАй бұрын
Thats so annoying
@user-gl8qz1xm4q6 ай бұрын
I believe hasbro knows and counts on using these rigid balls in their joints to break, hoping customers will buy more products. It's an absolute disgusting tactic. Great review, gonna help out tremendously so my son's figure doesn't break!!!
@CraftyGecko6 ай бұрын
Thank you! It is a dirty tactic
@Legend_King__6 ай бұрын
How much bro? I will buy it
@CraftyGecko6 ай бұрын
It's not finished yet
@Legend_King__6 ай бұрын
@@CraftyGecko i mean where you buy it and how much😅
@Legend_King__6 ай бұрын
@@CraftyGecko but if you sale it 1$ to me i will buy it😹