Upgrading the Silverado with DL3 Denali power Fold Mirrors .

[@Wpbandy]

Thank you my man 👌🏽 what about if you don’t have an alarm like you did ?

[@gabestang]

Find another wire that turns on with the accessory switch on .

[@jrr5127]

How you do the puddle light

[@gabriellujan3578]

Howd you pin it to the main harness? Im having a hard time doing this. All wire is ran but its a special connector and cant source locally

[@gabestang]

@@gabriellujan3578 yes youll need the right (style) pin connector and its just plug n play . Into the harness connector . I got mine an old wire harness i had laying around . But u can order the pins on ebay too .

[@EdgarRuiz-gu7ws]

Where do I connect the wire to the driver side for Terning signal

[@gabestang]

@@EdgarRuiz-gu7ws if i remember correctly, it’ll be the same pin slot top corner . It might be the opposite corner.i cant remember . But its going to be an empty slot . If its LS trim . LT trim and up should be there already . Turn on your hazards when testing

[@roclx]

what do you have to do for the mirrors to fold and the puddle light do you need a new harness with those wires i saw that you connected some but i didnt really understand much could you help me out

[@Joelle816]

Bro can you do a video on your cluster I noticed it looks was different would like to see more on it 🤔

[@gabestang]

I’ll have to make a review on it 💯. It’s a Denali cluster . All you need is the cluster/Right steering wheel buttons with harness. Pin one wire www.whiteautoandmedia.com/product-category/fullsizetruck/k2/ ⬆️ The link where you can order the cluster and get it programmed to the trucks Vin Number .

[@Joelle816]

@@gabestang thank you for the info bro ! Look forward to seeing more videos or yours 👍🏼

[@sicklifedesigns]

😊😊

[@danielk0106]

Is that just a card holder or what? The puddle light wouldn't work with the original key fob because you don't have factory remote start.

[@roadkinglobo]

So you had power folding mirrors OEM on your truck before you changed to the new mirror right?

[@gabestang]

I only had power mirrors b4. No fold or blinker . I upgraded to Denali mirrors that have a turn signal and powerful function. when you add the switch on the door panel it will communicate with the new mirrors and power fold.

[@roadkinglobo]

@@gabestang not to be a pain in the azz but do you have part #’s for the mirrors and the door switch? Thanks very much!

[@PRODLOUiE-ec7vl]

So the splicing you did was only for puddle light??

[@darkterro4888]

Why you have a card On top of the headlights switch ??

[@gabestang]

My trim is ls/wt . Card holder etc.-gas card -debit card -badges

[@Joelle816]

I want to do this but it seems really hard to do ☹️

[@eastpaloaltosfinest]

I believe there’s a guy out there that sells a whole new harness that just plugs n plays without any splicing needed

[@gonzv9829]

@@eastpaloaltosfinest What’s the guys name? How can I find him?

[@eastpaloaltosfinest]

@@gonzv9829 I have to look through my email, I was talking with him about a year ago. I’ll try to find it

[@danielonofre2640]

@@gonzv9829 boost auto bro they sell the harness and the switch separately it’s plug and play they show you how to install step by step

[@SanMario95]

@@gonzv9829 its Phil Gamboa, the harness dr

[@pablo4.8]

Did you do the same procedure for both sides?

[@gabestang]

Yes. They main thing is to pin the wire to the harness. The puddle light could be on any hot wire

[@pablo4.8]

@@gabestang even if the hot wire has constant power?

[@gabestang]

@@pablo4.8 try to find a hot wire that’s only on when the accessory is on not constantly on.

[@manuelpina9301]

What is the card slot for on dash next to the door on the driver's side?

[@calculatedcustoms]

Will this same technique work for a 2014 Silverado?

[@gabestang]

If you have power mirrors . It should . Make sure the door button matches your door harness and puddle light you will have to find a separate hot wire .

[@luisgutierrez5229]

bro i got the Ls work truck you think i’ll be about to connect it

[@gabestang]

Mine is a 2016 silverado LS trim . You should be able too.

[@remmymarin1366]

if i put complete harnes off the denali should just work ??

[@gabestang]

I would check diagrams to make sure all the pins and wires line up to your trucks trim package (WT/ LS/LT/LTZ)denali harness probably has more features like memory etc. my truck is an LS trim . Make sure to match up the power fold switch too .

[@philgamboa2906]

That won’t work. You’ll actually lose complete adjust on the passenger, 1/2 the adjust on driver, and power fold fold won’t work.

[@gabestang]

@@philgamboa2906 your videos have helped me out alot ! . Shout out to you bro !💯👍🏻 thank you.

[@ReptarART]

Can you do this on a work truck ?

[@gabestang]

If u have electric mirrors . You should be able to retrofit the folding mirrors along with the new fold switch button .

[@mrunknown4454]

I have the same mirrors on my sierra and I can’t get my puddle lights to work do you know any solutions that it might not work ?

[@gabestang]

If they already came with the truck , i would check the lighting settings on your head unit radio options. if you installed them yourself just make sure your wiring is connected on a a good hot(power) wire. That would be my best guess .

[@mrunknown4454]

@@gabestang yea man i did them myself but everything is wired good because the puddle lights do light up but not as bright as yours and I’m guessing it could be the bulb but idk ?

[@gabestang]

@@mrunknown4454 mines are led But i think they all are . I wouldn’t know why they are dim , led dont require to much power to fully light up .

[@mrunknown4454]

@@gabestang yea man I ask myself the same question maybe it could be the led not working and needs to be replace but I don’t know

[@guero2138]

it could be that they aren’t getting enough power. 2014 need an extra step

[@ManuelVazquez-ui6ou]

Yo what’s your IG? Where did you order the driver left Door master power window switch?

[@gabestang]

Gabestang - gm part #84643953 I ordered mine on ebay . Make sure harness matches your new switch

[@edwinslow17_36]

Around how much did you spend ?

[@gabestang]

Side mirrors set up $250-300

[@crewcabjonhy9728]

Sell me the chrome caps

[@gabestang]

Sold bro .