Upgrading to a Mistercade v2 Dual Ram in my Jamma Arcade Cabinet

[@KoncadeGaming]

Finally got the MisterCade v2 with Dual Ram support. 🎉❤

[@PixelCherryNinja]

Oh wow, great video and channel 😀

[@KoncadeGaming]

Hey bro glad you could stop by welcome

[@PixelCherryNinja]

@KoncadeGaming 😀

[@dotexe55games31]

Great video, I have been looking at the V2 I have the V1.2 Mistercade in my setup.

[@adamk3026]

Great work. Hopefully, I'll have an arcade system like this one day. Please keep these videos coming.

[@KoncadeGaming]

Thanks bro, 🤜🤛

[@Rhys-o4j]

Awesome video mate!!!!

[@KoncadeGaming]

Thanks a ton!

[@flain283]

Worth noting - no one needs dual ram currently. There isn't any core that really needs dual ram, it's a waste of money to kit out a MiSTer with dual ram today.

[@KoncadeGaming]

This unit supports both single and dual ram configuration, I do go through the setup guide which does cover both scenarios. It's just future proofing with additional features in v2

[@JayrosModShop]

How does this pull off dual-ram + VGA? Why can't standard MisTer do this?

[@KoncadeGaming]

The port that uses the second ram stick is normally used by the analog IO to give you video out, this unit uses the HDMI out and converts the signal to analog for jamma so that both ram sticks can be used at once and still output to jamma edge as normal.

[@rraboykarodrigo7612]

Is this Mistercade works pluging on the Supergun Jamma for use Neogeo DB15 controllers and CRT TV with component video input? Because I already have a Supergun Jamma with DB15 output and Neogeo db15 controllers that also works via Component CRT TV.

[@KoncadeGaming]

Yeah it will work just fine with a supergun

[@pedroTFP]

So as far as I know as of today MiSTercade in the only way to get dual ram and Jamma, right?

[@KoncadeGaming]

Irkenlabs Mister Jamma Expander also supports dual but I prefer Mistercade due to features, auto update of config mappings, look of product and overall support from Pork.

[@DrNoBrazil]

Poor packaging for something more than 250 USD...

[@KoncadeGaming]

The scratches on the PCBs due to packing were not ideal.

[@ripmatek]

Have you ever tried to connect this to a consumer CRT?

[@KoncadeGaming]

Not mistercade as it's more specific to use in arcade that support 15k or 31k via the jamma edge or the VGA port, if you are wanting to use a consumer crt you need misterfpga + the analog stack with a composite bridge or something that will convert the RGB to something crt will accept.

[@ripmatek]

@@KoncadeGamingyes I know this is more arcade machine specific… but I was wondering if it was still possible with the vga port.

[@KoncadeGaming]

Yes mistercade has a VGA out for 31K resolutions such as tri syncs monitors like a blast or atomiswave