Upholstering difficult shape van wall panels

[@JaYoeNation]

In this episode I continue to use the Nassimi Storm material and adhesive I got from PerfectFIT to coat the blank Adventure Wagon Panels for installation on my A-Frame interior kit at Just Roaming Design in Portland, Oregon. This episode has me working on some of the more complex shapes, figuring it out along the way. PerfectFIT: PerfectFIT.com Adventure Wagon: adventurewagon.com/ Just Roaming Design: www.justroamingdesign.com/ Facebook: facebook.com/JustRoamingConversions Instagram: instagram.com/justroamingdesign

[@saultopaul3981]

Thru the camera it was not a bad lookin headboard panel seam. 👍

[@小肉肉-w2e]

I do not care about van life a single bit.

[@Ole_ks]

Hi. I clicked your 19 min video for the difficult part. Which you cut all over and shortened a lot. That's what my thumb down for. I will watch your other videos thou ).

[@clark7117]

Having experience with design and model building you could use recycled paper rolls which come in 100', 300'', 600'+ (or newspaper, magazines) to lay over your work area. Once one panel is finished pull out a new sheet to length and you'll have a clean surface to work with each time.

[@JaYoeNation]

That would have worked better. Makes sense. I feel like I wasted a lot of scrap. Just glad I had scrap to waste.

[@clark7117]

@@JaYoeNation I just read that spraying (bottle) hot water on the fabric helps with forming. Also "Upholstery Tips How to Mold a car carpet? basic Upholstery tutorial" in youtube, this guy is a professional fabric installer.

[@JaYoeNation]

@@clark7117 ahhhh. Yea I bet there were a bunch of this that could have helped. Just tried my best.

[@mike76rob]

I came here to mention that, I used old rolls of wallpaper we had lying about at work as well as newspapers when I built out my van. Cracking job you done though.

[@petercua6158]

You have skill & talent... And patience.

[@andreb1605]

use a small round garbage can. smaller in diameter than your panels width.

[@EnclaveDesigns]

Reflectix is actually below r-1 if you install it the way you did.

[@zupp.social]

where is the link to those panels you bought from adventure wagon, i can't find it in their website

[@Shlomography]

What type of glue did you use?? 😮

[@JaYoeNation]

hmmm.. i looked at articles like this one www.businessinsider.com/john-mccain-refused-early-release-as-a-pow-in-vietnam-2018-8

[@tonynotstated695]

3:50 - use a paper liner like newspaper. There is a roll of 36" brown paper you can buy.

[@masterq2.033]

Practice certainly paid off , turned out totaly professional looking.

[@cherylcallahan5402]

*The JaYoe Nation Matt Gallet appreciate your videos Listening 🌟 from Mass USA TYVM 💙*

[@seechunchong9876]

Excellent choice of materials for your panel, looks like the same as my favorite business pants, super nice... Hahaha. JaYoe.

[@Devrossmane]

This video reminds me of doing UV maping and texturing for 3D models. I really like how you hid the seam by folding over the fabric, same thing is done in 3D modeling to hide seams.

[@vovachkanikolsky3092]

What about putting masking tape over the plastic board that you are using to catch the overspray and then re-taping each time rather than using a new board?

[@JaYoeNation]

those were all scrap boards... they were going to the trash anyway... so it was fine.

[@fjculver4413]

The flow of the lines in your material looks perfect on the panels. I think the decision to use a single piece on the headliner was a good one. You must be itching to finish it soon...

[@skyalien]

go to dollar tree they have lots large paper roll.

[@frankng4574]

Put a sheet under the panel then remove it after spray

[@Chemgettys]

I really like the fabric choice for your panels and good job by the way. How do you deal with condensation over time?

[@JaYoeNation]

I have a good HVAC system. Should help manage. But you can’t defend it all

[@Bikepacking]

wow that turn out amazing

[@tutumannyAQUE]

When people search for how to upholster curved pieces, they find your video but then you spend 20 minutes talking about your life, your errands your projects and who you are. I had to stop watching because I couldn't find a relevant piece of information. Your videos could really be more concise and to the point I think it would greatly help your channel.

[@bentcrazy39]

Rolling tiny house

[@frankng4574]

Almost there

[@wujiao8373]

Shouldn’t you be using a mask with that glue?

[@JaYoeNation]

it was a big open area... didnt smell so bad..

[@sandram9330]

Looking Good, I like your upholstery work. I give you an A+++++! I am impressed with the tedious work! A job well done! I am curious how is your daughter & wife doing?I hope that you are able to keep in touch, I am sure you just miss them! Good Luck with your travel!😊✅

[@ginawhite3728]

You could have at least put a plastic or a piece of woodgard as you spray it so that the extra glue goes up onto that guard and not until your work surface

[@prettyyoungthingpyt5015]

bro we wanna see China and interesting stuff in America. enough van. Do some investigation on homelessness or high housing cost, fuel price gouging. Interesting stuff. or overseas.

[@sengkk6965]

👍👍👍👍

[@adamsherman]

Get a roll of Kraft paper to setup on to avoid your overspray issue?

[@assmsn]

Used heavy plastic wrap your bored when you're done take the plastic off and put new plastic on problem solved

[@John77Doe]

First comment.

[@masterq2.033]

I'm here , you can start now.

[@tka1528]

How can you be gone from your wife & daughter for years on end, why not have them move to America or get a divorce so Annie can have a life

[@jmdoe5822]

Years? A year so far, I think. And Anny is coming to America with his daughter sometime in the near future, as far as I know. He has a seat in the van specially picked out for Eva. But somehow, I get the feeling you don't really give a fuck about any of that...

[@JaYoeNation]

who are you? do you know my life? sheesh...

[@brandonbrunious]

@@JaYoeNation just what you tell us. I don't know you, but I can see why this person is confused. Can't you?

[@colletteoconnor6516]

When are you going back to China matt

[@JaYoeNation]

Probably not for a while. But not forever