UPOL Raptor Liner bed liner Garage Work bench coating

[@mickeycruz912]

Would like to see a follow up report on how it’s holding up

[@MKSPerformanceOffroad]

We have since sold this home so I couldnt tell you how it is still holding up but as of last year it was doing great

[@grizgames6458]

I just made a set of concrete 45lb weights going to put a few coats of this on them to hopefully protect them from chipping hope it sticks well to cement

[@anthonyjames7100]

Raptor sticks extremely well to fresh clean concrete. No primer required.

[@bkingtz1]

​@@anthonyjames7100 What about an old concrete, and what primer would you use for it, also how does the raptor do against oil, diesel, gas, etc.? Thinking about spraying my garage concrete floor?

[@MountainMan802]

How did it hold up on the plywood? Did it stick good to the plywood?

[@MKSPerformanceOffroad]

Work extremely well, even sprayed the white on the floor of our trailer.

[@patrick4886]

How has it held up 1 year later on the wood? Has it peeled off? Anything you would do differently ?

[@MKSPerformanceOffroad]

It is doing great, no peeling at all and I have used the bench alot. I would spray another coat or 2 on it for thicker layer but other than that nothing else.

[@joepapa4108]

Still holding up I want to do the same thing but is it cracking or flaking

[@Kgoutdoor]

So you didn’t have to prime it with anything ?I have a wood deck for a trailer I was going to roll it on.

[@MKSPerformanceOffroad]

No sir, you can prime it if you want but I fid my bench top and enclosed trailer and it has held up great.

[@tyler2980]

Do you think this would help protect a door with a small dog scratching it from time to time?

[@MKSPerformanceOffroad]

Yes, as long as surface prep is good and you spray it thick enough.

[@mconfluence]

I was thinking of doing something similar to my wooden shed floor because of winter time use,but was afraid if it would cause my wood to rote from underneath. Because it is setting on a thick gravel pad not cement. Looks really good on your work bench

[@MKSPerformanceOffroad]

Marshall Rugg it has held up so awesome over the last few months, we sprayed this about 6 months ago but I will be spraying our enclosed trailer floor and we did spray the front and back of our camper fiberglass with the white also. That video will be coming soon. Is your plywood treated and or sitting off the ground like on skids?

[@mconfluence]

@@MKSPerformanceOffroad it is a pre built shed 14x30 foot. It has some kind of coating on it but it is light in color and shows all kinds of marks and I am afraid of water and oil getting in from the top but also afraid that if I seal up the top the bottom might rote.

[@MKSPerformanceOffroad]

Marshall Rugg if its a shed built by a company I dont think you would have an issue. I was going to do the same to my 8x12 shed as well but it sits pretty high with alot of airflow underneath. You might check with the company that built it to find out what they used. It should be treated.

[@mconfluence]

@@MKSPerformanceOffroad ok i will do that thank you

[@markg3305]

I thought about doing this on a set of outdoor stairs for my grandparents, not sure if it would be slip resistant enough tho 😬

[@MKSPerformanceOffroad]

You can change the texture with application pressure and how you spray it. I thought there might be a slip resistant additive I saw a while back as well.

[@dalegibbs8997]

i'm a pro carpenter been in business 33 years, in saying this..anyone using bedliner on wood it has way better results applying 2 coats of rolled on zinser bullseye primmer first..1st coat after dry sand it with 120 grit sand paper disc then recoat after the 2nd coat is dry sand it with 220 grit, now bedliner in 2 coats. comes out professional C.DaleGibbs

[@MKSPerformanceOffroad]

Absolutely agree, this was a quick test for a workbench with no prep what so ever. Happy with the results for what Im doing.

[@seanguild6528]

nice tip… planning on using raptor in my campervan garage area on top of 12mm ply board 👍🏻

[@dalegibbs8997]

@@seanguild6528 have fun, wear gloves cause every time i paint my face itches somewhere and you know you just have to scratch..

[@medicmike4906]

Do you have any recommendations on applying it to melamine on plywood? Thanks in advance.

[@Kgoutdoor]

Do you think I should use that primer on my wood decking on my trailer? I get my raptor liner tomorrow.

[@SOSM209]

KZbin Challenge! Looking good In the neighborhood. Big trucks and lots of Bucks Exclusive video training your way KZbin I’m here to stay. S.O.S.M. 👍🏼🚘🚚

[@uk_prepper6775]

Hi nice job, bench looks great! Is the raptor ok to use straight on the ply?

[@MKSPerformanceOffroad]

Yes, the surface is porous and rough enough that the raptor should adhere without issue. I haven’t had any issues thus far and I use my bench regularly.

[@uk_prepper6775]

@@MKSPerformanceOffroad thank you mate.

[@geoffrundlett1697]

two years later; how did it hold up?

[@MKSPerformanceOffroad]

Its good, I have had zero issues and use it daily. Makes a great work bench coating.

[@geoffrundlett1697]

@@MKSPerformanceOffroad thats really useful feedback, thanks!

[@segaboy9894]

No primer?

[@MKSPerformanceOffroad]

Didnt need it. The wood was pretty rough to begin with. You could primer it if you like.

[@2314jones]

Ummm. Uhhh. Ummm. It’s honestly hard to get past all the stammering bud. Appreciate the video but those buzz words were killer.

[@MKSPerformanceOffroad]

Everyone starts somewhere, appreciate the feedback.